초록
본 논문은 입력 주파수대역에 따라 전력증폭기와 주파수 체배기로 동작하는 새로운 이중대역 송신모듈을 제안하고, 그 성능 개선을 위하여 DGS를 이용할 수 있음을 보였다. 일반적인 무선 랜 송신부는 두 주파수 대역에서 동작하기 위하여, 각각의 주파수 대역에서 동작하는 증폭부가 분리되어 구성되어 있으나, 제안한 이중대역 송신모듈은 하나의 송신모듈을 이용하여 입력되는 주파수와 인가하는 바이어스 전압에 따라, IEEE 802.11b/g 신호에 대해서는 증폭기로 동작하고 IEEE 802.11a 신호에 대해서는 주파수 체배기로 동작하여 두 주파수 대역에서 동작 가능하도록 하였다. 또한 출력단의 접지면을 식각하는 DGS를 이용하여, 주파수 체배기로 동작시 입력주파수의 억압뿐만 아니라 증폭기로 동작시 2차고조파를 억압하도록 하였다. 측정결과, 증폭기 모드에서 2차고조파의 억압은 -59dBc.이하이고, 주파수 체배기 모드에서 입력주파수의 억압은 -35dBc이하였다. 그리고 설계된 이중대역 송신모듈은 증폭기모드와 주파수 체배기모드에서 각각 17.8dBm의 출력P1dB와 10.1dBm의 최대 출력전력을 나타냈으며, 이는 ${\lambda}g/4$ 반사기를 사용한 모듈과 비교하여 각각 0.8dB, 2.8dB의 출력 전력이 향상되었다.
This paper has proposed a novel dual band transmitter module which can be operating either as an amplifier or as a frequency multiplier according to the input frequency. A conventional dual band transmitter consists of separate amplifiers operating at each frequency band, but the proposed dual band module operates as an amplifier for the IEEE 802.11b/g signal, and as a frequency doubler for the IEEE 802.11a signal according to input frequency and bias voltage. In this paper, we have obtained sharp stop band characteristics by using microstrip DGS(Defected Ground Structure) to suppress the fundamental frequency of the frequency doubler as well as the second harmonic of the amplifier. From measurement result, second harmonic suppression is below -59dBc in the amplifier mode, and fundamental suppression is below -35dBc in the frequency doubler mode. And the designed module has 17.8dBm output P1dB at 2.4GHz and 10.1dBm power for 5.8GHz output, and the output power in the two modes are 0.8dB and 2.8dB larger than the module with ${\lambda}g/4$ reflector, respectively.