스펙트럼 감시를 위한 고속 탐색 디지털-IF FFT 수신기 설계 및 분석

A Design and Performance Analysis of the Fast Scan Digital-IF FFT Receiver for Spectrum Monitoring

  • 발행 : 2006.09.29

초록

A fast scan digital-IF FFT receiver at the radio communication band is presented for spectrum monitoring applications. It is composed of three parts: RF front-end, fast LO board, and signal processing board. It has about 19GHz/s scan rate, multi frequency resolution from 10kHz to 2.5kHz, and high sensitivity of below -99dBm. The design and performance analysis of the digital-IF FFT receiver are presented.

키워드

참고문헌

  1. J. Grajal, R. Blazquez, G. Lopez, J. M. Sanz, and M. Burgos, "Monobit receiver for electronic warfare", Proc. of the 11th IEEE Signal Processing Workshop, pp.138-141, Aug. 2001
  2. J. B. Y. Tsui, and J. P. Stephens, "Digital microwave receiver technology", IEEE Trans. Microwave Theory and Tech., Vol. 50, No. 3, pp.699-705, Mar. 2002 https://doi.org/10.1109/22.989955
  3. R. W. Jones et al., "Spectrum monitoring handbook", International Telecommunication Union(ITU), 2002
  4. R. A. Poisel, "Introduction to communication electronic warfare systems", Artech House, INC., pp.231-264, 2002
  5. A. Bonfanti, F. Amorosa, C. Samori, and A. L. Lacaita, "A DDS-Based PLL for 2.4-GHz frequency synthesis", IEEE Trans. Circuit and Systems, Vol. 50, No. 12, pp.1007-1010, Dec. 2003 https://doi.org/10.1109/TCSII.2003.820250
  6. H. Meyr and R. Subramanian, "Advanced digital receiver principles and technologies for PCS", IEEE Communications Mag., pp.68-78, Jan. 1995
  7. S. J. Erst, "Receiving systems design", Artech House, INC., pp.57-138, 1984
  8. D. Banerjee, "PLL performance, simulation, and design 3rd edition", National Semiconductor, 2003