Transactions of the Korean Society of Machine Tool Engineers (한국공작기계학회논문집)

The Korean Society of Manufacturing Technology Engineers (한국생산제조학회)
권호 표지

A Study on Machined Surfaces Characteristics of Aluminum Alloy by AFM Measurement

AFM 측정법에 의한 알루미늄 합금의 초정밀 가공면 평가 연구

  • 이갑조 (조선대학교 대학원 기계공학과) ;
  • 김종관 (조선대학교 기계공학과)
  • Published : 2006.04.01
Download PDF
⟨ Previous Next ⟩

Abstract

The machining parts must be produced within the specification of drawing and those will be able to meet function and efficiency. At that time, it is very important not only precision machine and machining technique but also the measurement technique. So, the improvement of measurement technique is to be joined together at once with improvement of machining technique. Finally, the quality and value of the parts are decided by precision measurement. This paper aims to study on the machined surfaces characteristics of aluminum alloy by AFM(Atomic force microscope) measurement. The objective is contribution to ultra-precision machining by exhibit foundation data of surface roughness and tool wear when parts are cutting with diamond tool at the factory.

Keywords

References

  1. Ansi, S., Taguchi, Y., Horio, K., Kasai, T. and Kobayashi, A., 1990, 'Measuring the Very Small Cutting- Edge Radius for a Diamond Tool Using a New Kind of SEM Having Two Detectors', Annals of the CIPR, Vol. 39, part1, pp. 85-88
  2. IKawa, N., 1991, 'Ultra-precision Metal Cutting- The Past, the Present and the Future', Annals of the CIRP, Vol. 40, No. 2, pp. 587-594 https://doi.org/10.1016/S0007-8506(07)61134-2
  3. Moronuk, N. and Furukawa, Y., 1988, 'A Study on the Precision Machine with Friction Gearing', JSPE, Vol. 54, No. 11, pp. 2113-2130
  4. Kakino, Y., Ihara, Y., Nakatsu, Y. and Shinohara, A., 1989, 'A Study on the Motion Accuracy of the NC Machine Tool', JSPE, Vol. 55, No. 3, pp. 587-600
  5. Kang, S. J. and Kim, J. K., 2004, 'Characteristics Evaluation of Surface Roughness with Ultra-precision Machining', Trans. of KSMTE, Vol. 13, No. 1, pp. 9-15
  6. Kang, S. J., Oh, S. R., Lee G. J. and Kim, J. K., 2004, 'A Study on the Surface Machining Characteristics of Ultra-precision through SEM Measurement', Proceedings of the KSMTE Spring Conference 2004, pp. 34-41
  7. Jung, J. H., Lee, G. J. and Kim, J. K., 2003, 'An Evaluation of Surface Finish with SEM in Precision Machining, Proceedings of the KSMPE Autumn Conference 2003, pp. 47-52