$L1_2$${\gamma}^{\prime}-Ni_3(Al,Ti)$ 규칙상 중에 불규칙 ${\gamma}$상의 석출거동에 관한 연구

A Study on the Precipitation Behavior of Disordered ${\gamma}$ Phase in an $L1_2$ Ordered ${\gamma}^{\prime}-Ni_3(Al,Ti)$ Phase

  • 한창석 (호서대학교 국방과학기술학과)
  • Han, Chang-Suk (Dept. of Defense Science & Technology, Hoseo University)
  • 투고 : 2006.08.21
  • 심사 : 2006.09.07
  • 발행 : 2006.09.30

초록

Structural studies have been performed on precipitation hardening found in $L1_2$ ordered ${\gamma}^{\prime}-Ni_3(Al,Ti)$ alloys using transmission electron microscopy. A uniform solid solution of ${\gamma}^{\prime}-L1_2$ ordered phase supersaturated with Ni can be obtained by solution annealing in a suitable temperature range. The ${\gamma}^{\prime}$ phase hardens appreciably by the fine precipitation of disordered ${\gamma}$. The shape of ${\gamma}$ precipitates formed during aging is initially spherical or round-cubic and grow into platelets as aging proceeds. High resolution electron microscopy revealed that the ${\gamma}$ precipitates are perfectly coherent with the matrix ${\gamma}^{\prime}$ as long as the ${\gamma}$-precipitates are plates. The loss of coherency initiates by the introduction of dislocations at the ${\gamma}/{\gamma}^{\prime}$ interface followed by the step formation at the dislocations. The ${\gamma}$ precipitates become globular after the loss of coherency. The strength of ${\gamma}^{\prime}-Ni_3(Al,Ti)$ increases over the temperature range of experiment by the precipitation of fine ${\gamma}$ particles. The peak temperature where a maximum strength was obtained shifted to higher temperature.

키워드

참고문헌

  1. J. H. Westbrook and R. L. Fleischer : Intermetallic Compounds, J Wiley & Sons, Chichester, UK, 2 (1995)
  2. J. Cermak, A. Gazda and V. Rothova : Intermetallics, 11 (2003) 939 https://doi.org/10.1016/S0966-9795(03)00118-3
  3. R. G. Davies and T. L. Johnston : Ordered alloys, Ed. by B. H. Kear, C. T. Sims, N. S. Stoloff and J. H. Westbrook, Baton Rouge, La, Claifor's Publishing Division, (1970) 447
  4. P. Beardmore, R. G. Davies and T. L. Johnston : Trans. Met. Soc. AIME, 245 (1969) 1537
  5. S. M. L. Sastry and B. Ramaswami : Acta Met., 23 (1975) 1517 https://doi.org/10.1016/0001-6160(75)90162-5
  6. A. J. Ardell and S. Pattanaik : Phil. Mag. A, 50 (1984) 361 https://doi.org/10.1080/01418618408244233
  7. B. H. Kear, J. E. Doherty, A. F. Giamei and L. P. Lemaire : Proc. 30th Ann. Meeting Electron Microscopy Society of America, Ed. by C. J. Arceneaux, Claifor's Publishing Division, (1972) 588
  8. R. K. Ham, R. H. Cook and G. R. Purdy : Metal Sci. J., 6 (1972) 73 https://doi.org/10.1179/030634572790446064
  9. R. K. Ham, R. H. Cook, G. R. Purdy and G. Willoughby : Metal Sci. J., 6 (1972) 205 https://doi.org/10.1179/030634572790446118
  10. M. F. Ashby and L. M. Brown : Phil. Mag., 8 (1963) 1083 https://doi.org/10.1080/14786436308207338
  11. 屋久四男, 佐野 毅, 美浦康宏, 根本 實 : 日本金屬學會誌, 48 (1984) 1
  12. R. J. Livak and G. Thomas : Acta Met., 22 (1974) 589 https://doi.org/10.1016/0001-6160(74)90156-4
  13. A. E. Staton-Bevan and R. D. Rawlings: Phys. Stat. Sol. (a), 29 (1975) 613 https://doi.org/10.1002/pssa.2210290232
  14. A. E. Staton-Bevan and R. D. Rawlings: J. Mater. Sci., 10 (1975) 505 https://doi.org/10.1007/BF00543696
  15. A. E. Staton-Bevan and R. D. Rawlings: Philos. Mag. A, 32 (1975) 787 https://doi.org/10.1080/14786437508221620
  16. D. Tsipas, H. Lefakis, R. Rawlings, A. E. Staton-Bevan and S. Tsipas : Materials and manufacturing processes, 16 (2001) 127 https://doi.org/10.1081/AMP-100103702
  17. 三浦誠司, 落合鐘一, 大矢義博, 三島良直, 鈴木朝夫 : 日本金屬學會誌, 51 (1987) 400
  18. 落合鐘一, 三浦誠司, 三島良直, 鈴木朝夫 : 日本金屬學會誌, 51 (1987) 608