DOI QR코드

DOI QR Code

Mechanical Properties of Dissimilar Friction Welded Steel Bars in Relation to Post Weld Heat Treatment

이종 마찰용접 강봉재의 후열처리에 따른 기계적 특성

  • Published : 2006.04.01

Abstract

Dissimilar friction welding were produced using 15(mm) diameter solid bar in chrome molybedenum steel(KS SCM440) to carbon steel(KS S45C) to investigate their mechanical properties. The main friction welding parameters were selected to endure good quality welds on the basis of visual examination, tensile tests, Vickers hardness surveys of the bond of area and H.A.Z and microstructure investigations. The specimens were tested as-welded and post-weld heat treated(PWHT). The tensile strength of the friction welded steel bars was increased up to 100% of the S45C base metal under the condition of all heating time. Optimal welding conditions were n=2,000(rpm), $P_1=60(MPa),\;P_2=100(MPa),\;t_1=4(s),\;t_2=5(s)$ when the total upset length is 5.4 and 5.7(mm), respectively. The peak of hardness distribution of the friction welded joints can be eliminated by PWHT. Two different kinds of materials are strongly mixed to show a well-combined structure of macro-particles without any molten material and particle growth or any defects.

Keywords

References

  1. AWS, 1991, 'Welding Handbook,' Vol. 2, pp. 747, pp. 672-763
  2. AWS, 1981, 'Welding Handbook,' Vol. 1, Fundamentals of Welding,' 7th edition, Vol. 1, pp. 153-220
  3. Suh, C. M., Suh, D. Y. and Lee, D. J., 1995, 'A Study on Fatigue Strength in the Friction Welded Joints of HSS-Co to SM55C Catbon Steel(1),' Trans. of the KSME(A), Vol. 19, No. 4, pp. 918-928
  4. Suh, C. M., Suh, D. Y. and Lee, D. J., 1995, 'A Study on Fatigue Strength in the Friction Welded Joints of HSS-Co to SM55C Catbon Steel(2),' Trans. of the KSME(A), Vol. 19, No. 4, pp. 929-940
  5. Tsuchiya, K. and Kawamura, H., 1996, 'Mechanical Properties of Cu-Cr-Zr Alloy and SS316 Joints Fabricated by Friction Welding Method,' Journal of Nuclear Materials, Vol. 233, No. 237, pp. 913-917 https://doi.org/10.1016/S0022-3115(96)00104-3
  6. Oh, S. K., Kong, Y. S., Yoo, I. J. and Kim, I. S., 2000, 'Creep Life Prediction for Dissimilar Friction-Welded-Joints of Turbine Impeller Heat Resisting Steels and AE Evaluation(1)-FRW and AE Evaluation,' Proc. of International Offshore and Polar Eng. Conf., ISOPE, pp. 203-207
  7. Jeong, H. S. and Shinoda, T., 1997, 'Fundamental and Basic Application of Friction Welding,' Journal of KWS, Vol. 15, No. 6, pp. 1-12
  8. Kang, S. B. and Min, T. K., 1988, 'A Study on the Friction Weldability of Carbon Steel(S45C) to Aluminum Alloy(A6063),' Journal of KWS, Vol. 16, No. 2, pp. 153-220
  9. Oh, S. K., Kim, B. A., Kim, S. J. and Nam, S. H., 1988, 'A Study on Friction Welding of SM45C to SCM4 Steel Bars and the Fatigue Properties,' Journal of KSOE, Vol. 2, No. 2, pp. 312-321
  10. Cho, H. S. and Suh, S. J., 1997, 'Friction Welding of Inconel 713C and SCM440,' Journal of KWS, Vol. 15, No. 6, pp. 78-84

Cited by

  1. Friction Welding and AE Characteristics of Magnesium Alloy for Lightweight Ocean Vehicle vol.25, pp.6, 2011, https://doi.org/10.5574/KSOE.2011.25.6.091
  2. Mechanical Property and Process Variables Optimization of Tube-to-Tube Friction Welding for Steel Pipe with 36 mm External Diameter vol.18, pp.2, 2014, https://doi.org/10.9726/kspse.2014.18.2.050