Journal of Mechanical Science and Technology

  • 제20권10호
  • /
  • Pages.1670-1679
  • /
  • 2006
  • /
  • 1738-494X(pISSN)
  • /
  • 1976-3824(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지

A Study on Development of Advanced Environmental-Resistant Materials Using Metal Ion Processing

  • Fujita Kazuhisa (Ion Engineering Research Institute Corporation) ;
  • Kim Hae-Ji (Graduate School of Mechanical Engineering, Gyeongsang National University)
  • 발행 : 2006.10.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The development of the oxidation, wear and corrosion resistant materials that could be used in severe environmental conditions is needed. The elementary technologies for surface modification include ion implantation and/or thin film coating. Furthermore, in order to develop ion implantation technique to the specimens with three-dimensional shapes, plasma-based ion implantation (PBII) techniques were investigated. As a result, it was found that the ion implantation and/or thin film coating used in this study were/was effective for improving the properties of materials, which include implantations of various kinds of ions into TiAl alloy, TiN films formed on surface of base material and coatings in high-temperature steam. The techniques proposed in this study provide useful information for all of the material systems required to use at elevated temperature. For the practical applications, several results will be presented along with laboratory test results.

키워드

참고문헌

  1. Adler, R. J. and Picraux, S. T., 1985, 'Repetitively Pulsed Metal Ion Beams for Ion Implantation,' Nuclear Instruments and Methods in Physics Research Section B : Beam Interaction with Materials and Atoms, Vol. 6, pp. 123-128 https://doi.org/10.1016/0168-583X(85)90621-4
  2. Haanappel, V. A. C. and Stroosnijder, M. F., 1998, 'The Effect of Ion Implantation on the Oxidation Behavior of TiAl-based Intermetallic Alloys at $900^{\circ}C$' Int. J. of Surface and Coatings Technology, Vol. 105, pp. 147-154 https://doi.org/10.1016/S0257-8972(98)00472-1
  3. Klingenberg, M., Arps, J., Wei, R., Demaree, J. and Hirvonen, J., 2002, 'Practical Applications of Ion Beam and Plasma Processing for Improving Corrosion and Wear Protection,' Int. J. of Surface and Coating Technology, Vol. 158-159, pp. 164-169 https://doi.org/10.1016/S0257-8972(02)00194-9
  4. Kyung, W. L., Jae, S. B., Yeong, S. Y. and Kyu, Z. C; 2004, 'A Study on the Mechanical Properties of Ti-8Ta-3Nb Alloy for Biornaterials,' KSME International Journal, Vol. 18, No. 12, pp. 2204- 2208 https://doi.org/10.1007/BF02990224
  5. Li, X. Y., Taniguchi, S., Zhu, Y. C. Fujita, K., Iwamoto, N., Matsunaga, Y. and Nakagawa, K., 2001, 'Effects of C, Nb and C+Nb Combined Ion Implantation on the Oxidation Resistance of ${gamma}-TiAl$ based Alloy,' Materials Science and Engineering, Vol. 316, pp. 224-230 https://doi.org/10.1016/S0921-5093(01)01232-1
  6. Li, X. Y., Taniguchi, S., Zhu, Y. C. Fujita, K., Iwamoto, N., Matsunaga, Y. and Nakagawa, K., 2001, 'Oxidation Behavior of TiAI Protected by Si+Nb Combined Ion Implantation,' Intermetallics, Vol. 9, pp.443-449 https://doi.org/10.1016/S0966-9795(01)00024-3
  7. Li, X. Y., Taniguchi, S., 'Zhu, Y. C. Fujita, K., Iwamoto, N., Matsunaga, Y. and Nakagawa, K., 2002, 'Oxidation Behavior of TiAI Protected by AI and Nb Combined Ion Implantation at High Temperature,' Nuclear Instruments and Methods in Physics Research Section B : Beam Interactions and Materials and Atoms, Vol. 187, pp.207-214 https://doi.org/10.1016/S0168-583X(01)00934-X
  8. Oh, S. M., Rhee, B. G. and Jeong, B. S., 2003, 'Wear Behaviors of Ceramics TIN, TIC and TICN with Arc Ion Plating,' KSME International Journal, Vol. 17, No. 12, pp. 1904-1911
  9. Perez, P., Haanappel, V. A. C. and Stroosnijder, M. F., 2001, 'Formation of an Alumina Layer on a FeCrAIY alloy by Thermal Oxidation for Potential Medical Implant Applications,' Int. J. of Surface and Coatings Technology, Vol. 139, pp.207-215 https://doi.org/10.1016/S0257-8972(00)01169-5
  10. Rhee, K. Y., Chi, C. H. and Yang, J. H., 2000, 'A Study on the Surface Treatment of Prepreg with Ar+ion to Increase Mode I Fracture Characteristics of Fiber-Reinforced Composites,' Transaction of the KSME, Vol. 24, No. 11, pp.2771-2776
  11. Rhee, K. Y., Yang, J. H., Yoon, C. S. and Choi, N. S., 2002, 'A Study on the CFRP Treatment by Ion Assisted Reaction Method to Improve T-pell Strength of CFRP/ Aluminum Composites,' Transaction of the KSME, Vol. 26, No. 3, pp. 570-575 https://doi.org/10.3795/KSME-A.2002.26.3.570
  12. Schmutzler, H. J., Zheng, N., Quadakkers, W. J. and Stroosnijder, M. F., 1996, 'The Influence of Niobium ion implantation on the High Temperature Oxidation Behavior of Ti-48AI-2Cr,' Int. J. of Surface and Coatings Technology; Vol. 83, pp.212-217 https://doi.org/10.1016/0257-8972(95)02755-6
  13. Taniguchi, S., Kuwayama, T., Zhu, Y. C., Matsumoto, Y. and Shibata, T., 2000, 'Influence of Silicon Ion Implantation and Post-implantation Annealing on the Oxidation Behavior of TiAl under Thermal Cycle Conditions,' Materials Science and Engineering, Vol. 277, pp. 229-236 https://doi.org/10.1016/S0921-5093(99)00542-0
  14. Taniguchi, S., Uesaki, S., Zhu, Y. C., Zhang, H. X. and Shibata, T., 1998, 'Influence of Niobium ion Implantation on the Oxidation Behavior of TiAl Under Thermal Cycle Conditions,' Materials Science and Engineering, Vol. 249, pp.223-232 https://doi.org/10.1016/S0921-5093(98)00567-X
  15. Taniguchi, S., Uesaki, S., Zhu, Y. C., Matsumoto, Y. and Shibata, T., 1999, 'Influence of Implantation of Al, Si, Cr or Mo Ions on the Oxidation Behavior of TiAl Under Thermal Cycle Conditions,' Materials Science and Engineering, Vol. 266, pp. 267-275 https://doi.org/10.1016/S0921-5093(99)00042-8
  16. Tuszewski, M., Scheuer, J. T. and Adler, R. A., 1997, 'A Pulsed Inductively Coupled Plasma Source for Plasma-based Ion Implantation,' Int. J. of Surface and Coating Technology, Vol. 93, pp.203-208 https://doi.org/10.1016/S0257-8972(97)00045-5
  17. Wei, R., 1996, 'Low Energy, High Current Density Ion Implantation of Materials at Elevated Temperature for Tribological Applications,' Int. J. of Surface and Coatings Technology, Vol. 83, pp.218-227 https://doi.org/10.1016/0257-8972(95)02828-5
  18. Zhu, Y. C., Fujita, K., Iwamoto, N., Nagasaka, H. and Kataoka, T., 2002, 'Influence of Boron Ion Implantation on the Wear Resistance of TiAlN coatings,' Int. J. of Surface and Coatings Technology, Vol. 158- 159, pp. 664-668 https://doi.org/10.1016/S0257-8972(02)00238-4
  19. Zhu, Y. C., Fujita, K., Iwamoto, N., Nagasaka, H. and Kataoka, T., 2002, 'Influence of Boron Ion Implantation on the Wear Resistance of TiAlN coatings,' Int. J. of Surface and Coatings Technology, Vol. 158- 159, pp. 664-668 https://doi.org/10.1016/S0257-8972(02)00238-4
  20. Zhu, Y. C., Li, X. Y., Fujita, K., Iwamoto, N., Matsunaga, Y., Nakagawa, K. and Taniguchi, S., 2002, 'The Improvement of the Oxidation Resistance of TiAl alloys by Fluorine Plasma-based Ion Implantation,' Int. J. of Surface and Coatings Technology, Vol. 158-159, pp. 503-507 https://doi.org/10.1016/S0257-8972(02)00288-8