Journal of the Korean Institute of Electrical and Electronic Material Engineers (한국전기전자재료학회논문지)

The Korean Institute of Electrical and Electronic Material Engineers (한국전기전자재료학회)
권호 표지
DOI QR코드

DOI QR Code

Fabrication and Characterization of Red Emitting OLEDs using the Alg3:Rubrene-GDI4234 Phosphor System

Alg3:Rubrene-GDI4234 형광 시스템을 이용한 적색 OLED의 제작과 특성 평가

  • Published : 2006.05.01
Download PDF
⟨ Previous Next ⟩

Abstract

The red emitting OLEDs using $Alq_3$:Rubrene-GDI4234 phosphors have been fabricated and characterized . In the device fabrication, 2- TNATA [4,4',4' - tris (2- naphthylphenyl - phenylamino ) - tripheny lamine] as the hole injection material and NPB [N,N'-bis (1-naphthyl)-N,N'-diphenyl-1,1'-biphenyl-4,4'-diamine] as the hole transport material were deposited on the ITO(indium tin oxide)/glass substrate by vacuum evaporation. And then, red color emissive layer was deposited using $Alq_3$ as the host material and Rubrene(5,6,11,12-tetraphenylnaphthacene)-GDI4234 as the dopants. finally, small molecule OLEDs with structure of ITO/2-TNATA/NPB/$Alq_3$:Rubrene-GDI4234/$Alq_3$/LiF/Al were obtained by in-situ deposition of $Alq_3$, LiF and Al as the electron transport material, electron injection material and cathode, respectively. Red OLEDs fabricated in our experiments showed the color coordinate of CIE(0.65, 0.35) and the maximum power efficiency of 2.1 lm/W at 7 V with the peak emission wavelength of 632 nm.

Keywords

References

  1. 신동찬, 'OLED 소자의 광학특성 향상기술', 정보 디스플레이, 5권, 4호, p. 13, 2005
  2. 키도 준지, '유기 EL', 청문각, p. 34, 2004
  3. C. W. Tang and S. A. VanSlyke, 'Organic electroluminescent diodes', Appl. Phys. Lett., Vol. 51, No. 12, p. 913, 1987
  4. J. H. Burroughs, D. D. C. Bradley, A. R. Brown, R. N. Marks, K. Mackay, R. H. Friend, P. L. Bum, and A. B. Holmes, 'Light-emitting diodes based on conjugated polymers', Nature, Vol. 347, p. 539, 1990 https://doi.org/10.1038/347539a0
  5. M. A. Baldo, S. Lamansky, P. E. Burrows, M. E. Thompson, and S. R. Forrest, 'Very high-efficiency green organic light-emitting devices based on electrophosphorescence', Appl. Phys. Lett., Vol. 75, p. 4, 1999 https://doi.org/10.1063/1.124258
  6. S. C. Gong, I. J. Back, J. H. Yoo, H. S. Lim, H. J. Chang, and G. K. Chang, 'The electrical and optical properties of polymer light emitting diode with ITO/PEDOT:PSS/MEH - PPV/Al structure at various concentration of MEH-PPV', J. of the Micro electronics & Packaging Society, Vol. 12, No. 2, p. 155, 2005
  7. T. P. Nguyen and P. Destruel, 'Electroluminescent devices based on organic materials and conjugated polymers', Handbook of Luminescence, Display Materials, and Devices, Vol. 1-Organic Light Emitting Diodes, p. 90, 2003
  8. T. K. Hatwar, J. P. Spindler, M. L. Ricks, R. H. Young, L. Cosimbescu, W. J. Begley, and S. A. Van Slyke, 'White OLED structures optimized for RGB and RGBW formats', Asia Display/lMID '04 Digest, p, 816, 2004
  9. H. Kanno, Y. Hamada, and H. Takahashi, 'Development of OLED with high stability and luminance efficiency by co-doping methods for full color displays', IEEE J. of Selected Topics in Quantum Electronics, Vol. 10, No. 1, p. 30, 2004 https://doi.org/10.1109/JSTQE.2004.824076
  10. 김우영, '유기EL 소자 제작공정', 한국진공연구조합, 2권, 27호, 2001
  11. 최연수, 류한성, '유기EL 디스플레이의 전망 및 과제', The Magazine of the IEEK, 26권, 2호, p. 28, 1999
  12. 강정원, 김영섭, 오명환, 임성규, 장지근, 장진, 장호정, 허경무, '정보디스플레이공학', 청문각, p. 155, 2005

Cited by

  1. Emission Characteristics of Red OLEDs with Fluorescent and Phosphorescent Dopant vol.22, pp.12, 2009, https://doi.org/10.4313/JKEM.2009.22.12.1039