References
- Kang, Y. T., Chen, W. and Christensen, R. N., 1996, Design of ammonia-water condenser with a fluted tube, ASHRAE Trans., Vol. 102, pp. 587-595
- Christensen, R. N., Cook, F. B. and Kang, Y. T., 1997, Capillary fluted tube mass and heat transfer devices and methods of use, US Patent No. 5617737
- Isshiki, N., Ogawa, K. and Ishikawa, M., 2002, Development of constant curvature surface (CCS) tubes and plates to get high absorption heat transfer, Proc. of the ISHPC, September 24-27, Shanghai, China, pp.295-299
- Shoji, M. and Zhang, X. Y., 1994, Study of contact angle hysteresis, JSME Int. J, Series B, Vol. 37, pp.560-567 https://doi.org/10.1299/jsmeb.37.560
-
Kim, J.-K., Park, C. W. and Kang, Y. T., 2003, The effect of micro-scale surface treatment on heat and mass transfer performance for a falling film
$H_2O$ /LiBr absorber, Int. J Refrig., Vol. 26, pp.575-585 https://doi.org/10.1016/S0140-7007(02)00147-0 - Kang, Y. T., Akisawa, A and Kashiwagi, T., 2000, Analytical investigation of two different absorption modes: falling film and bubble types, Int. J. Refrig., Vol. 23, pp.430-443 https://doi.org/10.1016/S0140-7007(99)00075-4
-
Moller, R. and Knoche, K. F., 1996, Surfactants with
$NH_3-H_2O$ , Int. J. Refrig., Vol. 19, pp.317-321 https://doi.org/10.1016/S0140-7007(96)00035-7 - Kim, K.J., Berman, N. S. and Wood, B. D., 1996, The interfacial turbulence in falling film absorption: effects of additives, Int. J. Refrig., Vol. 19, pp.322-330 https://doi.org/10.1016/S0140-7007(96)00025-4
- Choi, S. U. S., 1995, Enhancing thermal conductivity of fluids with nanoparticles, ASME, New York, FED-Vol. 231 / MD- Vol. 66, pp. 99-105
- Kim, J.-K., Jung, J. Y. and Kang, Y. T., 2005, The effect of nano-particles on the bubble absorption performance in a binary nanofluid, Int. J. Refrig., Vol. 29, No. 1, pp.22-29 https://doi.org/10.1016/j.ijrefrig.2005.08.006
-
Kim, J.-K., Jung, J. Y., Kim, J. H., Kim, M.-G., Kashiwagi, T. and Kang, Y. T., 2005, The effect of chemical surfactants on the absorption performance during
$NH_3/H_2O $ bubble absorption process, Int. J. Refrig., Vol. 29, No.2 - Bhavaraju, S. M., Russel, T. W. F. and Blanch, H. W., 1978, The design of gas sparged devices for viscous liquid system, AIChE J., Vol. 24, pp.454-466 https://doi.org/10.1002/aic.690240310
- McCabe, W. L., Smith, J. C. and Harriott, P., 2001, Unit Operations of Chemical Engineering, New York, McGraw-Hill
- Buonopane, R. A., Troupe, R. A. and Morgan, J. C., 1963, Heat transfer design method for plate heat exchangers, Chem. Eng. Prog., Vol. 59, No. 7, pp.57-61
- Jackson, B. W. and Troupe, R. A., 1964, Laminar flow in a plate heat exchanger, Chem. Eng. Prog., Vol. 50, No.7, pp.62-65
- Deckwer, W.-D., 1980, On the mechanism of heat transfer in bubble column reactors, Chem. Eng. Sci., Vol. 35, pp. 1341-1346 https://doi.org/10.1016/0009-2509(80)85127-X
- Akita, K. and Yoshida, F., 1974, Bubble size, interfacial area, and liquid-phase mass transfer coefficient in bubble columns, Ind. Eng. Chem., Proc. and Dev., Vol. 13, pp. 84-91