참고문헌
- Abe, K. and Ohya, Y. (2004), 'An investigation of flow fields around flanged diffusers using CFD', J .Wind Eng. Ind. Aerodyn., 92, 315-330 https://doi.org/10.1016/j.jweia.2003.12.003
- Abe, K., Nishida, M., Sakurai, A., Ohya, Y., Kihara, H., Wada, E., and Sato, K. (2005), 'Experimental and numerical investigations of flow fields behind a small wind turbine with a flanged diffuser', J. Wind Eng. Ind. Aerodyn., 93, 951-970 https://doi.org/10.1016/j.jweia.2005.09.003
- Gilbert, B. L. and Foreman, K. M. (1983), 'Experiments with a diffuser-augmented model wind turbine', Trans. ASME, J. Energy Res. Tech., 105, 46-53 https://doi.org/10.1115/1.3230875
- Igra, O. (1981), 'Research and development for shrouded wind turbines', Energy Conversion and Management, 21, 13-48
- Inoue, M., Sakurai, A., and Ohya, Y. (2002), 'A simple theory of wind turbine with a brimmed diffuser', Turbomachinery, 30-8, 497-502
- Jeong, J. and Hussain F. (1995), 'On the definition of a vortex', J. Fluid Mech., 285, 69-94 https://doi.org/10.1017/S0022112095000462
- Nagai, M. and Irabu, K. (1987), 'Momentum theory for diffuser augmented wind turbine', Trans. JSME, 53-489, 1543-1547
- Ohya, Y., Karasudani, T., Sakurai, A., and Inoue, M. (2006), 'Development of a high-performance wind turbine equipped with a brimmed diffuser shroud', Transactions of the Japan Society for Aeronautical and Space Sciences, 49/163, 18-24
- Phillips, D. G., Richards, P. J., and Flay, R. G. J. (2000), 'CFD modelling and the development of the diffuser augmented wind turbine', In Comp. Wind Eng., 2000, Birmingham, 189-192
- Ushiyama, I. (1997), Introduction of Wind Turbine, Sanseido Press, Tokyo, pp. 77-84
- Vermeer, L. J., Sorensen, J. N., and Crespo, J. (2003), 'Wind turbine wake aerodynamics', Progress in Aerospace Sciences, 39, 467-510 https://doi.org/10.1016/S0376-0421(03)00078-2
피인용 문헌
- Bluff body flow and vortex—its application to wind turbines vol.46, pp.6, 2014, https://doi.org/10.1088/0169-5983/46/6/061423
- A Shrouded Wind Turbine Generating High Output Power with Wind-lens Technology vol.3, pp.12, 2010, https://doi.org/10.3390/en3040634
- Behavior of the Blade Tip Vortices of a Wind Turbine Equipped with a Brimmed-Diffuser Shroud vol.5, pp.12, 2012, https://doi.org/10.3390/en5125229
- Determining the performance of a Diffuser Augmented Wind Turbine using a combined CFD/BEM method vol.2, 2017, https://doi.org/10.1051/rees/2017032
- Development of a shrouded wind turbine with a flanged diffuser vol.96, pp.5, 2008, https://doi.org/10.1016/j.jweia.2008.01.006
- Determining Diffuser Augmented Wind Turbine performance using a combined CFD/BEM method vol.753, 2016, https://doi.org/10.1088/1742-6596/753/8/082033
- Wind lens technology and its application to wind and water turbine and beyond vol.2, 2017, https://doi.org/10.1051/rees/2016022
- Numerical Prediction and Field Verification Test of Wind-Power Generation Potential in Nearshore Area Using a Moored Floating Platform vol.05, pp.02, 2017, https://doi.org/10.4236/jfcmv.2017.52002
- Experimental investigation into the influence of the flanged diffuser on the dynamic behavior of CFRP blade of a shrouded wind turbine vol.78, 2015, https://doi.org/10.1016/j.renene.2015.01.028
- A Simple Theory and Performance Prediction for a Shrouded Wind Turbine with a Brimmed Diffuser vol.14, pp.12, 2006, https://doi.org/10.3390/en14123661