Abstract
The use of steel plates has been greatly increased in bridge construction, particularly for long-span bridges. For connections of those steel plates in the field, application of high-tension bold, such as M30, is highly demanded. However, the current steel construction specifications in Korea do not provide information for large-sized bolt connections. In order to evaluate the applicability of the large-sized high-tension bolt, this study experimentally investigates relaxation and slip behavior of M30 bolts with varying bolt size and plate thickness. In addition, internal compressive stress was computed using FEM analysis. The analyzed results were compared with the stress distribution measured from strain gages attached on bolts and bolt holes. From the study presented herein, the M30 high-tension bolts are anticipated to be successfully used with the relaxation less than 10% and the slip coefficient satisfying the specified limit.
장대교량 건설의 증가와 강교량의 합리화 추세에 따라 최근 후판 강재의 사용이 늘어가고 있다. 후판 부재의 현장이음에서는 M30 고장력볼트와 같은 대형볼트의 사용이 불가피하나 현재 국내 시방기준에는 대형볼트의 사용에 대한 규정이 없는 실정이다. 따라서 본 연구에서는 대형볼트인 M30 고장력볼트의 사용성을 검토할 목적으로 볼트의 크기와 부재의 판두께를 변수로 하여 릴렉세이션과 미끄러짐 거동을 시험적으로 분석하였다. 또한, 유한요소해석을 통하여 판두께의 차이에 따른 내부압축응력을 분석하였으며, 이를 볼트축과 볼트구멍 내벽에 부착한 변형률게이지로부터 얻어진 응력분포와 비교하였다. 그 결과 M30 고장력볼트를 사용한 경우에도 릴렉세이션은 10%를 초과하지 않았으며, 미끄러짐 계수도 시방기준을 초과하는 충분한 내력을 확보하는 것으로 나타나 사용상에 문제가 없는 것으로 판단된다.