Composites Research

  • 제19권3호
  • /
  • Pages.15-22
  • /
  • 2006
  • /
  • 2288-2103(pISSN)
  • /
  • 2288-2111(eISSN)
한국복합재료학회 (The Korean Society for Composite Materials)
권호 표지
DOI QR코드

DOI QR Code

폴리프로필렌/유리섬유 복합재료의 유변물성에 미치는 상용화제의 영향

The Effect of Compatibilizer on the Rheological Properties of Polypropylene/Glass-fiber Composites

  • 발행 : 2006.06.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

유리섬유로 강화된 폴리프로필렌 복합재료를 이축압출장치를 이용하여 제조하였으며 폴리프로필렌 수지와 유리섬유간의 결합성을 증대시키고 가공성을 향상시킬 목적으로 말레익 안하이드라이드(maleic anhydride) 결합기를 가지는 상용화제를 첨가하였다. 제조된 폴리프로필렌/유리섬유 복합재료에 대한 전단유동과 신장유동의 특성을 조사하였으며, 특히 상용화제 첨가와 유리섬유의 함량에 대한 영향을 주로 평가하였다. 전단유동에서 상용화제는 폴리프로필렌과 유리섬유간의 결합력을 증대시키고, 흐름성을 개선시키는 역할을 하였으며, 신장유동에서는 유리섬유의 함량이 증가됨에 따라서 신장점도를 더욱 증가시켜주는 역할을 하였다. 그러나 신장속도가 증가함에 따라서 유리섬유 사이에서 형성되는 미세한 전단유동의 영향으로 오히려 신장점도는 감소하였다.

In this study, we prepared glass fiber reinforced polypropylene composites using Brabender twin-screw extruder. Compatibilizer, polypropylene-based maleic anhydride (PP-g-MAH), was used to increase the molecular interaction between polypropylene matrix and glass fiber and to enhance melt processability. We also measured the shear and uniaxial elongational behaviors of glass-fiber reinforced composites in the absence or presence of compatibilizer. The effects of compatibilizer and fiber loading on the viscoelastic behaviors were examined. It was fuund that the PP-g-MAH compatibilizer improved the fluidity and increased the molecular bonding of composite melts in shear flow. Transient elongational viscosity was increased with fiber loadings in uniaxial elongational flow However, it was decreased with increasing elongational rates because of microscale shear flow between fibers.

키워드

참고문헌

  1. Karian, RG., Handbook of Polypropylene and Polypropylene Composites, 2nd ed., Marcel Dekker, Michigan, 2003, pp. 311-381
  2. Utracki, L.A., Two-Phase Polymer Systems, 2nd ed., Progress in Polymer Processing Series, 1990, pp. 305-331
  3. Dave. P., Chundury, D., Baumer, G., and Overley, L., 'Performance-Property of Novel Glass Fiber Reinforced Polypropylene Compounds and Their Applications,' J. Vinyl and Add. Tech., Vol. 2, No.3, 1996, pp. 253-257 https://doi.org/10.1002/vnl.10135
  4. Xie, RQ., Zhang, S., and Xie. D., 'An Efficient Way to Improve the Mechanical Properties of Polypropylene/Short Glass Fiber Composites,' J. Appl. Polym. Sci., Vol. 96, 2005, pp. 1414-1420 https://doi.org/10.1002/app.21575
  5. Rijsdijk, H.A., Contant, M., and Peijs, A.A.J.M., 'Continuous-glass-fiber-reinforced polypropylene composites: I. Influence of maleic-anhydride- modified polypropylene on mechanical properties,' Compos. Sci. Technol., Vol. 48, 1993, pp. 161-172 https://doi.org/10.1016/0266-3538(93)90132-Z
  6. Liang, Z., and Williams, H.L., 'Dynamic mechanical properties of polypropylene-polyamide blends: Effect of compatibilization,' J. Appl. Polym. Sci., Vol. 44, 1992, pp. 699-717 https://doi.org/10.1002/app.1992.070440417
  7. Laun, H.M., 'Orientation effects and rheology of short glass fiber-reinforced thermoplastics,' Colloid & Polymer Sci., Vol. 262, 1984, pp. 257-269 https://doi.org/10.1007/BF01410464
  8. Silvia, E.B., and Kenny, J.M., 'Rheology of thermoplastic matrix short glass fiber composites,' J. Vinyl and Add. Tech., Vol. 1(4), 1995, pp. 269-272 https://doi.org/10.1002/vnl.730010415
  9. Kalaprasad, G., Mathew, G., Pavithran, G., and Thomas, S., 'Melt Rheological Behavior of Intimately Mixed Short Sisal-Glass Hybrid Fiber-Reinforced LDPE Composite,' J. Appl. Polym. Sci., Vol. 89, 2003, pp. 432-442 https://doi.org/10.1002/app.11975
  10. Tselios, C.H., Bikiaris, D., Savidis, D., Panayiotou, D., and Larena, A., 'Glass-fiber reinforced of in-situ compatibilized polypropylene/polyethylene blends,' J. Mater. Sci., Vol. 34, 1999, pp. 385-394 https://doi.org/10.1023/A:1004434412273
  11. Tjong, S.c., Xu, SA, Li, R.K.Y., and Mai, Y.W., 'Mechanical behavior and fracture toughness evaluation of maleic anhydride compatibilized short glass fiber/SEBS/polypropylene hybrid composites,' Comps. Sci. Technol., Vol 62, 2002, pp. 831-840 https://doi.org/10.1016/S0266-3538(02)00037-4
  12. Gupta, AX., Kumar, P.K., and Ratnam, B.K., 'Glass-Fiber Reinforced PolypropylenelEPDM Blend,' J. Appl. Polym. Sci., Vol. 42, 1991, pp. 2595-2611 https://doi.org/10.1002/app.1991.070420925
  13. Shenoy, A.V., Rheology of Filled Polymer Systems, Kluwer Academic Publishers, Dordrecht, 1999, pp. 243-311
  14. Dealy, J.M., Wissbrun, K.F., Melt rheolgy and its role in plastics processing.: theory and application, Van Nostrand Reinhold, New York, 1990, pp. 103-152
  15. Liang, R.F. and Mackley, M.R., 'Rheological characterization of the time and strain dependence for polyisobutylene solutions,' J. Non-Newtonian Fluid Mech., Vol. 52, 1994, pp. 387-405 https://doi.org/10.1016/0377-0257(94)85031-3
  16. Takahashi, T., Takimoto, J., and Koyama, K., 'Elongational Viscosities of Random and Block Copolymer Melts,' J. Appl. Polym. Sci., Vol. 69, 1998, pp. 1765-1774 https://doi.org/10.1002/(SICI)1097-4628(19980829)69:9<1765::AID-APP11>3.0.CO;2-L
  17. Aoki, Y., Hatano, A., Tanaka, T., and Watanabe, H., 'Chain Relaxation Time in ABS Polymer Melts,' Macromolecules, Vol. 34, 2001, pp. 3100-3107 https://doi.org/10.1021/ma002076l
  18. Kamal, M.R., Mutel, AT, and Utracki, L.A., 'Elongational behavior of short glass fiber reinforced polypropylene melts,' Polym. Compos., Vol. 5(4), 1984, pp. 289-298 https://doi.org/10.1002/pc.750050408
  19. Haworth, B. and Astarita, G., 'Extensional flow characterisation and extrusion blow molding of high density polyethylene modified by calcium carbonate,' Plastics, Rubber and Composites, Vol. 28, No.8, 1999, pp. 363-378 https://doi.org/10.1179/146580199101540529
  20. Tanaka, H. and White, J.L., 'Experimental investigation of shear and elongational flow properties of polystyrene melts reinforced with calcium carbonate, titanium dioxide, and carbon black,' Polym. Eng. Sci., Vol. 20, No. 14, 1980, pp. 949-956 https://doi.org/10.1002/pen.760201406
  21. White, J.L., Czarnecki, J. and Tanaka, H., 'Experimental stuides of the influence of particle and fiber reinforcement on the rheological properties of polymer melts,' Rubber Chem. Tech., Vol. 53, 1980, pp. 823-835 https://doi.org/10.5254/1.3535062
  22. Nakajima, N., and Collins, B.A., 'Nonlinear viscoelastic behavior of butadiene- acrylonitrile copolymers filled with carbon black,' Rubber Chem. Tech., Vol. 51, 1978, pp. 322-334 https://doi.org/10.5254/1.3545837
  23. Takahashi, T., Takimoto, J. and Koyama,K., 'Uniaxial e1ongataional viscosity of various molten polymer composites,' Pozvm. Comps., Vol. 20, No.3, 1999, pp. 357-366