DOI QR코드

DOI QR Code

Effect of Blade Tip Geometry on Heat Transfer Coefficients on Gas Turbine Blade Tips and Near Tip Regions

가스터빈 블레이드 끝단 형상에 따른 블레이드 끝단 및 그 주변에서의 열전달 계수 변화

  • 곽재수 (한국항공대학교 항공우주 및 기계공학부)
  • Published : 2006.04.01

Abstract

Detailed heat transfer coefficient distributions an two. types of gas turbine blade tip, plane tip and squealer tip, were measured using a hue-detection base transient liquid crystals technique.. The heat transfer coefficients an the shroud and near tip regions of the pressure and suction sides af the blade were also. measured. The heat transfer measurements were taken at the three different tip gap clearances af 1.0%, 1.5%, and 2.5% of blade span. Results shaw the overall heat transfer coefficients on the tip and shroud with squealer tip blade were lower than those with plane tip blade. By using squealer tip, however, the reductions af heat transfer coefficients near the tip regions of the pressure and suction sides were nat remarkable.

Keywords

References

  1. Bunker, R. S., Baily, J. C. and Ameri, A. A., 2000, 'Heat Transfer and Flow on the First Stage Blade Tip of a Power Generation Gas Turbine: Part 1: Experimental Results,' Trans. of ASME J. of Turbomachinery, 122, pp. 272-277 https://doi.org/10.1115/1.555444
  2. Bunker, R. S. and Baily, J. C., 2001, 'Effect of Squealer Cavity Depth and Oxidation on Turbine Blade Tip Heat Transfer,' ASME Paper No. 2001-GT-0155
  3. Azad, GM S., Han, J. C., Teng, S. and Boyle, R., 2000, 'Heat Transfer and Pressure Distributions on a Gas Turbine Blade Tip,' Trans. of ASME J. of Turbomachinery, 122, pp. 717-724 https://doi.org/10.1115/1.1308567
  4. Azad, GM S., Han, J. C. and Boyle, R., 2000, 'Heat Transfer and Pressure Distributions on the Squealer Tip of a Gas Turbine Blade,' Trans. of ASME J. of Turbomachinery, 122, pp. 725-732 https://doi.org/10.1115/1.1311284
  5. Azad, GM S., Han, J. C., Bunker, R. S. and Lee, C. P., 2002, 'Effect of Squealer Geometry Arrangement On a Gas Turbine Blade Tip Heat Transfer,' Trans. of ASME J. of Heat Transfer, 124, pp. 452-459 https://doi.org/10.1115/1.1471523
  6. Rhee, D. H., Choi, J. H. and Cho, H. H., 2001, 'Effect of Blade Tip Clearance on Turbine Shroud HeatlMass Transfer,' ASME Paper No. 2001-GT-0158
  7. Jin, P. and Goldstein, R. J., 2002, 'Local Mass/Heat Transfer on a Turbine Blade Tip,' The 9th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, February
  8. Jin, P. and Goldstein, R. J., 2002, 'Local Mass/Heat Transfer on Turbine Blade Near-Tip Surfaces,' ASME Paper No. GT2002-30556
  9. Papa, M., Goldstein, R. J. and Gori, F., 2003, 'Effects of Tip Geometry and Tip Clearance on the Mass/Heat Transfer from a Large-Scale Gas Turbine Blade,' Trans. of ASME J. of Turbomachinery, Vol. 125, pp. 90-96 https://doi.org/10.1115/1.1529190
  10. Acharya, S., Yang, H., Prakash, C. and Bunker, R., 2003, 'Numerical Study of Flow and Heat Transfer on a Blade Tip with Different Leakage Reduction Strategies,' ASME Paper No. GT2003-38617
  11. Saxena, V. and Ekkad, S. V., 2004, 'Effect of Squealer Geometry on Tip Flow and Heat Transfer for a Turbine Blade in a Low Speed Cascade,' Trans. of ASME J. of heat transfer, Vol. 126, pp. 546-553 https://doi.org/10.1115/1.1777580
  12. Yang, H., Chern, H. C. and Han, J. C., 2005, 'Flow and Heat Transfer Prediction on Turbine Rotor with Various Tip Configurations,' AIAA paper, No. 2005-573
  13. Lee, D. H. and Cho, H. H., 2005, 'Heat/Mass Transfer Characteristics on Stationary Turbine Blade and Shroud in a Low Speed Annular Cascadei II ),' Trans. of the KSME B, Vol. 29, pp. 495-503 https://doi.org/10.3795/KSME-B.2005.29.4.495
  14. Kline, S. J. and McClintock, F. A., 1953, 'Describing Uncertainties in Single Sample Experiments,' Mechanical Engineering, Vol. 75, pp. 3-8

Cited by

  1. Numerical Study of Aerodynamics of Turbine Rotor with Leading Edge Modification Near Hub vol.37, pp.8, 2013, https://doi.org/10.3795/KSME-A.2013.37.8.1007