Abstract
In this paper, we design a future mobile camera standard interface based on the MIPI CSI-2 and D-PHY specification. The proposed CSI-2 have the efficient multi-lane management layer, which the independent buffer on the each lane are merged into single buffer. This scheme can flexibly manage data on multi lanes though the number of supported lanes are mismatched in a camera processor transmitter and a host processor. The proposed CSI-2 & D-PHY are verified under test bench. We make an experiment on CSI-2 & D-PHY with FPGA type test-bed and implement them onto a mobile handset. The proposed CSI-2 & D-PHY module are used as both the bridge type and the future camera processor IP for SoC.
본 논문에서는 차세대 모바일 단말 카메라 표준 인터페이스인 MIPI CSI-2 및 D-PHY를 설계하였다. 제안된 CSI-2는 레인별로 존재하는 버퍼를 하나로 통합하여 송수신단이 지원하는 레인의 개수가 다른 경우에도 유연하게 관리 될 수 있는 멀티레인관리계층을 가진다. 설계된 CSI-2 및 D-PHY는 테스트 벤치를 통해 RTL 검증되었다. 또한 FPGA로 합성된 후 테스트 베드를 통해 기능 검증이 이루어 졌으며, 실제 단말기에 적용하여 동작 여부를 확인 하였다. 설계된 CSI-2 및 D-PHY 모듈은 브리지 형태로 제공되어 기존의 카메라 센서와 호스트 프로세서와 오프 칩 형태로 사용할 수 있을 뿐 아니라, 차세대 모바일 카메라 컨트롤러와 온 칩 화 가능한 IP 형태로도 사용 가능하다.