대한기계학회논문집A (Transactions of the Korean Society of Mechanical Engineers A)

  • 제30권4호
  • /
  • Pages.451-456
  • /
  • 2006
  • /
  • 1226-4873(pISSN)
  • /
  • 2288-5226(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

케미컬 밀링을 이용한 실린더 경량화 연구

A Study on the Light Cylinder Using Chemical Milling

  • 발행 : 2006.04.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The process for reducing the weight of the structure is chiefly performed by the machine processing. But, increasing the weight for strength of welding zone and geometrical defect are occurred in machine processing. In this study, chemical milling is applied to reduce the weight of the cylinder. Before chemical milling is applied to the cylinder, specimen testing is performed. After the specimen testing, NaOH 15% is selected to perform the chemical milling. After the chemical milling, the velocity of reagent is 0.0016 mm/min and the thickness of cylinder is about 2.4 mm after chemical milling.

키워드

참고문헌

  1. Yoo, J. T., Lee, J. W., Jang, Y. S. and Yi, Y. M., 2004, 'Buckling Test and Non-linear Analysis of Aluminum Isogrid Panel,' AAAF, 2004 On Board Energetic Equipment, Session 12 Tank
  2. Lee, J. N., 1979, 'Chemical Milling,' The Korean Society of Mechanical Engineers, Vol. 19, No. 4, pp. 273-278
  3. Fadaei, T. A. and Imanian, E., 2004, 'A New Etchant for The Chemical Machining of St304,' Journal of Maerials Processing Technology, Vol. 149, Issues. 1-3, pp. 404-408 https://doi.org/10.1016/j.jmatprotec.2004.02.055
  4. Chen, J. Z. and Wu, S. K., 1999, 'Chemical Machined Thin Fiols of TiNi Shape Memory Alloy,' Materials Chemistry and Physics, Vol. 58, pp. 162-165 https://doi.org/10.1016/S0254-0584(98)00273-9