International Journal of CAD/CAM

한국CDE학회 (Society for Computational Design and Engineering)
권호 표지

Simulation Based Production Using 3-D CAD in Shipbuilding

  • Okumoto, Yasuhisa (System Design Department, School of Engineering, Kinki University) ;
  • Hiyoku, Kentaro (Advanced Technology Integration Department, IHI Marine United Inc.) ;
  • Uesugi, Noritaka (Advanced Technology Integration Department, IHI Marine United Inc.)
  • 발행 : 2006.12.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The application of three-dimensional (3-D) CAD has been popularized for design and production and digital manufacturing has been spreading in many industrial fields. By simulation of the production process using 3-D digital models, which are the core of CIM (Computer Integrated Manufacturing) system, the efficiency and safety of production are improved at each stage of work, and optimization of manufacturing can be achieved. This paper firstly describes the concept of "simulation based production" in shipbuilding and also digital manufacturing; the 3-D CAD system is indispensable for effective simulation because ship structure is three dimensionally complex. By simulation, "computer optimized manufacturing" can be possible. The most effective fields of simulation in shipbuilding are in jobs where many parties have to cooperate, while existing two-dimensional drawings are hardly observed the whole structures due to interference between structures or equipment of complex shape. In this paper some examples of the successful application in IHIMU (IHI Marine United Inc.) are shown: assembly of a pipe unit, erection of a complex hull block, carriage of equipment, installation of a propeller, and access in an engine room.

키워드

참고문헌

  1. Hertel, E., Steinhauer, D. and Nienhuis, U. (2005), Simulation of Assembly Production at Shipyards, Proceedings of ICCAS 2005, 121-134
  2. Hiyoku, K., Suzuki, O., Hirano, H. and Ogawa, H, (2004), Production Process Simulation Using Three Dimensional CAD Model, Conference Proceedings, The Society of Naval Architects of Japan Vol.4, 21-22, (in Japanese)
  3. Jones, A. and Iuliano, M. (1997), A Simulation-Based Production Testbed, Proceedings of the 1997 Winter Simulation Conference, 1299-1306
  4. Okumoto, Y., (2002), Simulation Based Design and Production in Shipbuilding, Proceedings of TEAM2002 Kobe, 3-12
  5. Okumoto, Y., Iseki, R. and Hiyoku, K. (2003), Ship Production System Applying Wearable Computer, TEAM2003 Tainan, 501-508
  6. Okumoto, Y., Hiyoku, K., Suzuki, O. and Fujiwara, H. (2005), Application of RFID to Parts Managements, Conference Proceedings, The Society of Naval Architects of Japan Vol.5, (in Japanese),15-16
  7. Okumoto, Y. and Hiyoku, K. (2005), Digital Manufacturing of Pipe Unit Assembly, Journal of Ship Production, Vol.21, No.3, 141-145
  8. Seto, F., Itoh, M., Uesugi, N. and Hiyoku, K., (2002), States of Arts and Contribution to Productivity Improvement of CIM System 'AJISAI' in Ishikawajima-Harima Heavy Industries, Proceedings of ICCAS 2002, 1-15 (pdf)
  9. Thiel, M., Schulz, R. and Gmilkowsky, P., (1998), Simulation-Based Production Control in the Semiconductor Industry, Proceedings of the 1998 Winter Simulation Conference, 1029-1033
  10. Yonemitsu, T., Utsunomiya, T., Hattori, T., Shimizu, H., Nagao, Y., Ohta, H. , Honda, F. and Fukumoto, K.(1998), Development and Implementation of a Production Efficiency Evaluation System Based on Simulation Technology, Kawasaki Technical Review, No.138, (in Japanese), 103-108