Structural Engineering and Mechanics

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Experimental behaviour of extended end-plate composite beam-to-column joints subjected to reversal of loading

  • Hu, Xiamin (College of Civil Engineering, Nanjing University of Technology) ;
  • Zheng, Desheng (College of Civil Engineering, Nanjing University of Technology) ;
  • Yang, Li (College of Civil Engineering, Nanjing University of Technology)
  • Received : 2005.05.16
  • Accepted : 2006.04.05
  • Published : 2006.10.20
⟨ Previous Next ⟩

Abstract

This paper is concerned with the behaviour of steel and concrete composite joints subjected to reversal of loading. Three cruciform composite joint specimens and one bare steel joint specimen were tested so that one side of the beam-to-column connection was under negative moment and another side under positive moment. The steelwork beam-to-column connections were made of bolted end plate with an extended haunch section. Composite slabs employing metal decking were used for all the composite joint specimens. The moment-rotation relationships for the joints were obtained experimentally. Details of the experimental observations and results were reported.

Keywords

References

  1. Altmann, R., Maquoi, R. and Jaspart, J.P. (1991), 'Experimental study of the nonlinear behaviour of beam to column connections', J. Const. Steel Res., 18(1), 45-54 https://doi.org/10.1016/0143-974X(91)90052-3
  2. Davison, J.B., Lam, D. and Nethercot, D.A. (1990), 'Semi-rigid action of composite joints', Struct. Eng., 68(24), 18-22
  3. Hu, Xiamin, Guo, Yiqing, and Liu, Jianpin (2002), 'Calculation of moment resistance of semi-rigid steelconcrete composite joints', J. Nanjing Univ. Tech., 24, 25-2
  4. Hu, Xiamin, Guo, Yiqing, and Liu, Jianpin (2004), 'Initial roataion stiffuess calculation of semi-rigid composite joints', Industral Construction, 34, 71-73
  5. Lee, S.J. and Lu, L.W. (1989), 'Cyclic tests of full-scale composite joints subassemblages', J. Struct. Eng., 115(8), 1977-1998 https://doi.org/10.1061/(ASCE)0733-9445(1989)115:8(1977)
  6. Leon, R.T., Ammerman, D.J., Lin, J. and MeCauley, R.D. (1987), Engng. J/Am Inst. Steel Construct, 4th Quarter: 147-155
  7. Leon, R.T. (1990), 'Semi-rigid composite construction', J. Const. Steel Res., 15, 99-120 https://doi.org/10.1016/0143-974X(90)90044-H
  8. Leon, R.T., Hajjar, J.F, and Gustafson, M.A. (1998), 'Seismic response of composite moment-resisting connections', I: Performance. J. Struct. Eng., 124(8), 868-876 https://doi.org/10.1061/(ASCE)0733-9445(1998)124:8(868)
  9. Leon, R.T., Hajjar, J.F. and Gustafson, M.A (1998), 'Seismic response of composite moment-resisting connections', II: Behaviour. J. Struct. Eng., 124(8), 877-885 https://doi.org/10.1061/(ASCE)0733-9445(1998)124:8(877)
  10. Li, T.Q., Moore, D.B., Nethercot, D.A. and Choo, B.S. (1996), 'The experimental behaviour of a full-scale semirigidly connected composite frame: Detailed appraisal', J. Const. Steel Res., 39(3), 193-220 https://doi.org/10.1016/S0143-974X(96)00041-7
  11. Liew, J.Y.R., Teo, T.H. and Shanmugam, N.E. (2004), 'Composite joints subject to reversal of loading-Part 1: Experimental study', J. Const. Steel Res., 60(5), 221-246 https://doi.org/10.1016/j.jcsr.2003.08.010
  12. Liu, J. and Astaneh-Asl, A. (1989), 'Cyclic testing of simple connections includeing effect of slab', J. Struct. Eng., 115(8),1977-1998 https://doi.org/10.1061/(ASCE)0733-9445(1989)115:8(1977)
  13. Plumier, A. and Schleich, J.B. (1993), 'Seismic resistance of steel and composite frame structures', J. Const. Steel Res., 27, 159-176 https://doi.org/10.1016/0143-974X(93)90012-H
  14. Pradhan, A.M. and Bouwkamp, J.G. (1994), 'Structural performance aspects on cyclic behaviour of the composite beam-column joints', In Behaviour of Steel Structures in Seismic Areas STESSA94, ed. EM. Mazzolani and V. Gioncu, E&FN SPaN, London, 221-230
  15. Sheikh, T.M., Deierlein, G.G., Yura, J.A. and Jirsa, J.O. (1989), 'Beam-column moment connections for composite frames: Part I', J. Struct. Eng., ASCE, 115(11), 2858-2876 https://doi.org/10.1061/(ASCE)0733-9445(1989)115:11(2858)
  16. Simoes da Silva, L., Simoes, Rui D. and Cruz, Paulo J.S. (2001), 'Experimental behaviour of end-plate beam-to-column composite joints under monotonical loading', Eng. Struct., 23, 1383-1409 https://doi.org/10.1016/S0141-0296(01)00054-2
  17. Xiao, Y., Choo, B.S. and Nethercot, D.A. (1994), 'Composite connections in steel and concrete - I. Experimental behaviour of composite beam-column connections', J. Const. Steel Res., 31(1), 3-30 https://doi.org/10.1016/0143-974X(94)90021-3
  18. Yang, Li (2004), 'Behaviors study on semi-rigid composite joints under low cyclic loading', M. Eng. Thesis, Nanjing University of Technology
  19. Zandonini, R., Bernuzzi, C. and Bursi, O. (1997), 'Steel and Steel-concrete composite joints subjected to seismic actions', Proc. of Steel Structures in Seismic Areas (Kyoto, August, 1997)

Cited by

  1. Behavior of symmetrically haunched non-prismatic members subjected to temperature changes vol.31, pp.3, 2009, https://doi.org/10.12989/sem.2009.31.3.297