초록
본 논문에서는 폴리머 광도파로 열 격자(arrayed waveguide grating: AWG)를 나노임프린트 방법을 이용하여 제안하고 구현하였다. 빔전파방법을 도입하여 소자를 설계하고 해석하였다. 균일한 접착 및 분리 특성을 갖는 임프린트용 PDMS(polydimethylsiloxane) 스탬프(stamp)를 쿼츠 글래스 물질로 만들어진 마스터 몰드를 이용하여 개발하였다. 이 PDMS 스탬프로 폴리머층을 눌러서 소자 패턴을 형성하고 폴리머를 스핀코팅하여 소자를 완성하였다. 이러한 소자는 식각공정 없이 간단한 스핀코팅과 임프린트 공정만으로 만들어지기 때문에 대량 생산에 적합할 것이다. 제작된 폴리머 AWG 소자의 출력 채널 수는 8개, 채널 간격은 0.8nm, 각 채널의 중심파장은 1543.7nm $\sim$ 1548.3nm 였다. 평균적인 채널 누화와 대역폭은 각각 $\sim$10dB와 0.8nm였다.
A polymeric arrayed waveguide grating (AWG) has been proposed and demonstrated by exploiting the nanoimprint method. A PDMS(polydimethylsiloxane) stamp with device patterns engraved was developed out of a master mold made of quartz glass. The device was fabricated by transferring the pattern in the PDMS stamp to a spin-coated polymer film without using any etching process. The device had 8 output channels, while the center wavelengths of each output channel were positioned from 1543.7 nm to 1548.3 nm with the spacing of 0.8 nm. The achieved average channel crosstalk and the 3-dB bandwidth were about 10 dB and 0.8 nm respectively.