참고문헌
- Ansys Inc. (2004), Canonsburg, PA 15317. USA. www.ansys.com
- Bayrak, O. and Sheikh, S. (2001), ' Plastic hinge analysis ', J .Struct. Eng., ASCE, 127(9), 1092-1100 https://doi.org/10.1061/(ASCE)0733-9445(2001)127:9(1092)
- Bressler, B. and Gilbert, P.H. (1961), ' Tie requirements for reinforced concrete columns ', ACI J., 58(26), 555-570
- Dodd, L.L. and Restrepo-Posada, J.I. (1995), ' Model for predicting cylic behavior of reinforcing steel ', J. Struct.Eng., ASCE, 121(3), 433-445 https://doi.org/10.1061/(ASCE)0733-9445(1995)121:3(433)
- Eurocode 2 (1991), Design of Concrete Structures. Part 1-1: General Rules and Rules for Buildings, European Committee for Standarization, Bruxelles, Belgium
- Eurocode 3 (1993), Design of Steel Structures. Part 1-1. General Rules and Rules for Building, European Committee for Standarization, Bruxelles, Belgium
- Isaacson, E. and Keller, H.B. (1994), Analysis of Numerical Methods. Dover Publications
- Kent, D.C. and Park, R. (1971),' Flexural members with confined concrete ', Proc. ASCE, 97(ST7), July, 1969-1990
- Mander, J.B., Priestley, M.J.N. and Park, R. (1988),' Theoretical stress-strain model for confined concrete ', J. Struct. Eng., ASCE, 114(8), 1804-1826 https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
- Mau, S.T. and El-Mabsout, M. (1987),' Inelastic buckling of reinforcing bars ', J. Eng. Mech., 115, January 1989
- Monti, G and Nuti, C. (1992), ' Nonlinear cyclic behavior of reinforcing bars including buckling ', J. Struct.Eng., ASCE, 118(12), 3268-3284 https://doi.org/10.1061/(ASCE)0733-9445(1992)118:12(3268)
- Pantazopoulou, S.J. (1998), ' Detailing for reinforcement stability in RC members ', J. Struct. Eng., ASCE, 124(6), 623-632 https://doi.org/10.1061/(ASCE)0733-9445(1998)124:6(623)
- Papia, M., Russo, G. and Zingone (1988),' Instability of longitudinal bars in RC columns ', J. Struct. Eng.,ASCE, 114(2), 445-461 https://doi.org/10.1061/(ASCE)0733-9445(1988)114:2(445)
- Rodriguez, M.E., Botero, J.C. and Villa, J. (1999), ' Cyclic stress-strain behavior of reinforcing steel including effect of buckling ', J. Struct. Eng., ASCE, 125(6), 605-612 https://doi.org/10.1061/(ASCE)0733-9445(1999)125:6(605)
- Sheikh, S.A. (1978), ' Effectiveness of rectangular ties as confinement steel in reinforced concrete columns ', PhD thesis, University of Toronto, Toronto
- Sheikh, S.A and Uzumeri, S.M. (1980), ' Strength and ductility of confined concrete columns ', Proc. ASCE, 1May 1980, 06(ST5), 1079-1102
- Wallace, J.W. and Moehle, J.P. (1989), BIAX: A Computer Program for the Analysis of Reinforced Concrete Sections, Department of Civil Engineering, University of California, Berkeley, 1989
- Watson, S., Zahn, F.A. and Park, R. (1992), ' Confining reinforcement for concrete columns ', J. Struct. Eng., ASCE, 120(6), 1798-1824 https://doi.org/10.1061/(ASCE)0733-9445(1994)120:6(1798)
피인용 문헌
- Local Buckling Analysis of Longitudinal Reinforcing Bars vol.138, pp.1, 2012, https://doi.org/10.1061/(ASCE)ST.1943-541X.0000414
- Approximate expressions for the simulated response of slender longitudinal reinforcement in monotonic compression vol.60, pp.6, 2008, https://doi.org/10.1680/macr.2008.60.6.391
- Approximate expressions for the simulated response of slender longitudinal reinforcement in monotonic compression vol.60, pp.6, 2008, https://doi.org/10.1680/macr.2006.00004