Smart Structures and Systems

  • 제2권4호
  • /
  • Pages.339-355
  • /
  • 2006
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Retrofit of a hospital through strength reduction and enhanced damping

  • Viti, Stefania (Department of Constructions, University of Florence) ;
  • Cimellaro, Gian Paolo (Department of Civil, Structural & Environmental Engineering, University at Buffalo, The State University of New York) ;
  • Reinhorn, Andrei M. (Department of Civil, Structural & Environmental Engineering, University at Buffalo, The State University of New York)
  • 투고 : 2005.10.20
  • 심사 : 2006.02.09
  • 발행 : 2006.10.25
⟨ 이전 논문 다음 논문 ⟩

초록

A procedure to retrofit existing essential facilities subjected to seismic excitation is proposed. The main features of this procedure are to reduce maximum acceleration and associated forces in buildings subjected to seismic excitation by reducing their strength (weakening). The weakening retrofit, which is an opposite strategy to strengthening, is particularly suitable for buildings having overstressed components and foundation supports or having weak brittle components. However, by weakening the structure large deformations are expected. Supplementaldamping devices however can control the deformations within desirable limits. The structure retrofitted with this strategy will have, therefore, a reduction in the acceleration response and a reduction in the deformations, depending on the amount of additional damping introduced in the structure. An illustration of the above strategy is presented here through an evaluation of the inelastic response of the structure through a nonlinear dynamic analysis. The results are compared with different retrofit techniques. A parametric analysis has also been carried out to evaluate the effectiveness of the retrofitting method using different combination of the performance thresholds in accelerations and displacements through fragility analysis.

키워드

참고문헌

  1. Barron-Corverra, R. (2000), 'Evaluation of seismic fragility in structures', PhD Dissertation, University at Buffalo (SUNY), Buffalo, NY
  2. Shinozuka, M., Tierney, K., Wallace, W. and Winterfelt, D. V. (2003), 'A framework to quantitatively assess and enhance the seismic resilience of communities', EERI Spectra J., 19(4), 733-752 https://doi.org/10.1193/1.1623497
  3. Bruneau, M. and Reinhom, A. M. (2004), 'Seismic resilience of communities - conceptualization and operationalization', Proceedings of International workshop on Performance based seismic-design, Bled - Slovenia, June 28-July 1
  4. Bruneau, M., Uang, C. and Whittaker, A. S. (1998), 'Ductile Design of Steel Structures', McGraw-Hill, New York
  5. Chopra, A. K. (2002), Dynamics of Structures: Theory and Applications to Earthquake Engineering, Prentice Hall, Upper Saddle River, New Jersey
  6. Christopoulos, C. and Filiatrault, A. (2006), Principle of Passive Supplemental Damping and Seismic Isolation, IUSS Press, University of Pavia, Italy
  7. Cimellaro, G. P. (2005), 'Multidimensional fragility of structures - formulation and evaluation', MS Thesis, Department of Civil, Structural & Environmental Engineering, University at Buffalo (SUNY), Buffalo, NY
  8. Cimellaro, G. P., Reinhorn, A. M. and Bruneau, M. (2006), 'Multidimensional fragility of structures: formulation and evaluation', MCEER Technical Report -MCEER-06-0002, Multidisciplinary Center for Earthquake Engineering Research, University at Buffalo (SUNY), Buffalo, NY. (In print)
  9. Deierlein, G. G., Hsieh, S. H., Shen, Y. J. and Abel, J. F. (1991), 'Nonlinear analysis of steel frames with semirigid connections using the capacity spectrum method', Rep. No. NCEER-91-0008, NCEER, University at Buffalo (SUNY), Buffalo, NY
  10. FEMA. (2001), '2001 NEHRP Recommended Provisions for Seismic Regulations for New Buildings and Other Structures', Report No. FEMA 369, Federal Emergency Management Agency, Washington, D.C
  11. Freeman, S. A. (1994), 'The capacity spectrum method for determining the demand displacement', Technical Session: Displacement Considerations in Design of Earthquake-Resisting Buildings, ACI 1994 Spring Convention
  12. Madan, A., Reinhom, A. M., Mander, J. B. and Valles, R. E. (1997), 'Modeling of masonry infill panels for structural analysis', J. Struct. Eng., 123(10), 1295-1302 https://doi.org/10.1061/(ASCE)0733-9445(1997)123:10(1295)
  13. Mander, J. B. and Nai, B. (1994), 'Seismic resistance of brick-infilled steel frames with and without retrofit', The Masonry J., 12(2), 24-37
  14. Park, Y. J. and Ang, A. H. S. (1985), 'Mechanistic seismic damage model for reinforced concrete', J. Struct. Eng., 111(4), 722-739 https://doi.org/10.1061/(ASCE)0733-9445(1985)111:4(722)
  15. Papageorgiou, A. S. and Aki, K. (1983), 'A specific barrier model for the quantitative description of inhomogeneous faulting and the prediction of strong ground motion. I. Description of the model', Bull. Seism. Soc. Am., 73, 693-722
  16. Ramirez, O. M., Constantinou, M. C., Kircher, C. A., Whittaker, A. S., Johnson, M. W., Gomez, J. D. and Christostomou, C. Z. (2000), 'Development and evaluation of simplified procedure for analysis and design of buildings with passive energy dissipation systems', Technical Report MCEER-00-0010., Multidisciplinary Center for Earthquake Engineering Research, University at Buffalo (SUNY), Buffalo, NY
  17. Reinhorn, A. M. (1997), 'Inelastic analysis techniques in seismic evaluations', Proceedings of the International Workshop on Seismic Design Methodologies for the next Generation of Codes, Bled, Slovenia, 24-27 June
  18. Reinhorn, A. M. and et al. (2004), 'IDARC2D version 6.0 - A computer program for the inelastic damage analysis of reinforced concrete buildings', Latest release retrieved from http://civil.eng.buffalo.edu/idarc2d50, (July, 2004)
  19. Reinhorn, A. M., Barron-Corverra, R. and Ayala, A. G. (2001), 'Spectral evaluation of seismic fragility of structures', Proceedings ICOSSAR 2001, Newport Beach CA
  20. Reinhorn, A. M., Kunnath, S. K., Bracci, J. and Mander, J. (1989), 'Normalized damage index for evaluation of buildings', Seismic Engineering: Research and Practice, C.A. Kircher and A.K. Chopra (Eds.), ASCE, New York, 507-516
  21. Reinhorn, A. M., Li, C. and Constantinou, M. C. (1995), 'Experimental and analytical investigation of seismic retrofit of structures with supplemental damping: Part 1 - fluid viscous damping devices', Technical Report NCEER-95-0001, National Center for Earthquake Engineering Research, University at Buffalo (SUNY), Buffalo, NY
  22. Reinhorn, A. M., Viti, S. and Cimellaro, G. P. (2005), 'Retrofit of structures: strength reduction with damping enhancement', Proceedings of the 37th UJNR Panel Meeting on Wind and Seismic Effects, 16-21 May, Tsukuba, Japan
  23. Ribakov, Y. and Reinhorn, A. M. (2003), 'Design of amplified structural damping using optimal considerations', J. Struct. Eng., 129(10), 1422-1427 https://doi.org/10.1061/(ASCE)0733-9445(2003)129:10(1422)
  24. Sivaselvan, M. and Reinhorn, A. M. (2001), 'Hysteretic models for deteriorating inelastic structures', J. Eng. Mech., ASCE, 126(6), 633-640, with discussion by Wang and Foliente and closure in 127(11) https://doi.org/10.1061/(ASCE)0733-9399(2000)126:6(633)
  25. Valles, R. E., Reinhorn, A. M., Kunnath, S. K., Li, C. and Madan, A. (1996), 'IDARC2D version 4.0 -A computer program for the inelastic drainage analysis of buildings', Technical Report NCEER-96-0010, National Center for Earthquake Engineering Research, University at Buffalo (SUNY), Buffalo, NY
  26. Vargas, R. (2006), 'Analytical and experimental investigation of the structural fuse concept', Ph.D. Dissertation, State University of New York (SUNY), Buffalo, NY
  27. Wanitkorkul, A. and Filiatrault, A. (2005), 'Simulation of strong ground motions for seismic fragility evaluation of nonstructural components in hospitals', Technical Report MCEER-05-0005, pp. 192, Multidisciplinary Center for Earthquake Engineering Research, University at Buffalo (SUNY), Buffalo, NY
  28. Watanabe, A., Hitomi, Y., Yaeki, E., Wada, A. and Fujimoto, M. (1998), 'Properties of brace encased in buckling-restraining concrete and steel tube', Proceedings of the 9th World Conference on Earthquake Engineering, Tokyo-Kyoto, Japan, IV, 719-724

피인용 문헌

  1. Noniterative Optimization Procedure for Seismic Weakening and Damping of Inelastic Structures vol.134, pp.10, 2008, https://doi.org/10.1061/(ASCE)0733-9445(2008)134:10(1638)
  2. Negative Stiffness Device for Seismic Protection of Structures vol.139, pp.7, 2013, https://doi.org/10.1061/(ASCE)ST.1943-541X.0000616
  3. Development and Testing of Naturally Buckling Steel Braces vol.142, pp.1, 2016, https://doi.org/10.1061/(ASCE)ST.1943-541X.0001319
  4. Design of viscous fluid passive structural control systems using pole assignment algorithm vol.21, pp.7, 2014, https://doi.org/10.1002/stc.1633
  5. Choice between series and parallel connections of hysteretic system and viscous damper for seismic protection of structures vol.47, pp.1, 2018, https://doi.org/10.1002/eqe.2938
  6. Dimensional Analysis of Inelastic Structures with Negative Stiffness and Supplemental Damping Devices vol.143, pp.3, 2017, https://doi.org/10.1061/(ASCE)ST.1943-541X.0001658
  7. Modeling and seismic response of structures with concrete rocking columns and viscous dampers vol.32, pp.8, 2010, https://doi.org/10.1016/j.engstruct.2010.03.013
  8. A methodology for the integrated seismic design of nonlinear buildings with supplemental damping vol.22, pp.3, 2015, https://doi.org/10.1002/stc.1688
  9. Equivalent bilinear elastic single degree of freedom system of multi-degree of freedom structure with negative stiffness vol.365, 2016, https://doi.org/10.1016/j.jsv.2015.11.005
  10. Simultaneous stiffness–damping optimization of structures with respect to acceleration, displacement and base shear vol.29, pp.11, 2007, https://doi.org/10.1016/j.engstruct.2007.01.001
  11. Framework for analytical quantification of disaster resilience vol.32, pp.11, 2010, https://doi.org/10.1016/j.engstruct.2010.08.008
  12. Apparent Weakening in SDOF Yielding Structures Using a Negative Stiffness Device: Experimental and Analytical Study vol.141, pp.4, 2015, https://doi.org/10.1061/(ASCE)ST.1943-541X.0001077
  13. Optimal weakening and damping using polynomial control for seismically excited nonlinear structures vol.8, pp.4, 2009, https://doi.org/10.1007/s11803-009-9124-2
  14. Implementable Bio-Inspired Passive Negative Spring Actuator for Full-Scale Structural Control under Seismic Excitation vol.142, pp.1, 2016, https://doi.org/10.1061/(ASCE)ST.1943-541X.0001323
  15. Seismic structural and non-structural performance evaluation of highly damped self-centering and conventional systems vol.33, pp.8, 2011, https://doi.org/10.1016/j.engstruct.2011.04.001
  16. Spectral and fragility evaluations of retrofitted structures through strength reduction and enhanced damping vol.8, pp.1, 2009, https://doi.org/10.1007/s11803-009-8144-2
  17. Nonlinear elastic and inelastic spectra with inherent and supplemental damping 2013, https://doi.org/10.1002/eqe.2318
  18. Seismic retrofit of frame structures using passive systems based on optimal control vol.25, pp.1, 2018, https://doi.org/10.1002/stc.2038
  19. Analytical modeling of rocking elements vol.31, pp.5, 2009, https://doi.org/10.1016/j.engstruct.2009.01.014
  20. Seismic Fragility Evaluation of RC Frame Structures Retrofitted with Controlled Concrete Rocking Column and Damping Technique vol.15, pp.7, 2011, https://doi.org/10.1080/13632469.2010.551704
  21. Optimal softening and damping design for buildings vol.14, pp.6, 2007, https://doi.org/10.1002/stc.181
  22. Soil-Structure Interaction for Integrated Design of Weakened and Damped Structures vol.11, pp.04, 2017, https://doi.org/10.1142/S1793431117500130
  23. Adaptive Negative Stiffness: New Structural Modification Approach for Seismic Protection vol.139, pp.7, 2013, https://doi.org/10.1061/(ASCE)ST.1943-541X.0000615
  24. Negative stiffness device for seismic protection of smart base isolated benchmark building vol.24, pp.11, 2017, https://doi.org/10.1002/stc.1968
  25. Introspection on improper seismic retrofit of Basilica Santa Maria di Collemaggio after 2009 Italian earthquake vol.10, pp.1, 2011, https://doi.org/10.1007/s11803-011-0054-4
  26. A preliminary case study of resilience and performance of rehabilitated buildings subjected to earthquakes vol.11, pp.6, 2016, https://doi.org/10.12989/eas.2016.11.6.967
  27. Optimum Value of Negative Stiffness and Additional Damping in Civil Structures vol.143, pp.8, 2017, https://doi.org/10.1061/(ASCE)ST.1943-541X.0001805
  28. Negative Stiffness Device for Seismic Protection of Structures: Shake Table Testing of a Seismically Isolated Structure vol.142, pp.5, 2016, https://doi.org/10.1061/(ASCE)ST.1943-541X.0001455
  29. Collapse fragility assessment of steel roof framings with force limiting devices under transient wind loading 2012, https://doi.org/10.1007/s11709-012-0168-4
  30. Design of passive systems for control of inelastic structures vol.38, pp.6, 2009, https://doi.org/10.1002/eqe.867
  31. Nature of seismic control force in acceleration feedback vol.20, pp.5, 2013, https://doi.org/10.1002/stc.1496
  32. Multidimensional Performance Limit State for Hazard Fragility Functions vol.137, pp.1, 2011, https://doi.org/10.1061/(ASCE)EM.1943-7889.0000201
  33. Seismic resilience of a hospital system vol.6, pp.1-2, 2010, https://doi.org/10.1080/15732470802663847
  34. Simulated Bilinear-Elastic Behavior in a SDOF Elastic Structure Using Negative Stiffness Device: Experimental and Analytical Study vol.140, pp.2, 2014, https://doi.org/10.1061/(ASCE)ST.1943-541X.0000830
  35. Nonlinear Static Analysis of Structures with Rocking Columns vol.136, pp.5, 2010, https://doi.org/10.1061/(ASCE)ST.1943-541X.0000154
  36. Adaptive Negative Stiffness: A New Structural Modification Approach for Seismic Protection vol.639-640, pp.1662-8985, 2013, https://doi.org/10.4028/www.scientific.net/AMR.639-640.54
  37. Bracing Systems for Seismic and Wind Performance of Tall Buildings vol.650, pp.1662-8985, 2013, https://doi.org/10.4028/www.scientific.net/AMR.650.667
  38. Three-Dimensional Base Isolation Using Vertical Negative Stiffness Devices pp.1559-808X, 2018, https://doi.org/10.1080/13632469.2018.1493004
  39. Seismic protection of smart base-isolated structures using negative stiffness device and regulated damping vol.21, pp.3, 2006, https://doi.org/10.12989/sss.2018.21.3.359
  40. Strong geometric softening–hardening nonlinearities in an oscillator composed of linear stiffness and damping elements vol.107, pp.None, 2006, https://doi.org/10.1016/j.ijnonlinmec.2018.09.004
  41. Effect of retrofitting on the structural factors for seismic assessment of unreinforced masonry structures: a review vol.20, pp.1, 2006, https://doi.org/10.1080/13287982.2019.1565288
  42. Optimal Design and Distribution of Viscous Dampers for Shear Building Structures Under Seismic Excitations vol.5, pp.None, 2006, https://doi.org/10.3389/fbuil.2019.00090
  43. Metallic Slit-Plate Dampers: Damage Evaluation with Metal Magnetic Memory Technique and Application to Structures with Rocking Columns vol.9, pp.9, 2006, https://doi.org/10.3390/met9090953
  44. Review of Resilience-Based Design vol.9, pp.2, 2020, https://doi.org/10.12989/csm.2020.9.2.091
  45. Negative stiffness devices for vibration isolation applications: A review vol.23, pp.8, 2006, https://doi.org/10.1177/1369433219900311
  46. Reinforced-Concrete Shear Walls Retrofitted Using Weakening and Self-Centering: Numerical Modeling vol.146, pp.7, 2020, https://doi.org/10.1061/(asce)st.1943-541x.0002669
  47. Apparent-weakening by adaptive passive stiffness shaping along the height of multistory building using negative stiffness devices and dampers for seismic protection vol.220, pp.None, 2006, https://doi.org/10.1016/j.engstruct.2020.110754
  48. The strong column-weak beam design philosophy in reinforced concrete frame structures: A literature review vol.23, pp.16, 2006, https://doi.org/10.1177/1369433220933463
  49. Optimization‐based seismic design of steel moment‐resisting frames with nonlinear viscous dampers vol.28, pp.1, 2021, https://doi.org/10.1002/stc.2655
  50. Seismic Performance Assessment of a Multistorey Building Designed with an Alternative Capacity Design Approach vol.2021, pp.None, 2006, https://doi.org/10.1155/2021/5178065
  51. Performance‐based seismic retrofitting of frame structures using negative stiffness devices and fluid viscous dampers via optimization vol.50, pp.12, 2021, https://doi.org/10.1002/eqe.3502
  52. A novel structural seismic protection system with negative stiffness and controllable damping vol.28, pp.10, 2006, https://doi.org/10.1002/stc.2810