DOI QR코드

DOI QR Code

Response characteristics and suppression of torsional vibration of rectangular prisms with various width-to-depth ratios

  • Takai, Kazunori (Department of Mechanical Engineering, Kitami Institute of Technology) ;
  • Sakamoto, Hiroshi (Department of Mechanical Engineering, Kitami Institute of Technology)
  • 투고 : 2005.01.14
  • 심사 : 2005.11.08
  • 발행 : 2006.02.25

초록

The response characteristics and suppression of flow-induced vibrations of rectangular prisms with various width-to-depth ratios were experimentally investigated. The prisms were rigid and elastically mounted at both ends to enable constrained torsional vibrations only. The present study focused on torsional vibrations, one of the three types of flow-induced vibrations generated in a rectangular prism. First, the response characteristics of torsional vibrations generated in rectangular prisms were investigated by free-vibration tests. It was found that the response characteristics of torsional vibrations generated in rectangular prisms could be classified into six patterns depending on the width-to-depth ratio. Next, the response characteristics of torsional vibrations observed in the free-vibration tests were reproduced by forced-vibration tests, and the mechanisms by which the three types of flow-induced vibrations, low-speed torsional flutter, vortex excitation and high-speed torsional flutter, are generated in the rectangular prisms were elucidated on the basis of characteristics of fluid forces and visualized flow patterns. Experiments were also carried out to establish an effective method for suppressing flow-induced vibrations generated in the rectangular prisms, and it was found that low-speed torsional flutter and high-speed torsional flutter could be suppressed by placing a small normal plate upstream of the prism, which results in suppression of the alternating rolling-up of the shear layers separating from the leading edges of the prism. It was also found that vortex excitation could be suppressed by placing a splitter plate downstream of the prism, which results in suppression of the generation of wake vortices.

키워드

참고문헌

  1. Bearman, P.W. (1965), 'Investigation of the flow behind a two-dimensional model with a blunt trailing edge and fitted with splitter plate', J. Fluid Mech., 21-2, 241-255 https://doi.org/10.1017/S0022112065000010
  2. Deniz, S. and Staubli, T. (1997), 'Oscillating rectangular and octagonal profiles: Interaction of leading- and trailing-edge vortex formation', J. Fluids Struct., 11, 3-31 https://doi.org/10.1006/jfls.1996.0064
  3. Gursul, I. and Rockwell, D. (1990), 'Vortex street impinging upon an elliptical leading edge', J. Fluid Mech., 211, 211-242 https://doi.org/10.1017/S0022112090001471
  4. Itoh, Y. and Tamura, T. (2002), 'The role of separated shear layers in unstable oscillations of a rectangular cylinder around a resonant velocity', J. Wind Eng. Ind. Aerodyn., 90, 377-394 https://doi.org/10.1016/S0167-6105(01)00208-2
  5. Komatsu, S. and Kobayashi, H. (1980), 'Vortex-induced oscillation of bluff cylinders', J. Wind Eng. Ind. Aerodyn., 6, 335-362 https://doi.org/10.1016/0167-6105(80)90010-0
  6. Leonard, A. and Roshko, A. (2001), 'Aspects of flow-induced vibration', J. Fluids Struct., 15, 415-425 https://doi.org/10.1006/jfls.2000.0341
  7. Matsumoto, M., Kobayashi, K. and Shirato, H. (1996), 'The influence of aerodynamic derivatives on flutter', J. Wind Ind. Eng. Aerodyn., 60, 227-239 https://doi.org/10.1016/0167-6105(96)00036-0
  8. Matsumoto, M., Daito, Y., Yoshizumi, F., Ichikawa, Y. and Yabutani, T. (1997), 'Torsional flutter of bluff bodies', J. Wind Ind. Eng. Aerodyn., 69-71, 871-882
  9. Matsumoto, M. (1999), 'Vortex shedding of bluff bodies: A review', J. Fluids Struct., 13, 791-81l https://doi.org/10.1006/jfls.1998.0194
  10. Mills, R., Sheridan, J. and Hourigan, K. (2003), 'Particle image velocimetry and visualization of natural and forced flow around rectangular cylinders', J. Fluid Mech., 478, 299-323
  11. Munshi, S.R., Modi, V.J. and Yokomizo, Y. (1997), 'Aerodynamics and dynamics of rectangular prisms with momentum injection', J. Fluids Struct., 11, 873-892 https://doi.org/10.1006/jfls.1996.0064
  12. Nakaguchi, Y., Hashimoto, T. and Muto, S. (1968), 'An experimental study on aerodynamic drag of rectangular cylinders', J. Japan Society for Aeronautical and Space Sciences, 16-168, 1-5 (in Japanese) https://doi.org/10.2322/jjsass1953.16.1
  13. Nakamura, Y. and Nakashima, M. (1986), 'Vortex excitation of prisms with elongated rectangular, H and crosssections', J. Fluid Mech., 163, 149-169 https://doi.org/10.1017/S0022112086002252
  14. Nakamura, Y. and Matsukawa, T. (1987), 'Vortex excitation of rectangular cylinders with a long side normal to the flow', J. Fluid Mech., 180, 171-191 https://doi.org/10.1017/S0022112087001708
  15. Nakamura, Y. and Hirata, K. (1994), 'The aerodynamic mechanism of galloping', Transactions of Japan Society for Aeronautical and Space Sciences, 36-114, 257-269
  16. Naudascher, E., Weske, J.R. and Fey, B. (1981), 'Exploratory study on damping of galloping vibrations', J. Wind Eng. Ind. Aerodyn., 8, 211-222 https://doi.org/10.1016/0167-6105(81)90002-7
  17. Okajima, A., Sugitani, K and Mizota, T. (1980), 'Strouhal number and base pressure coefficient of rectangular cylinders (The case of a section of a width/height ratio of 1-9)', Transactions of the Japan Society of Mechanical Engineers, B 49-447, 2551-2558 (in Japanese)
  18. Otsuki, Y., Washizu, K., Tomizawa, H. and Ohya, A. (1974), 'A note on the aeroelastic instability of a prismatic bar with square section', J. Sound and. Vib., 34-2, 233-248
  19. Sakamoto, H., Haniu, H. and Kobayashi, K. (1989), 'Fluctuating forces acting on rectangular cylinders in uniform flow (On rectangular cylinders with fully separated flow)', Transactions of the Japan Society of Mechanical Engineers, B 55-516, 2310-2317 (in Japanese) https://doi.org/10.1299/kikaib.55.2310
  20. Sakamoto, H., Takai, K., Alam, M.M. and Moriya, M. (2002), 'Generation mechanism and characteristics of flow-induced vibrations of rectangular prism with various width-to-height ratios', Proc. ofthe 5th International Conference on Hydrodynamics, Tainan, 293-298
  21. Shiraishi, Y. and Matsumoto, M. (1983), 'On classification of vortex-induced oscillation and its application for bridge structures', J. Wind Eng. Ind. Aerodyn., 14, 419-430 https://doi.org/10.1016/0167-6105(83)90043-0
  22. Takai, K., Sakamoto, H., Alam, M.M. and Moriya, M. (2000), 'Suppression and generation mechanism of flowinduced vibrations of a rectangular prism with impinging leading-edge vortices', Proc. of the 4th International Conference on Hydrodynamics, 1, Yokohama, 471-476
  23. Takeuchi, T. and Matsumoto, M. (1992), 'Aerodynamic response characteristics of rectangular cylinders in tandem arrangement', J. Wind Ind. Eng. Aerodyn., 41-44, 565-575
  24. Tamura, T. and Dias, P.P.N.L. (2003), 'Unstable aerodynamic phenomena around the resonant velocity of a rectangular cylinder with small side ratio', J. Wind Eng. Ind. Aerodyn., 91, 127-138 https://doi.org/10.1016/S0167-6105(02)00331-8
  25. Tang, Y.P. and Rockwell, D. (1983), 'Instantaneous pressure fields at a corner associated with vortex impingement', J. Fluid Mech., 126, 187-204 https://doi.org/10.1017/S0022112083000105
  26. Washizu, K., Ohya, A., Otsuki, Y. and Fuji, K. (1976), 'Wind tunnel experiments on the aeroelastic instability of prismatic models with rectangular sections', Proceedings of the Fourth Symposium on Wind Effects on Structures in Japan, 191-198

피인용 문헌

  1. Response characteristics of wake galloping of two square prisms to their relative position and flow velocity vol.80, pp.813, 2014, https://doi.org/10.1299/transjsme.2014fe0116
  2. Flow measurements regarding the timing of vortices during flutter vol.98, pp.12, 2010, https://doi.org/10.1016/j.jweia.2010.08.005
  3. Characteristics and suppression of flow-induced vibrations of two side-by-side circular cylinders vol.54, 2015, https://doi.org/10.1016/j.jfluidstructs.2015.01.004
  4. A study on aeroelastic forces due to vortex-shedding by reduced frequency response function vol.12, pp.1, 2009, https://doi.org/10.12989/was.2009.12.1.063