Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the Determination of Material Property by Cylinder Compression Test

원기둥 압축 시험을 통한 소재의 물성치 평가에 관한 연구

  • 차도성 (서강대학교 대학원 기계공학과) ;
  • 최홍석 (서강대학교 대학원 기계공학과) ;
  • 김낙수 (서강대학교 기계공학과)
  • Published : 2006.09.01
Download PDF
⟨ Previous Next ⟩

Abstract

In the study, the flow stress of material and friction condition were determined by using the cylinder compression test and numerical method. We proposed the flow stress equation including the initial yield strength to predict it from the upper bound method. The upper bound technique uses the velocity field which includes two unknowns to effectively express bulging. Also, inverse engineering technique uses the object function to minimize area enclosed by load-stroke curve. The friction factor is determined from the radius of curvature of the barrel by cylinder compression test. Flow stress and initial yield strength predicted from the above techniques are verified through the finite element simulation.

Keywords

References

  1. Bugini, A., Maccarini, G and Giardini, C., 1993, 'The Evaluation of Flow Stress and Friction in Upsetting of Rings and Cylinders,' Annals of the CIRP., Vol. 42, No.1, pp. 335-338 https://doi.org/10.1016/S0007-8506(07)62456-1
  2. Lee, C. H. and Altan, T., 1972, 'Influence of Flow Stress and Friction upon Metal Flow in Upset Forging of Ring and Cylinders,' ASME. Transactions. J. of Engr.for Industry., p. 775
  3. Kim, N. S. and Kim, H. J., 2002, 'Metal Forming and Analysis,' 2002, Press. of Mun-Un Dang, pp. 136-144
  4. Hwu, Y. J., Hsu, C. T. and Wang, F., 1993, 'Measurement of Friction and the Flow Stress of Steels at Room and Elevated Temperatures by Ring Compression Tests,' J. Mater. Process. Technol., Vol. 37, No. 1, pp. 319-335 https://doi.org/10.1016/0924-0136(93)90099-R
  5. Rao, K. P. and Xu, W. L., 1995, 'Neural Evaluation of Friction and Flow Stress Adaptive to Ring Geometry,' JSME. International. Journal. Series A., Vol. 38, No.4, pp. 506-514
  6. Xu, W. L., Rao, K. P., Watanabe, T. and Hua, M., 1994, 'Analysis of Ring Compression Using Artificial Neural Network,' J. Mater. Process. Technol., Vol. 44, No. 3, pp. 301-308 https://doi.org/10.1016/0924-0136(94)90443-X
  7. Osakada, K., Kawasaki, T., Mori, K. and Taniguchi, N., 1981, 'Method of Determining Flow Stress under Forming Conditions,' Annals of the CIRP., Vol. 30, No. 1, pp. 135-138 https://doi.org/10.1016/S0007-8506(07)60910-X
  8. Choi, Y. M. and Kim, N. S. 1994, 'Determination of Flow Stress and Friction Factor by the Ring Compression Test (II),' Journal of the KSTP., Vol. 3, No.2, pp. 215-226
  9. Choi, Y., Kim, H. K., Cho, H. Y., Kim, B. M. and Choi, J. C., 1998, 'A Method of Determining Flow Stress and Friction Factor Using an Inverse Analysis in Ring Compression Test,' Journal of KSTP., Vol. 22, No.3, pp. 483-492
  10. Altan, T., Ngaile, G and Shen, G, 2005, 'Cold and Hot Forging, Fundamentals and Application,' ASM International, pp. 25-49, 67-89
  11. Altan, T., 2004, 'Material Properties and Cold Forging Lubricants,' Prepared for 2nd Cold and Warm Precision Forging Workshop
  12. Altan, T. and Cho, H. J., 2003, 'Simultaneous Determination of Flow Stress and Interface Friction by Finite Element Based Inverse Analysis,' Prepared for 53rd CIRP General Assembly
  13. Altan, T. and Cho, H. J., 2003, 'Determination of Flow Stress and Interface Friction at Elevated Temperatures by Inverse Analysis Technique,' J. Mater. Process. Technol., Vol. 170, pp. 64-70 https://doi.org/10.1016/j.jmatprotec.2005.04.091
  14. Ebrahimi, R. and Najafizadeh, A., 2004, 'A New Method for Evaluation of Friction in Bulk Metal Forming,' J. Mater. Process. Technol., Vol. 152, pp. 136-143 https://doi.org/10.1016/j.jmatprotec.2004.03.029
  15. Lin, S. Y. and Lin, F. C., 2003, 'Prediction of Fold Defect in Barreling F orrnations of Cylinder upsetting,' Finite Elements in Analysis and Design., Vol. 39, pp. 325-341 https://doi.org/10.1016/S0168-874X(02)00076-8
  16. Lin, S. Y. and Lin, F. C., 2003, 'Influences of the Geometrical Conditions of Die and Workpiece on the Barreling Formation during Forging-Extrusion Process,' J. Mater. Process. Technol., Vol. 140, pp. 54-58 https://doi.org/10.1016/S0924-0136(03)00728-3
  17. Ma, X., Barnett, M. R. and Kim, Y. H., 2003, 'Experimental and Theoretical Investigation of Compression of a Cylinder using a Rotating Platen,' International Journal of Mechanical Sciences., Vol. 45 pp. 1717-1737 https://doi.org/10.1016/j.ijmecsci.2003.12.003
  18. Kulkarni, K. M. and Kalpakjian, S., 1969, 'A Study of Barreling as an Example of Free Deformation in Plastic Working,' Journal of Engineering for Industry., pp. 743-754
  19. Schey, J. A., Venner, T. R. and Takornana, S. L., 1982, 'Shape Changes in the Upsetting of Slender Cylinders,' Journal of Engineering for Industry., Vol. 104, pp. 79-83 https://doi.org/10.1115/1.3185802
  20. Banerjee, J. K., 1985, 'Barreling of Solid Cylinders under Axial Compression,' Transactions of the ASME., Vol. 107, pp. 138-144 https://doi.org/10.1115/1.3260990
  21. Chen, F. K. and Chen, C. J., 2000, 'On the Nonuniform Deformation of the Cylinder Compression Test,' Transactions of the ASME., Vol. 122, pp. 192-197 https://doi.org/10.1115/1.482786
  22. Narayanasamy, R., Murthy, R. S. N., Viswanatham, K. and Chary, G. R., 1988, 'Prediction of the Barreling of Solid Cylinders under Uniaxial Compressive Load,' Journal of Mechanical Working Technology., Vol. 16, pp. 21-30 https://doi.org/10.1016/0378-3804(88)90136-2
  23. Narayanasamy, R. and Pandey, K. S., 1997, 'Phenomenon of Barrelling in Aluminium Solid Cylinders during Cold Upset Forming,' J. Mater. Process. Technol., Vol. 70, pp. 17-21 https://doi.org/10.1016/S0924-0136(97)00035-6
  24. Narayanasamy, R., Sathiyanarayanan, S. and Ponalagusamy, R., 2000, 'A Study on Barrelling in Magnesium Alloy Solid Cylinders during Cold Upset Forming,' J. Mater. Process. Technol., Vol. 101, pp. 64-69 https://doi.org/10.1016/S0924-0136(99)00473-2
  25. Malayappan, S. and Narayanasamy, R., 2004, 'An Experimental Analysis of Upset Forging of Aluminium Cylindrical Billets Considering the Dissimilar Frictional Conditions at Flat Die Surfaces,' Int. J. Adv. Manuf. Technol., Vol. 23, pp. 636-643 https://doi.org/10.1007/s00170-003-1584-3
  26. Kalpakjian, S., 1991, 'Manufacturing Processes for Engineering Materials,' Press of Addison-Wesley, pp. 166-188
  27. DEFORM 2D, version 8.0, 'DEFORM 2D version 8.0 user's manual
  28. Narayanasamy, R., and Ponalagusamy, R., 'Cold Forging,' Unpublished Report. Regional Engineering College. Tiruchirappalli. 620015. India
  29. Kim, T. J. and Kim, N. S., 2003, 'Determination of Material Properties of Tube using Inverse Engineering and Analytic Method in Tube Bulge Test,' Journal of KSTP., Vol. 27, No.9, pp. 1508-1516
  30. Arora, J. S., 1989, 'Introduction to Optimum Design,' McGraw-Hill. Inc., pp. 287-304, 316-319
  31. DEFORM 3D, version 5.0, 'DEFORM 3D version 5.0 user's manual