방사성폐기물학회지 (Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT))
- 제4권2호
- /
- Pages.103-116
- /
- 2006
- /
- 1738-1894(pISSN)
- /
- 2288-5471(eISSN)
Inconel 600 및 690 튜브 재질의 일반 부식에 관한 실험적 연구
An Experimental Research on Uniform Corrosion of Inconel 600 and 690 Tubing Material
- Yeom Yu-Sun (RadTek CO., LTD) ;
- Hwang Jung-Lae (RadTek CO., LTD) ;
-
Jun In-Sub
(RadTek CO., LTD) ;
- Kim Soong-Pyung (Chosun University) ;
-
Yoon Jang-Hee
(Busan Branch, Korea Basic Science Institute)
- 발행 : 2006.06.01
초록
본 논문은 국내 PWR 발전소에서 S/G tube 재질로 사용되고 있는 Inconel 600 및 690에 대한 부식 실험을 수행함으로써 작업자들의 주요 피폭원인
By executing corrosion experiment on Inconel 600, 690 used to material of S/G tube in domestic NPP, this paper show estimation of amount of product such as Co-58, Co-60, Cr-51, Mn-54, Fe-59 which are main exposure cause to the workers in NPP. Therefore, Making the 12 samples consisted of Inconel 600, 690, whole corrosion experiment was carried out for 60 days(each pH by 20 days). The conditions of those tests were similar or more harsh than actual conditions of domestic NPP. The Glow Discharge Spectrometer(GDS) was used for quantitative analysis of results. The results of using GDS, the Inconel 600 corrodes more than Inconel 690 at pH 7 and pH 9. However, it is observed that Inconel 690 corrodes more than Inconel 600 at pH 4. Those results is estimated that test sections had the effect of transient. The long terms of experiment is required to minimize and solve the problem.