Journal of Mechanical Science and Technology

  • 제20권7호
  • /
  • Pages.993-1001
  • /
  • 2006
  • /
  • 1738-494X(pISSN)
  • /
  • 1976-3824(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지

A Method of Accurate Position Control with a Pneumatic Cylinder Driving Apparatus

  • Jang Ji-Seong (Division of Mechanical Engineering, Pukyong National University) ;
  • Byun Jung-Hoan (Faculty of Marine Technology, Chonnam National University)
  • 발행 : 2006.07.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper, a method of accurate position control using a pneumatic cylinder driving apparatus is presented. To overcome the effect of friction force and transmission line, low friction type cylinder applied externally pressurized air bearing structure is used and two control valves attached both side of the cylinder directly. To compensate nonlinear characteristics of control valves, linearized control input derived from the relation between control input and effective area of control valve, and dither signal are applied to the valve. The controller applied to the pneumatic cylinder driving apparatus is composed of a state feedback controller and a disturbance observer. Experimental results show that the effectiveness of the proposed method and position control error of $5{\mu}m$ accuracy could be obtained easily.

키워드

참고문헌

  1. Hanafusa, H., 1982, 'Design of Electrohydraulic Servo Control Systems for Articulated Robot Arm Control,' The Japan Hydraulics & Pneumatics Society, Vol. 20, No.7, pp.429-436
  2. Helduser, S. and Muth, A., 1996, 'Dynamic Friction Measurement Method Evaluated by Means of Cylinders and Valves,' Proceedings of the Third JHPS International Symposium on Fluid Power, pp. 271-276
  3. Jang, J. S., 2002, 'Position Control of a Pneumatic Cylinder with a Nonlinear Compensator and a Disturbance Observer,' Transactions of the KSME, A, Vol. 25, No.9, pp.1795-1805 https://doi.org/10.3795/KSME-A.2002.26.9.1795
  4. Johira, T., 1997, 'Pneumatic Servo System,' Transactions of the Japan Hydraulics and Pneumatics Society, Vol. 28, No.7, pp. 748-752
  5. Kawai, S., Kawakami, Y. and Masuda., 1993, 'Some Consideration on the Position Control of Pneumatic Cylinder,' Proceedings of the Second JHPS International Symposium on Fluid Power, pp.563-568
  6. Kawashima, K., Oogami, H. and Yang, W. J., 1998, 'Precision Intra-Stroke Stopping with a Precision of submicron in Pneumatic Cylinder,' Transactions of the Japan Hydraulics and Pneumatics Society, Vol. 29, No.4, pp.95-99
  7. Kimura, T., Fujioka, H., Tokai, K. and Takamori, T., 2004, 'Sampled-Data $H_{\infty}$ Control for a Pneumatic Cylinder System,' Transaction of the Japan Fluid Power System Society, Vol. 34, No.3, pp.62-65
  8. Kosaki, T. and Sano, M., 2002, 'Computation of Friction Force in a Labyrinth-Sealed Pneumatic Cylinder,' Transactions of the Japan Hydraulics and Pneumatics Society, Vol. 33, No.1, pp.9-14
  9. Lai, J. Y., Menq, C. H. and Singh, R., 1990, 'Accurate Position Control of a Pneumatic Actuator,' Journal of Dynamic Systems, Measurement and Control, Vol. 112, pp. 734-739 https://doi.org/10.1115/1.2896202
  10. McGuirk, D. P., Pingdong, W. and Xiao, X., 1998, 'Fluid Power in the world,' Journal of the Japan Fluid Power System Society, Vol. 29, No. 3, pp. 212-243
  11. Saito, T., Ikeda, H., Sugimoto, H. and Ikebe, J., 1995, 'A Study on the Low Velocity Control of A Pneumatic Cylinder,' Journal of the Japan Hydraulics and Pneumatics Society, Vol. 26, No. 6, pp. 804-810 https://doi.org/10.5739/jfps1970.26.804
  12. Situm, Z., Pavkovic, D. and Novakkovic, B., 2004, 'Servo Pneumatic Position Control Using Fuzzy PID Gain Scheduling,' Journal of Dynamic Systems, Measurement and Control, Vol. 126, pp. 376-387 https://doi.org/10.1115/1.1767857
  13. Tokashiki, L. R., Fujita, T., Kagawa, T. and Ikegami, T., 2000, 'Stick-Slip Motion in Pneumatic Cylinder Driven by Meter Out Circuit,' Transactions of the Japan Fluid Power System Society, Vol. 31, No.6, pp. 170-175
  14. Yoshimitu, T. and Oyama, O., 2002, 'Discrimination and Control of a Pneumatic Cylinder under Stick or Slip Mode of Seal,' Transactions of the Japan Fluid Power System Society, Vol. 33, No.3, pp. 57-62 https://doi.org/10.5739/jfps.33.57