Journal of Surface Science and Engineering (한국표면공학회지)

The Korean Institute of Surface Engineering (한국표면공학회)
권호 표지

Corrosion Behavior of Aluminium Coupled to a Sacrificial Anode in Seawater

희생양극 하에서 알루미늄의 해수 부식 거동

  • Kim Jong-Soo (School of Materials Sci. & Eng. Hongik University) ;
  • Kim Hee-San (School of Materials Sci. & Eng. Hongik University)
  • 김종수 (홍익대학교 금속공학과) ;
  • 김희산 (홍익대학교 금속공학과)
  • Published : 2006.02.01
Download PDF
⟨ Previous Next ⟩

Abstract

Al-Mg alloy, an open rack vaporizer(ORV) material was reported to be corroded in seawater environments though the ORV material was coupled to thermally sprayed Al-Zn alloy functioning a sacrificial anode. In addition, the corrosion behavior based on the calculated corrosion potential did not match the observed corrosion behavior. Hence, the goal of this study is to get better understanding on Al or Al-Mg alloy coupled to Al-Zn alloy and to provide the calculated corrosion potential representing the corrosion behavior of the ORV material by immersion test, electrochemical tests, and calculation of corrosion and galvanic potential. The corrosion potentials of Al and Al alloys also depended on alloying element as well as surface defects. The corrosion potentials of Al and Al-Mg alloy were changed with time. In the meantime, the corrosion potentials of Al-Zn alloys were not. The corrosion rates of Al-Zn alloys were exponentially increased with zinc contents. The phenomena were explained with the stability of passive film proved by passive current density depending on pH and confirmed by the model proposed by McCafferty. Dissimilar material crevice corrosion (DMCC) test shows that higher content of zinc caused Al-Mg alloy corroded more rapidly, which was due to the fact that higher corrosion rate of Al-Zn makes [$H^+$] and [$Cl^-$] more concentrated within pit solution to corrode Al-Mg alloy. Considering electrochemical reactions within pit as well as bulk in the calculation gives better prediction on the corrosion behavior of Al and Al-Mg alloy as well as the capability of Al-Zn alloy for corrosion protection.

Keywords

References

  1. O. O. Knudsen, T. Rogne, T. Rossland, Corrosion/2004. N04023. Huston. NACE. New Orleans. USA (2004)
  2. H.-K. Lee, M. S. Thesis, p.21-23, Hongik University, Seoul (1997)
  3. Y. Y. Andreev, S. V. Samarichev, M. E. Goncharov, Russian J. of Electrochem., 30 (1994) 1216
  4. V. I. Polkhmurs'ski, M. S. Khoma, V. I. Kopylets, Materials Sci., 39 (2003) 394 https://doi.org/10.1023/B:MASC.0000010745.55466.f7
  5. N. Ganiev, M. Sh. Shukroev, B. B. Eshov, Russian J. of Electrochem., 68 (1995) 910
  6. M. C. Reboul, T. J. Warner, H. Mayet, B. Baroux, Materials Science Forum, 217/222 (1996) 1553
  7. E. MaCafferty, Corrosion Sci., 45 (2003) 1421 https://doi.org/10.1016/S0010-938X(02)00231-7
  8. R. T. Foley, Corrosion, 42 (1986) 277 https://doi.org/10.5006/1.3584905
  9. J. O. M Bockris, L. V. Minevski, J. Electroanal. Chem., 349 (1993) 375 https://doi.org/10.1016/0022-0728(93)80186-L
  10. J.O.M Bockris, Y. Kang, J. Solid State Electrochem, 1 (1997) 17 https://doi.org/10.1007/s100080050019
  11. J. B. Miller, S. L. Bernasek, J. Schwartz, Langmuir, 10 (1994) 2629 https://doi.org/10.1021/la00020a022
  12. I. L. Rosenfeld, I. K. Marshakov, Corrosion, 20 (1964) 115t https://doi.org/10.5006/0010-9312-20.4.115t
  13. 김희산, 한국가스공사 연구과제보고서 (2005)
  14. J. R. Pride, J. R. Scully, J. L. Hudson, J. Electrochem. Soc., 141 (1994) 3028 https://doi.org/10.1149/1.2059275
  15. S. Sato, R. C. Newman, Corrosion, 54 (1998) 955 https://doi.org/10.5006/1.3284817
  16. S. Sato, R. C. Newman, Corrosion, 55 (1999) 3 https://doi.org/10.5006/1.3283964
  17. K. Nisancioglu, O. Saevik, Y. Yu, The 9th Inter. Sym. on the Passivation of Metals and Semiconductors and the Properties of Thin Oxide Layer (ed. Ph. Marcus), PBLC-O-141, CNRS, ENSCP, Paris, France (2005)