Transactions of the Korean Society for Noise and Vibration Engineering (한국소음진동공학회논문집)

The Korean Society for Noise and Vibration Engineering (한국소음진동공학회)
권호 표지
DOI QR코드

DOI QR Code

Determination of the Dynamic Coefficients of the Coupled Journal and Thrust Bearings by the Perturbation Method

수학적 섭동법을 이용한 저널과 스러스트가 연성된 유체 동압 베어링의 동특성 계수 해석

  • Published : 2006.07.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper proposes a method to calculate the stiffness and the damping coefficients of the coupled journal and thrust bearings. The Reynolds equations and their perturbation equations are transformed to the finite element equations by considering the continuity of pressure and flow at the interface between bearings. The Reynolds boundary condition is used in the numerical analysis to simulate the cavitation phenomena. The dynamic coefficients of the proposed method are compared with those of the numerical differentiation of the loads with respect to finite displacements and velocities of bearing center. It shows that the proposed method is more accurate and efficient than the differentiation method.

Keywords

References

  1. Lund, J. W. and Thomsen, K. K., 1978, 'A Calculation Method and Data for the Dynamic Coefficients of Oil-lubricated Journal Bearings' , Topics in Fluid Journal Bearing and Rotor Bearing System, ASME, New York, pp. 1- 28
  2. Jang, G. H. and Kim, Y. J., 1999, 'Calculation of Dynamic Coefficients in a Hydrodynamic Bearing Considering Five Degrees of Freedom for a General Rotor-bearing System,' ASME J. Tribol., Vol. 121, pp, 499 - 505 https://doi.org/10.1115/1.2834095
  3. Zheng, T., and Hasebe, N., 2000, 'Calculation of Equilibrium Position and Dynamic Coefficients of a Journal Bearing Using Free Boundary Theory' , ASME J. Tribol, Vol. 122, pp. 616 - 621 https://doi.org/10.1115/1.555410
  4. Zirkelback, N., and San Andres, L., 1998, 'Finite Element Analysis of Herringbone Groove Journal Bearings: A Parametric Study,' ASME J. Tribol., Vol. 120, pp. 234-240 https://doi.org/10.1115/1.2834415
  5. Zang, Y. and Hatch, M. R., 1995, 'Analysis of Coupled Journal and Thrust Hydrodynamic Bearing Using Finite Volume Method,' ASME AISPS, pp. 71 - 79
  6. Rahman, M. and Leuthold, J., 1996, 'Computer Simulation of a Coupled Journal and Thrust Hydrodynamic Bearing Using a Finiteelement Method' , Proceedings of 25th Annual IMCSD Symposium, pp. 103 -112
  7. Oh, S. M. and Rhim, Y. C. 2001, ' The Numerical Analysis of Spindle Motor Bearing Composed of Herringbone Groove Journal and Spiral Groove Thrust Bearing,' KSTLE International Journal, Vol. 2, pp. 93 -102
  8. Jang, G. H, Lee, S. H. and Kim, H. W., 2006, 'Finite Element Analysis of the Coupled Journal and Thrust Bearing in a Computer Hard Disk Drive' , ASME J. Tribol., Vol. 128, pp. 335 - 340 https://doi.org/10.1115/1.2162918
  9. Kim, H. K., Lee, S. H. and Jang, G. H., 2005, 'Finite Element Analysis of a Coupled Hydrodynamic Journal and Thrust Bearing in a Computer Hard Disk Drive' , Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 15, No. 1, pp. 87 - 95 https://doi.org/10.5050/KSNVN.2005.15.1.087
  10. Hamrock, B. J., 1994, 'Fundamentals of Fluid Film Lubrication' , McGraw-Hili, New York