References
- Choi, B. K. and Jerard, R. B. 'Sculptured Surface Machining - theory and Applications', Kluwer Academic Publishers, 1998
- Balasubramaniam, M., Laxmiprasad, P., Sarma, S. and Shaikh, Z., 'Generating 5-axis Paths Directly from a Tessellated Representation', Computer-Aided Design, Vol. 32, pp. 261-277, 2000 https://doi.org/10.1016/S0010-4485(99)00103-7
- Balasubramaniam, M., Sarma, S. and Marciniak, K., 'Collision-free Finishing Toolpaths from Visibility Data', Computer-Aided Design, Vol. 35, pp. 359- 374, 2003 https://doi.org/10.1016/S0010-4485(02)00057-X
- Ren, Y., Yau, H. T. and Lee, Y. S., 'Clean-up Tool Path Generation by Contraction Tool Method for Machining Complex Polyhedral Models', Comput. Ind., Vol. 54, pp. 17-33, 2004 https://doi.org/10.1016/j.compind.2003.09.003
- Zhu, W. and Lee, Y. S., 'Five-axis Pencil-cut Planning anD Virtual Prototyping with 5-DOF Haptic Interface', Computer-Aided Design, Vol. 36, pp. 1295-1307, 2004 https://doi.org/10.1016/j.cad.2004.01.013
- Park, S. C., 'Triartgular Mesh Intersection', Visual Computer, Vol. 20, No.7, pp. 448-456, 2004
- Park, S. C., 'Sculptured Surface Machining Using Triangular Mesh Slicing', Computer-Aided Design, Vol. 36, No.3, pp. 279-288, 2004 https://doi.org/10.1016/S0010-4485(03)00114-3
- Klass, R. and Kuhn, B., 'Fillet and Surface Intersections Defined by Rolling Balls', Computer Aided Geometric Design, Vol. 9, pp. 185-193, 1992 https://doi.org/10.1016/0167-8396(92)90016-I
- Lee, Y. S., Ma, Y. and Jegadesh, G, 'Rolling-ball Method and Contour Marching Approach to Identifying Critical Regions for Complex Surface Machining', Comput. Ind., Vol. 41, No.2, pp. 163-180, 2000 https://doi.org/10.1016/S0166-3615(99)00042-1
- Xiuzhi, Q. and Brent, S., 'A 3D Surface Offset Method for STL-format Models', Rapid Prototyping Journal, Vol. 9, pp. 133-141, 2003 https://doi.org/10.1108/13552540310477436
- Maekawa, T., 'An Overview of Offset Curves and Surfaces', Computer-Aided Design, Vol. 31, pp. 165-173, 1999 https://doi.org/10.1016/S0010-4485(99)00013-5
- Jun, C. S., Kim, D. S. and Park, S., 'A New Curvebased Approach to Polyhedral Machining', Computer-Aided Design, Vol. 34, No.5, pp. 379-389, 2002 https://doi.org/10.1016/S0010-4485(01)00110-5