Transactions of the Korean Society of Machine Tool Engineers (한국공작기계학회논문집)

The Korean Society of Manufacturing Technology Engineers (한국생산제조학회)
권호 표지

Development Estimation Method to Estimate Sensing Ability of Smart Sensors

지능센서의 센싱능력 평가를 위한 평가기법 개발

  • Published : 2006.04.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, the new method that estimates a sensing ability of smart sensor will be proposed. A study is estimation method that evaluates sensing ability about smart sensor respectively. According to acceleration(g) and displacement changing, we estimated sensing ability of smart sensor using SAI(Sensing Ability Index) method respectively. Smart sensors was made fer experiment. The types of smart sensor are two types(hard and soft smart sensor). Smart sensors developed for recognition of material. Experiment and analysis are executed for estimate the SAI method. In develop a smart sensor, the SAI method will be useful for finding optical design condition of smart sensor that can sense a material. And then dynamic characteristics of smart sensors(frequency changing, acceleration changing, critical point, etc.) are evaluated respectively through new method(SAI) that use the power spectrum density. Dynamic characteristic of sensor is evaluated with SAI method relatively. We can use the SAI for finding critical point of smart sensor, too.

Keywords

References

  1. Thomas, J. R., 1995, 'Technical Note: Shaped polyvinylidene fluoride(PVDF) sensors for intelligent measurement of plant-wave acoustic pressure on liquid-filled pipes,' Noise Control Engineering Journal, Vol. 43, No. 1, pp. 15-20 https://doi.org/10.3397/1.2828360
  2. James, L. C. and Li, S. Y., 1993, 'A New Sensor for Real-Time Milling Tool Condition Monitoring,' Journal of Offshore Mechanics and Arctic Engineering, Vol. 115, No. 2A, pp. 285-290
  3. Tang, B., Mommaerts, J., Duncan, R. K., Duke, J. C. and Dillard, D. A., 1993, 'Nondestructive Evaluation of Modal Adhesive Joints by PVDF Piezoelectric Film Sensors,' Experimental Mechanics Journal, Vol. 33, No. 2, pp. 102-109 https://doi.org/10.1007/BF02322485
  4. Hiroyuki, S. et al, 1994, 'Ultrasonic Emission Tactile Sensor for Contact Location and Characterization,' IEEE, pp. 2536-2543
  5. Chonan, S., Jiang, Z. W., Ibayashi, J. and Sato, M., 1994, 'Development of Soft Tactile Sensor(1st Report, Fundamental Structure and Characteristics of the Sensor),' Transactions of the Japan Society of Mechanical Engineers, Vol. 60, No. 580, pp. 4203-4210 https://doi.org/10.1299/kikaic.60.4203
  6. Hong, D. P. and Hwang, S. Y., et al. 1999, 'Dynamic Characteristics Analysis of Sensor for Enhance Sensing Ability,' Proceeding of the 3rd IWAM, December 1999, pp. 366-371
  7. International Organization for Standardization, 1985, Evaluation of Human exposure to whole-body vibration - part1: General Requirements(ISO 2631/1), International Organization for Standardization
  8. Association of German Engineers, 1987, Effect of Mechanical vibrations on Human beings(VDI 2057), Association of German Engineers
  9. British Standards Institution, 1987, British Standard Guide to Measurement and Evaluation of Human Expose to Whole-body Mechanical Vibration and Repeated Shock(BS 6841), British Standards Institution, 1987
  10. Griffin, M. J., 1990, Handbook of Human Vibration, Academic Press Inc
  11. Lim, Y. H., 1996, 'Finite Element for the Transient Response of Smart Structures,' Mathematics and Control in Smart Structures, Vol. 2715, pp. 233-242
  12. Chonan, S. and Jiang, Z. W., 1994, 'Development of Soft Tactile Sensor(1st Report, Fundamental Structure and Characteristics of the Sensor),' Transactions of the Japan Society of Mechanical Engineers, Vol. 60, No. 580, pp. 4203-4210 https://doi.org/10.1299/kikaic.60.4203