대한안전경영과학회지 (Journal of the Korea Safety Management & Science)

  • 제9권5호
  • /
  • Pages.79-85
  • /
  • 2007
  • /
  • 1229-6783(pISSN)
  • /
  • 2288-1484(eISSN)
대한안전경영과학회 (Korea Safety Management & Science)
권호 표지

지능공작기계를 위한 가공 지식의 지식베이스 구성 및 운영

Building a Machining Knowledge Base for Intelligent Machine Tools

  • 이승우 (한국기계연구원 지능기계연구센터) ;
  • 이화기 (인하대학교 산업공학과)
  • Lee, Seung-Woo (Intelligent Machine Systems Research Center KIMM) ;
  • Lee, Hwa-Ki (Department of Industrial Engineering, INHA University)
  • 발행 : 2007.10.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Intelligent machines respond to external environments on the basis of decisions that are made by sensing the changes in the environment and analyzing the obtained information. This study focuses on the construction of a knowledge base which enables decision making with that information. Approximately 70% of all errors that occur in machine tools are caused by thermal error. In order to proactive deal with these errors, a system which measures the temperature of each part and predicts and compensates the displacement of each axis has been developed. The system was built in an open type controller to enable machine tools to measure temperature changes and compensate the displacement. The construction of a machining knowledge base is important for the implementation of intelligent machine tools, and is expected to be applicable to the network based intelligent machine tools which look set to appear sooner or later.

키워드

참고문헌

  1. 김선호, '지식기반형 지능화 기계와 지식진화형 지능화 기계', 한국정밀공학회지, 19 (2002):17-25
  2. 한국기계연구원 연구보고서, 지식진화기반 지능제조설비 및 인터넷 통합관리기술(1),(2), 과학기술부, 2004
  3. 이승우, 송준엽, 이화기, 김선호, '공작기계지능화를 위한 에이전트 기반 의사결정지원시스템', 산업경영시스템학회지, 29 (2003):87-93
  4. Wang, Huaiqing, 'Intelligent Agent-Assisted Decision Support System: Intelligent of Discovery, Knowledge Analysis and Group Analysis', Expert System with Applications, 12 (1997):323-335 https://doi.org/10.1016/S0957-4174(96)00103-0
  5. Ranjit Bose, 'Intelligent Agents Framework for developing Knowledge-Based Decision Support System for Collaborative Organizational Processes', Expert System with Applications, 11 (1996):247-261 https://doi.org/10.1016/S0957-4174(96)00042-5
  6. Bui, T. and Lee, J., 'An Agent-Based Framework for Building Decision Support System', Decision Support Systems, 25 (1999):225-237 https://doi.org/10.1016/S0167-9236(99)00008-1
  7. 박홍석, '에이전트 기술 응용 Shop Floor 제어방안', 한국정밀공학회지, 18 (2001):176-181
  8. 이재종, '공작기계의 열 변형 오차 모델링 기법', 한국정밀공학회지, 19 (2002):19-24
  9. 김희술, 고태조, 김선호, 김형식, 정종운, '회귀분석을 이용한 열 변형 오차 모델링에 관한 연구', 한국공작기계학회 추계학술대회 논문집, 1 (2002): 47-52
  10. 김희술, 고태조, 김형식, 김선호, '공작기계 주축열 변형 보정을 위한 실험방법에 관한 연구', 한국정밀공학회 추계학술대회, 1 (2001):300-304