Journal of Advanced Marine Engineering and Technology

  • 제30권3호
  • /
  • Pages.420-427
  • /
  • 2006
  • /
  • 2234-7925(pISSN)
  • /
  • 2234-8352(eISSN)
한국마린엔지니어링학회 (The Korean Society of Marine Engineering)
권호 표지

Gearless 터보기기용 200[kW], 30000[rpm] 유도전동기 설계 및 특성 해석

Design and Characteristic Analysis of an 200[kW], 30000[rpm] Induction Motor for Gearless Turbo Machine

  • 조원영 (동아대학교 전기공학과) ;
  • 우경일 (부경대학교 전기제어계측공학부) ;
  • 조윤현 (동아대학교 전기공학과)
  • 발행 : 2006.05.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper describes design and characteristic analysis of the 200[kW], 3000[rpm] induction motor for gearless turbo machine. It was designed by the loading distribution method and the results of characteristics obtained by the equivalent circuit method are compared with the results of circle diagram. To verify the validation of design 2D finite element method is used and also 3D finite element method is used to calculate the current density curve of the rotor bars when they are broken.

키워드

참고문헌

  1. 磯部直吉, '新版 電氣機器設計學', オ-ム社, 東京, 1966
  2. 山下善太郞, '交流機器の理論と設計', 新思潮社, 東京, 1966
  3. C. G. Veinott, 'Performance Calculation on Induction Motors', Trans. AIEE. Vol. 51, pp. 734-755, 1932
  4. A. F. Puchstein, 'Calculation of Slot Constant', Trans, AIEE, Vol. 66, pp. 1315-1323, 1947
  5. P. L. Alger, 'Stray Load Losses in Polyphase Induction Machines', Trans. AIEE part, Vol. 78, pp. 349-357, 1959
  6. K. K. Schwarz, 'Survey of Basic Stray Losses in Squirrel-cage Induction Motors', Proc, IEE, Vol. 111, No. 9, pp. 1'565-1574, 1964
  7. R. B. Robinson, 'Harmonics in A.C. Rotating Machines', Proc. IEE, Vol. 109, pt. C, pp. 380-387, 1962
  8. R. L. Norton, 'Machine Design', Prentice Hall, 2000
  9. K. Matsuse, 'Effect of Crosspath Resistance Between Adjacent Rotor Bars on Performance of Inverter-Fed High-Speed Induction Motor', IEEE Trans. on Industry Applications, Vol. 30, No. 3.pp.621-627, May/June, 1994 https://doi.org/10.1109/28.293710
  10. H. A. Toliyat, T. A. Lipo, 'Transient Analysis of Cage Induction Machines Under Stator, Rotor Bar and End Ring Faults', IEEE Transactions on Energy Conversion, vol. 10, No. 2. pp. 241-247 https://doi.org/10.1109/60.391888
  11. E. Michkin, 'Disturbances in the Induction Machine due. to Broken Squirrel Cage Rings' Journal Franklin Institute, 259, pp. 133-143, 1955 https://doi.org/10.1016/0016-0032(55)90921-2