Transactions of the Korean Society of Machine Tool Engineers (한국공작기계학회논문집)

The Korean Society of Manufacturing Technology Engineers (한국생산제조학회)
권호 표지

Experimental Investigation Into the Dynamic Characteristics of Flexible Matrix Composite Driveshafts

유연복합재 구동축의 동특성에 관한 실험 분석

  • 신응수 (충북대학교 기계공학부)
  • Published : 2006.04.01
Download PDF
⟨ Previous Next ⟩

Abstract

This study provides a comprehensive experimental study on the dynamic characteristics of a flexible matrix composite(FMC) driveshaft. A primary objective is to verify the analytic results of the FMC drivetrain based on the equivalent complex modulus approach and the classical lamination theory. A test rig has been constructed, which consists of a FMC shaft, a foundation beam, bearings, external dampers and a driving motor. The frequency response functions and transient responses are obtained from the external excitation and the spin-up testings. It turns out that the analytic results are in good agreement with the experimental ones.

Keywords

References

  1. Heterington, P. L., Kraus, R. F. and Darlow, M. S., 1988, 'Demonstration of a Supercritical Composite Helicopter Power Transmission Shaft,' Proceedings of the American Helicopter Society National Technical Specialist's Meeting on Advanced Rotorcraft Structures, pp. 25-27
  2. Hong, E. and Shin, E. 2004, 'Characterization of a Misaligned Supercritical Shaft of a Flexible Matrix Composite,' Trans. of the Korean Society for Noise and Vibration, Vol. 14, No. 1, pp. 32-39 https://doi.org/10.5050/KSNVN.2004.14.1.032
  3. Mazzei, A., Argento, A. and Scott, R., 1999, 'Dynamic Stability of a Rotating Shaft Driven through a Universal Joints,' J. of Sound and Vibration, Vol. 222, pp. 19-47 https://doi.org/10.1006/jsvi.1998.1986
  4. DeSchmidt, A., Wang, K. and Smith, E., 2002, 'Coupled Torsional-Lateral Stability of a Shaft-Disk System Driven through a Universla Joint,' J. of Applied Mechanics, Vol. 69, No. 3, pp. 261-273 https://doi.org/10.1115/1.1460907
  5. Melanson, J. and Zu, J. W., 1998, 'Free Vibration and Stability Analysis of Internally Damped Rotating Shafts With General Boundary Conditions,' Journal Vibration and Acoustics, Vol. 120, pp. 776-783 https://doi.org/10.1115/1.2893897
  6. Crane, M., Santiago, A. and Radcliffe, C., 1994, 'Structural Damping Characteristics of a Flexible Composite Shaft,' J. of Materials for Noise and Vibration Control, Vol. 80, pp. 65-72
  7. Rikards, R., 1993, 'Finite Element Analysis of Vibration and Damping of Laminated Composites,' Composite Structures, Vol. 24, pp. 193-204 https://doi.org/10.1016/0263-8223(93)90213-A
  8. Gurda, Z, Hafka, R. and Hajel, P., 1999, Design and Optimization of Laminated Composite Materials, John-Wiley & Sons, pp. 73-83
  9. Zorzi, E. and Nelson, H., 1977, 'Finite Element Simulation of Rotor-Bearing Systems with INternal Damping,' ASME J. of Engineering for Power, Vol. 44, No. 1, pp. 71-76
  10. Shen, Y. and Bakis, C., 2002, 'Static and dynamic characterization of a flexible matrix composite material,' Proc. of American HelicopterSociety 58th Forum, Montreal, Canada, pp. 222-227