International Journal of Automotive Technology

  • 제7권7호
  • /
  • Pages.853-858
  • /
  • 2006
  • /
  • 1229-9138(pISSN)
  • /
  • 1976-3832(eISSN)
한국자동차공학회 (The Korean Society of Automotive Engineers)
권호 표지

SMOOTHING METHOD OF AUTO-BODY PART CONTOUR FOR THE DIE-FACE DESIGN SYSTEM BASED ON THE CAE PLATFORM

  • Gong, K.J. (Institute of Automobile Body and Die Engineering, Jilin University) ;
  • Guo, W. (Institute of Automobile Body and Die Engineering, Jilin University) ;
  • Hu, P. (Institute of Automobile Body and Die Engineering, Jilin University)
  • 발행 : 2006.12.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The method of die-face design based on the CAE platform for automobile panels can fast modify the die addendum. In contrast with the process of the die-face design based on the CAD platform, there are some special steps for the die-face design based on the CAE platform. The most obvious difference is that the auto-body part contour needs smoothing arlier than the design of addendum surfaces does. It is helpful to improve the design quality of addendum surface. In spite of extensive researches on the smoothing technique, here is still dearth of the published solutions about smoothing the part contour with additional surface. This paper attempts to analyze the difficulties and provides practical solutions. Main results include the algorithm to calculate the segments needing to be smoothed on boundary, the strategy to create the smoothing curve and the procedure of surface generation. The relevant function modules for parametric design are developed. A few examples and suggestions for future work conclude the paper.

키워드

참고문헌

  1. ALTAIR ENGINEER INC. (2004). HyperWorks User's Manual. USA
  2. AUTOFORM ENGINEERING GMBH. (2001). Auto- Form User's Manual. Switzerland
  3. Boehm, W. and Prautzsch, H. (1985). The Insertion Algorithm. Computer Aided Design 17, 2, 58-59 https://doi.org/10.1016/0010-4485(85)90246-5
  4. Cohen, E., Lyche, T. and Schumaker, L. (1985). Algorithms for degree rising of spline ACM tran on graphics 4, 3, 171-181 https://doi.org/10.1145/282957.282962
  5. Gang, S. (2004). Drawn component design for automobile covering parts. Die and Mould Technology, 5, 35-39
  6. Guoping, W., Xueli, W., Lixin, L. and Shihai, D. (2002). The construction of projected-based sweep surface. J. Image and Graphics 7, 2, 150-154
  7. Hohmeyer, M. E. (1991). Skinning rational B-spline curves to construct an interpolatory surface. CVGIP: Graphical Models and Image Processing 53, 6, 511-521 https://doi.org/10.1016/1049-9652(91)90002-2
  8. Kim, H., Oh, S. T. and Yim, J.-H. (2005). Smooth surface extension with curvature bound. Computer Aided Geometric Design, 22, 27-43 https://doi.org/10.1016/j.cagd.2004.08.003
  9. Kim, H. S. (1997). On the construction of a surface from discrete derivative data and its extended surface using the least squares method. Korean J. Comput. Appl. Math., 4, 387-396
  10. Shetty, S. and White, P. P. (1991). Curvature-continuous extensions for rational B-spline curves and surfaces. Computer Aided Design, 23, 484-491 https://doi.org/10.1016/0010-4485(91)90046-Y
  11. The Virtual Try-out Space Co. (2003). PAMSTAMP2G Reference Manual. France
  12. Tiller, W. and Hanson, E. G. (1984). Offsets of two-dimensional profiles. IEEE CG/A, 9, 36-46
  13. Tokuyama, Y. (2000). Skinning-surface generation based on spine-curve control. Visual Computer 16, 2, 134- 140 https://doi.org/10.1007/s003710050202
  14. Wolters, H. J. (2000). Extensions: Extrapolation Methods for CAD. HP Laboratories Technical Report HPL- 2000-37
  15. Xing, Y., Jun, C., Xiaoxiang, S. and Xueyu, Y. (2002). Parametric design research of addendum and blankholder of drawing automobile panel. Die Techniques, 4, 6-9 (in Chinese)