DOI QR코드

DOI QR Code

Experimental study of the torsion of reinforced concrete members

  • Chalioris, Constantin E. (Democritus University of Thrace, Department of Civil Engineering)
  • Received : 2004.11.26
  • Accepted : 2006.04.18
  • Published : 2006.08.20

Abstract

This paper presents the results of an experimental investigation on the behaviour of 56 reinforced concrete beams subjected to pure torsion. The reported results include the behaviour curves, the failure modes and the values of the pre-cracking torsional stiffness, the cracking and ultimate torsional moments and the corresponding twists. The influence of the volume of stirrups, the height to width ratios and the arrangement of longitudinal bars on the torsional behaviour is discussed. In order to describe the entire torsional behaviour of the tested beams, the combination of two different analytical models is used. The prediction of the elastic till the first cracking part is achieved using a smeared crack analysis for plain concrete in torsion, whereas for the description of the post-cracking response the softened truss model is used. A simple modification to the softened truss model to include the effect of confinement is also attempted. Calculated torsional behaviour of the tested beams and 21 beams available in the literature are compared with the experimental ones and a very good agreement is observed.

Keywords

References

  1. Ashour, S.A., Samman, T.A. and Radain, T.A. (1999), 'Torsional behavior of reinforced high-strength concrete deep beams', ACI Struct. J., 96(6), 1049-1058
  2. Belarbi, A. and Hsu, T.C. (1995), 'Constitutive laws of softened concrete in biaxial tension-compression', ACI Struct. J., 92(5), 562-573
  3. Chalioris, C.E. (1999), 'Study of the behaviour and the failure mechanisms of plain and reinforced concrete elements in torsion', PhD dissertation, Department of Civil Engineering, Democritus University of Thrace, Xanthi, Greece
  4. Chalioris, C.E. (2003), 'Cracking and ultimate torque capacity of reinforced concrete beams', Proc. of the Int. Symposia 'Celebrating Concrete: People and Practice', University of Dundee, Scotland, UK, Vol. Role of Concrete Bridges in Sustainable Development, 109-118
  5. Comite Euro-International du Beton - Federation International de la Precontrainte (CEB-FIP) (1993), Model Code 90 for Concrete Structures, Thomas Telford, London
  6. Fang, I.K. and Shiau, J.K. (2004), 'Torsional behavior of normal- and high-strength concrete beams', ACI Struct. J., 101(3), 304-313
  7. Hsu, T.C. (1968), 'Torsion of structural concrete - Behavior of reinforced concrete rectangular members', Torsion of Structural Concrete, SP-18, American Concrete Institute, 261-306
  8. Hsu, T.C. (1993), Unified Theory of Reinforced Concrete, CRC Press, Inc., Boca Raton, Fla
  9. Hsu, T.C. (1996), 'Toward a unified nomenclature for reinforced-concrete theory', J. Struct. Eng., ASCE, 122(3), 275-283 https://doi.org/10.1061/(ASCE)0733-9445(1996)122:3(275)
  10. Hsu, T.C. and Mo, Y.L. (1985), 'Softening of concrete in torsional members - Theory and tests', ACI J., Proc., 82(3), 290-303
  11. Karayannis, C.G. (2000a), 'Smeared crack analysis for plain concrete in torsion', J. Struct. Eng., ASCE, 126(6), 638-645 https://doi.org/10.1061/(ASCE)0733-9445(2000)126:6(638)
  12. Karayannis, C.G. (2000b), 'Nonlinear analysis and tests of steel-fiber concrete beams in torsion', J. Struct. Eng. Mech., 9(4), 323-338 https://doi.org/10.12989/sem.2000.9.4.323
  13. Karayannis, C.G and Chalioris, C.E. (2000a), 'Experimental validation of smeared analysis for plain concrete in torsion', J. Struct. Eng., ASCE, 126(6), 646-653 https://doi.org/10.1061/(ASCE)0733-9445(2000)126:6(646)
  14. Karayannis, C.G. and Chalioris, C.E. (2000b), 'Strength of prestressed concrete beams in torsion', Struct. Eng. Mech., 10(2), 165-180 https://doi.org/10.12989/sem.2000.10.2.165
  15. Mansur, M.A., Nagataki, S., Lee, S.H. and Oosumimoto, Y. (1989), 'Torsional response of reinforced fibrous concrete beams', ACI Struct. J., 86(1), 36-44
  16. Mitchell, D. and Collins, M.P. (1974), 'Diagonal compression field theory - A rational model for structural concrete in pure torsion', ACI J., Proc., 71(8), 396-408
  17. Rahal, K.N. and Collins, M.P. (1995), 'Analysis of sections subjected to combined shear and torsion - A theoretical model', ACI Struct. J., 92(4), 459-469
  18. Rahal, K.N. and Collins, M.P. (1996), 'Simple model for predicting torsional strength of reinforced and prestressed concrete sections', ACI Struct. J., 93(6), 658-666
  19. Rahal, K.N. and Collins, M.P. (2003), 'Combined torsion and bending in reinforced and prestressed concrete beams', ACI Struct. J., 100(2), 157-165
  20. Vecchio, F.J. and Collins, M.P. (1986), 'Modified compression field theory for concrete elements subjected to shear', ACI Struct. J., 83(2), 219-231
  21. Victor, D.J. and Muthukrishnan, R. (1973), 'Effect of stirrups on ultimate torque of reinforced concrete beams', ACI J., Proc., 70(4), 300-306
  22. Wafa, F.F., Shihata, S.A., Ashour, S.A. and Akhtaruzzaman, A.A. (1995), 'Prestressed high-strength concrete beams under torsion', J. Struct. Eng., ASCE, 121(9), 1280-1286 https://doi.org/10.1061/(ASCE)0733-9445(1995)121:9(1280)

Cited by

  1. Torsional strengthening of rectangular and flanged beams using carbon fibre-reinforced-polymers – Experimental study vol.22, pp.1, 2008, https://doi.org/10.1016/j.conbuildmat.2006.09.003
  2. Behavior of reinforced concrete walls subjected to monotonic pure torsion—An experimental study vol.33, pp.9, 2011, https://doi.org/10.1016/j.engstruct.2011.04.022
  3. Torsional behaviour of reinforced concrete beams with ferrocement U-jacketing—Experimental study vol.4, 2016, https://doi.org/10.1016/j.cscm.2015.10.003
  4. Simplified Model for the Torsional Strength of Concrete Beams with GFRP Stirrups vol.19, pp.1, 2015, https://doi.org/10.1061/(ASCE)CC.1943-5614.0000498
  5. Torsional behavior model of steel-fiber-reinforced concrete members modifying fixed-angle softened-truss model vol.45, pp.1, 2013, https://doi.org/10.1016/j.compositesb.2012.09.021
  6. Non-linear analyses model for composite box-girders with corrugated steel webs under torsion vol.14, pp.5, 2013, https://doi.org/10.12989/scs.2013.14.5.409
  7. Experiments and calculation of U-shaped thin-walled RC members under pure torsion vol.106, 2016, https://doi.org/10.1016/j.engstruct.2015.10.019
  8. Experimental study of torsional strength of RC beams constructed with HPFRC composite mortar vol.91, 2015, https://doi.org/10.1016/j.conbuildmat.2015.05.018
  9. Effectiveness of the use of steel fibres on the torsional behaviour of flanged concrete beams vol.31, pp.5, 2009, https://doi.org/10.1016/j.cemconcomp.2009.02.007
  10. Reinforced Concrete Beams with and without FRP Web Reinforcement under Pure Torsion vol.21, pp.3, 2016, https://doi.org/10.1061/(ASCE)BE.1943-5592.0000839
  11. Unified Softened Membrane Model for Torsion in Hollow and Solid Reinforced Concrete Members: Modeling Precracking and Postcracking Behavior vol.141, pp.10, 2015, https://doi.org/10.1061/(ASCE)ST.1943-541X.0001212
  12. Unified rational formula for pre-cracking torsional stiffness of solid and hollow reinforced concrete members vol.99, 2015, https://doi.org/10.1016/j.engstruct.2015.04.038
  13. Analytical model for the torsional behaviour of reinforced concrete beams retrofitted with FRP materials vol.29, pp.12, 2007, https://doi.org/10.1016/j.engstruct.2007.09.009
  14. Experimental investigation of RC beams with rectangular spiral reinforcement in torsion vol.56, 2013, https://doi.org/10.1016/j.engstruct.2013.05.003
  15. Torsional Behavior of Rectangular and Flanged Concrete Beams with FRP Reinforcements vol.141, pp.12, 2015, https://doi.org/10.1061/(ASCE)ST.1943-541X.0001322
  16. Predicting of torsional strength of RC beams by using different artificial neural network algorithms and building codes vol.41, pp.7-8, 2010, https://doi.org/10.1016/j.advengsoft.2010.05.009
  17. A calculation method of cracking moment for the high strength concrete beams under pure torsion vol.36, pp.1, 2011, https://doi.org/10.1007/s12046-011-0001-0
  18. A model to predict the torsional stiffness of ‘U-wrapped’ reinforced concrete beams vol.171, pp.9, 2018, https://doi.org/10.1680/jstbu.16.00226
  19. Torsional Behavior of High-Strength Concrete Beams with Minimum Reinforcement Ratio vol.2019, pp.1687-8094, 2019, https://doi.org/10.1155/2019/1432697
  20. Analytical Study on the Torsional Behavior of Reinforced Concrete Beams Strengthened with FRCM Composite vol.23, pp.2, 2019, https://doi.org/10.1061/(ASCE)CC.1943-5614.0000927
  21. 복부 파형강판을 갖는 복합교량의 비틀림 거동에 대한 비선형 해석 모델 개발 vol.31, pp.a3, 2011, https://doi.org/10.12652/ksce.2011.31.3a.153
  22. A Study on Behavior of Reinforcement by Torsional Behavior of RC Beam vol.10, pp.2, 2006, https://doi.org/10.11004/kosacs.2019.10.2.016
  23. Multi-potential capacity for reinforced concrete members under pure torsion vol.75, pp.3, 2006, https://doi.org/10.12989/sem.2020.75.3.401
  24. Shear and Torsional Design of Reinforced Concrete Members with High-Strength Reinforcement vol.147, pp.2, 2021, https://doi.org/10.1061/(asce)st.1943-541x.0002887
  25. Torsional Behavior Evaluation of Reinforced Concrete Beams Using Artificial Neural Network vol.11, pp.10, 2021, https://doi.org/10.3390/app11104465
  26. Torsional behavior of RC beams strengthened with carbon fiber reinforced polymer composites vol.24, pp.9, 2021, https://doi.org/10.1177/1369433220988625
  27. Seismic fracture analysis of concrete arch dams incorporating the loading rate dependent size effect of concrete vol.79, pp.2, 2021, https://doi.org/10.12989/sem.2021.79.2.169
  28. Comparative analysis of EC2-04 and ACI318-19 strength provisions for reinforced concrete beams under pure torsion vol.1973, pp.1, 2006, https://doi.org/10.1088/1742-6596/1973/1/012224
  29. Torsional behavior of reinforced concrete plates under pure torsion vol.28, pp.3, 2021, https://doi.org/10.12989/cac.2021.28.3.311
  30. Torsional design method used in Eurasia region: A comparative study vol.22, pp.6, 2006, https://doi.org/10.1002/suco.202100136