Computers and Concrete

  • 제3권6호
  • /
  • Pages.389-400
  • /
  • 2006
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Investigations on the tensile strength of high-performance fiber reinforced concrete using statistical methods

  • Ramadoss, P. (Structural Engineering Division, Department of Civil Engineering, Anna University) ;
  • Nagamani, K. (Structural Engineering Division, Department of Civil Engineering, Anna University)
  • 투고 : 2006.07.15
  • 심사 : 2006.10.13
  • 발행 : 2006.12.25
⟨ 이전 논문 다음 논문 ⟩

초록

This paper presents the investigations towards developing a better understanding on the contribution of steel fibers on the tensile strength of high-performance fiber reinforced concrete (HPFRC). An extensive experimentation was carried out with w/cm ratios ranging from 0.25 to 0.40 and fiber content ranging from zero to 1.5 percent with an aspect ratio of 80. For 32 concrete mixes, flexural and splitting tensile strengths were determined at 28 days. The influence of fiber content in terms of fiber reinforcing index on the flexural and splitting tensile strengths of HPFRC is presented. Based on the test results, mathematical models were developed using statistical methods to predict 28-day flexural and splitting tensile strengths of HPFRC for a wide range of w/cm ratios. The expressions, being developed with strength ratios and not with absolute values of strengths and are applicable to wide range of w/cm ratio and different sizes/shapes of specimens. Relationship between flexural and splitting tensile strengths has been developed using regression analysis and absolute variation of strength values obtained was within 3.85 percent. To examine the validity of the proposed model, the experimental results of previous researchers were compared with the values predicted by the model.

키워드

참고문헌

  1. ACI Committee 544 (1993), 'Guide for specifying, mixing, placing and finishing steel fiber reinforced concrete', ACI Mater. J., 90(1), 94-101
  2. ACI 211.4R-93 (1999-Partl), Guide for selecting proportions for High strength concrete with Portland cement and Fly ash, ACI Manual of concrete practice
  3. ACI 234R-96 (1999-Partl), Guide for Use of Silica Fumes in Concrete, ACI Manual of concrete practice
  4. ACI Committee 363 (1984), 'State-of-the-art report on high strength concrete', ACI 363R-84, American Concrete Institute, 48 pp
  5. ACI Committee 544 (1982), 'State-of-the-art report on fiber reinforced concrete', ACI 544-1R-82, Concrete International, 4(5), 9-27
  6. ACI Committee 544 (1988), 'Measurement of properties of fiber reinforced concrete', ACI Mater J., 85(6), 583-589
  7. ASTM C496-1990, Standard test method for split tensile strength of cylindrical concrete specimens, Annual book of ASTM standards, American Society for Testing and Materials, USA
  8. ASTM C78-1994, Standard test method for flexural strength of fiber reinforced concrete, Annual book of ASTM standards, American Society for Testing and Materials, USA
  9. Aftcin, P. C. (1998), High Performance Concrete, 1st edition, E& FN, SPON, London
  10. Balaguru, N., and Shah, S. P. (1992), Fiber Reinforced Concrete Composites, McGraw Hill international edition, New York
  11. Bhanja, S. and Sengupta, B. (2002), 'Investigation on the compressive strength of silica fume concrete using statistical methods', Cement Concrete Res., 32(9), 1391-1394 https://doi.org/10.1016/S0008-8846(02)00787-1
  12. Bhattacharya, G.K. and Johnson, R.A. (1977), Statistical Concepts and Methods, Wiley, New York
  13. Cook, R. D. and Weishberk, S. (1982), Residuals and Influence in Regression, Chapman& Hall, London
  14. Ezeldin, A. S. and Balaguru, P. N. (1992), 'Normal and high strength fiber reinforced concrete under compression', J. Mater. Civ. Eng., ASCE, 4(4), 415-429 https://doi.org/10.1061/(ASCE)0899-1561(1992)4:4(415)
  15. Fanella, D. A. and Naarnan, A. E. (1985), 'Stress-strain properties of fiber reinforced mortar in compression', ACI J., 82(4), 475-583
  16. IS: 10262-1992, Recommended guidelines for concrete mix design, Bureau of Indian Standards, New Delhi, India
  17. IS: 12269-1987, Specification for 53 grade ordinary Portland cement, Bureau of Indian Standards, New Delhi, India
  18. IS: 516-1959, Indian standard methods of tests for strength of concrete, BIS 2002 Bureau of Indian Standards, New Delhi, India
  19. Mansur, M. A., Chin, M. S., and Wee, T. H. (1999), 'Stress-strain relationship of high strength concrete in compression', J. Mater. Civ. Eng., ASCE, 11(1), 21-29 https://doi.org/10.1061/(ASCE)0899-1561(1999)11:1(21)
  20. Moharnmadi, Y. and Kaushik, S. K. (2003), 'Investigation of mechanical properties of steel fiber reinforced concrete with mixed aspect ratio of fibers', J. Ferro Cement, 33(1), 1-14
  21. Nataraja, M. C., Dhang, N. and Gupta, A. P. (2001), 'Splitting tensile strength of steel fiber reinforced concrete', Indian Concrete J., 75(4), 287-290
  22. Nataraja, M. C., Dhang, N., and Gupta, A. P. (1999), 'Stress-strain cure for steel fiber reinforced concrete in compression', Cement Concrete Compo., 21(5/6), 383-390 https://doi.org/10.1016/S0958-9465(99)00021-9
  23. Nawy, E. G. (1997), Concrete Construction Engineering Hand Book, CRC Press, Boca Raton, New York
  24. RILEM TC 162-TDF (2002), 'Test and design methods for steel fiber reinforced concrete: bending test', Mater. Struct., 33(1), 579-582
  25. Spiegel, M. R. and Stephens, L. J. (2000), Theory and Problems of Statistics (3rd edition), Tata McGraw-Hill publishing Co. Ltd., New Delhi
  26. Wafa, F. F. and Ashour, S. A. (1992), 'Mechanical properties of high-strength fiber reinforced concrete', ACI Mater. J., 89(5), 445-455

피인용 문헌

  1. Correlations among mechanical properties of steel fiber reinforced concrete vol.23, pp.12, 2009, https://doi.org/10.1016/j.conbuildmat.2009.08.017
  2. Progressive Micromechanical Modeling for Pullout Energy of Hooked-end Steel Fiber in Cement-based Composites vol.20, pp.6, 2011, https://doi.org/10.1177/1056789510385260
  3. Experimental investigation on mechanical properties of Hybrid Fibre Reinforced Concrete vol.157, 2017, https://doi.org/10.1016/j.conbuildmat.2017.09.098
  4. Micromechanical Modeling of Fracture Energy for Hooked-End Steel Fiber-Reinforced Cementitious Composites vol.21, pp.3, 2012, https://doi.org/10.1177/1056789510397072
  5. Correlation of Compressive Strength and Other Engineering Properties of High-Performance Steel Fiber–Reinforced Concrete vol.27, pp.1, 2015, https://doi.org/10.1061/(ASCE)MT.1943-5533.0001050
  6. Recent trends in steel fibered high-strength concrete vol.32, pp.8-9, 2011, https://doi.org/10.1016/j.matdes.2011.03.030
  7. Behavior of high-strength fiber reinforced concrete plates under in-plane and transverse loads vol.31, pp.4, 2009, https://doi.org/10.12989/sem.2009.31.4.371
  8. Statistical methods of investigation on the compressive strength of high-performance steel fiber reinforced concrete vol.9, pp.2, 2006, https://doi.org/10.12989/cac.2012.9.2.153
  9. Modeling of fiber pullout behaviors of stiff fiber reinforced cementitious composites vol.9, pp.3, 2006, https://doi.org/10.12989/cac.2012.9.3.171
  10. Shear and impact strength of waste plastic fibre reinforced concrete vol.5, pp.2, 2006, https://doi.org/10.12989/acc.2017.5.2.173
  11. Effect of ground granulated blast furnace slag on time-dependent tensile strength of concrete vol.23, pp.2, 2006, https://doi.org/10.12989/cac.2019.23.2.133
  12. Formula to identify the Influence of steel fibres on the mechanical properties of HPC vol.25, pp.5, 2006, https://doi.org/10.12989/cac.2020.25.5.479
  13. Experimental study on the mechanical properties and the microstructure of hybrid‐fiber‐reinforced concrete under an early stage vol.21, pp.3, 2006, https://doi.org/10.1002/suco.201900262
  14. Experimental Study on the Fracture Parameters of Concrete vol.14, pp.1, 2021, https://doi.org/10.3390/ma14010129
  15. Effects of Coarse Aggregate Maximum Size on Synthetic/Steel Fiber Reinforced Concrete Performance with Different Fiber Parameters vol.11, pp.4, 2006, https://doi.org/10.3390/buildings11040158
  16. Mechanical and durability properties of steel fiber‐reinforced concrete containing coarse recycled concrete aggregate vol.22, pp.5, 2006, https://doi.org/10.1002/suco.202100028