초록
본 논문은 승압형 컨버터, 강압형 컨버터 및 저주파 인버터를 이용한 고휘도 Short-Arc 램프용 전자식 안정기의 설계 및 제작에 관하여 기술하였다. 제안한 안정기는 130 [Hz]의 구형 저주파를 램프에 인가함으로써 고압 방전 램프에서 발생할 수 있는 음향공명현상을 제거하였으며, 25 [kHz]의 고주파 전압을 중첩시켜 아크튜브의 전극에서 발생할 수 있는 열적 불균형을 해소하였다. 또한 전압 전류의 합을 이용한 정전력 제어를 수행하여, 주위 환경 및 램프의 노화에 따른 램프 전압의 변화에 대하여 안정한 점등상태를 유지하였다. 실험 결과로부터, 제작한 전자식 안정기의 램프 전압, 전류 및 전력은 각각 123.8 [V], 8.1 [A] 1,002 [W]로 측정되었다.
This paper deals with an electronic ballast for hish intensity short-arc discharge lamps, which consists of a boost converter, a step down converter operated as a current source with power regulation and a low frequency inverter with external ignition circuit The ignition circuit generates high voltage pulses of 130[Hz] up to 5 [kV]. A reignition circuit is equipped in the ballast, and it operates the lamp at a regular interval for protection when an ignition fails. Acoustic resonance phenomenon was eliminated by operating a low frequency square wave voltage and current. The measured lamp voltage, current and consumption power were 123.8 [V], 8.1 [A] and 1,002 [W], respectively. From the experiment, we confirmed that the prototype ballast operates the lamp with a constant power.