Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

A Study on the Development of SFF System based on 3DP Process

3차원 프린팅(3DP) 공정을 기반으로 한 임의형상제작(SFF) 시스템 개발에 관한 연구

  • 이원희 (한국기계연구원 정보장비연구센터) ;
  • 김정수 (부산대학교 대학원) ;
  • 이민철 (부산대학교 기계공학부) ;
  • 김동수 (한국기계연구원 정보장비연구센터)
  • Published : 2006.07.01
Download PDF
⟨ Previous Next ⟩

Abstract

Nowadays, Three dimensional printing (3DP) technique that is one of solid freeform fabrication (SFF) technology has been notable issue, and has been applied by various fields. The SFF system can fabricate three dimensional objects of solid freeform with high speed and low cost using ink jet printing technology. In this research, a SFF system to analyze 3DP process technology is developed. We applied sliding mode control with sliding perturbation observer (SMCSPO) algorithm and minimized position error to the developed SFF system. We analyzed and optimized process variables such as jetted volume, layer thickness, powder bed and so on experimentally. Also. the dimensional error of a developed SFF system is evaluated. Finally, the feasibility of application to bio manufacturing is presented through successful fabrication of teeth and cranium model.

Keywords

References

  1. Wohlers, T. T., 'Wohiers Report 2003, Wohlers Associates, pp.14-35, 2003
  2. Yan, X. and Gu, P., 'A review of rapid prototyping technologies and systems,' Compute Aided Design, Vol. 28, No. 4, pp. 307-318, 1996 https://doi.org/10.1016/0010-4485(95)00035-6
  3. Chang, C. C., 'Rapid prototyping fabricated by UV resin spray nozzles,' Rapid Prototyping Journal, Vol. 10, No. 2, pp. 136-145, 2004 https://doi.org/10.1108/13552540410527006
  4. Moura, T. J., Elmali, H. and Olgac, N., 'Sliding Mode Control With Sliding Perturbation Observer,' Journal of Dynamic System, Measurement and Control, Vol.119, pp.657-665, 1997 https://doi.org/10.1115/1.2802375
  5. You, K. S. and Lee, M. C., 'Sliding Mode Controller with Sliding Perturbation Observer Based on Gain optimization Using Genetic Algorithm,' Int. Journal KSME, Vol.18, No. 4. pp. 630-639, 2004
  6. Williams, P. A., 'A New Process To Fabricate Prototypes Directly From CAD Model,' PhD.Thesis, MIT, pp.12-46, 1990
  7. Kim, D. S., Lee, W. H., Ahn, Y. G., Jang, M. H. and Choi, K. H., 'Development of Digital 3D RODS and Process Technology,' J. of KSPE, Vol. 23, No 4, pp.183-190, 2006
  8. Lee, E. R., 'Microdrop Generation,' CRC press, pp.15-29, 2003
  9. Parker, C. R., 'Aerosol science and technology,' McGraw-hill, 1993
  10. Bredt, J. F., 'Binder Stability and Binder/Power Interaction in Three-Dimensional Printing,' PhD. Thesis, MIT, 1995