Journal of the Society of Naval Architects of Korea (대한조선학회논문집)

The Society of Naval Architects of Korea (대한조선학회)
권호 표지
DOI QR코드

DOI QR Code

Skinning for Ship Forebody Modeling

선수부 선체형상 모델링을 위한 스키닝 연구

  • Jung, Hyung-Bae (Mokpo National University, Department of Naval and Marine Engineering) ;
  • Kim, Chan-Suk (Mokpo National University, Department of Naval and Marine Engineering)
  • 정형배 (목포대학교 선박해양시스템공학과) ;
  • 김찬석 (목포대학교 선박해양시스템공학과)
  • Published : 2006.06.20
Download PDF
⟨ Previous Next ⟩

Abstract

This paper presents NURBS skinning for the forebody of ship. NURBS skinning is guessed as a good method to generate the faired surface of ship forebody, but it is very problematic in real ship design to generate resonable surface of ship forbody using skinning, because there are lot of problem to apply skinning and to get reasonable surface. One of main problem is data arrangement with design data. Irregular serial contour data arise so serious compatibility problem of knot vector This paper suggests a whole process using skinning successfully in generating hull form of ship forebody This process includes how to make the data set for skinning and how to execute compatibility procedure.

Keywords

References

  1. 김동준, 1993, '형상계수에 의한 초기선형설계에 관한 연구,' 대한조선학회 논문집. 제 30권, 제 2 호, pp. 2024-2030
  2. 김동준, 윤태경, 1994, '선형의 순정기법에 관한 기초 연구,' 대한조선학회 논문집, 제 31 권, 제 2 호, pp. 15-21
  3. 김수영, 우일국, 1992, 'B-spline 곡면기법 이용한 곡면형산 도출,' 대한조선학회 논문집, 제 29 권,제 3호, pp. 1-14
  4. 박지선, 김동준, 1994, 'GC1곡면을 이용한 선형의 표현,' 대한조선학회 논문집, 제 31 권, 제 4호, pp 32-40
  5. 신현경, 박규원, 1991, 'Open 균일 B-spline 곡 면을 이용한 선체 곡면 표현에 관한 연구,' 대한조선학회 논문집, 제 28권, 제 2호, pp. 21-27
  6. 신현경, 박규원, 박호균, 김일환, 2000, 'NURBS 곡면을 이용한 선체표현에 관한 연구 - 자유곡면 가공기계 개발 (1),' 대한조선학회 논문집, 제 37권, 제 2호, pp. 109-117
  7. 윤병호, 서승완, 김원돈, 김광욱, 1985, 'B-spline을 이용한 선체 표면에 관한 연구,' 대한조선학회지, 제 22권, 제 3호, pp. 19-26
  8. 양중현, 이규열, 1997. '베지어 곡선모델(드카스텔죠 알고리즘)을 이용한 곡면통합 모델링 기법,' 대한조선학회 논문집, 제 34권, 제 4호, pp. 127-138
  9. 정형배, 1998, 'NURBS Surface Globallnterpolation 에 대한 한 방법:II,' 한국CAD/CAM학회 논문집, pp243-250
  10. Boehm, W., 1980, 'Inserting New Knots into B-Spline Curves,' CAD, Vol. 12, pp. 199-201
  11. Jung, H.B. and Kim, K.S., 2001, 'A New Parameterisation Method for NURBS Surface Interpolation,' International Journal of Advanced Manufacturing Technology, 16, pp. 784-790
  12. Lim, C.G., 1999, 'A Universal Parameterization in B-Spline Curve and Surface Interpolation,' Computer Aided Geometric Design, 16, pp. 407-422 https://doi.org/10.1016/S0167-8396(99)00010-2
  13. Park, H.J., Kim, K.S. and Lee, S.C., 2000, 'A Method for Approximate NURBS Curve Compatibility Based on Multiple Curve Refitting,' Computer-Aided Design, 32 (4), pp. 237-252 https://doi.org/10.1016/S0010-4485(99)00088-3
  14. Park, H.J., 2001, 'An Approximate Lofting Approach for B-Spline Surface Fitting to Functional Surfaces,' International Journal of Advanced Manufacturing Technology, 18(7), pp. 474-482 https://doi.org/10.1007/s0017010180474
  15. Park, H.J., Jung, H.B. and Kim, K.S. , 2004, 'A New Approach for Lofted' B-Spline Surface Interpolation to Serial Contour,' International Journal of Advanced Manufacturing Technology, 23, pp. 889-895
  16. Piegl, L. and Tiller, W., 1995, The NURBS Book, Springer, Berlin
  17. Piegl, L. and Tiller, W., 1996, 'Algorithm for Approximate NURBS Skinning, 'Computer-Aided Design, 28 (9), pp. 699-706 https://doi.org/10.1016/0010-4485(95)00084-4
  18. Piegl, L. and Tiller, W., 2000, 'Reducing Control Points in Surface Interpolation,' IEEE Computer Graphics and Applications , 20, pp. 70-74 https://doi.org/10.1109/38.865883
  19. Piegl, L. and Tiller, W., 2002, 'Surface Skinning Revisited,' Visual Computer, 18, Pp. 273-283 https://doi.org/10.1007/s003710100156
  20. Woodward, C., 1988, 'Skinning Techniques for Interactive B-Spline Surface Interpolation,' Computer-Aided Design, 20 (8), pp. 441-451 https://doi.org/10.1016/0010-4485(88)90002-4