References
- Zelenca, P., Cartellier, W., and Herzog, P., 'Worldwide diesel emission standards, current experience and future needs,' Applied Catalysis B: Environmental 10, 3-28 (1996)
- Hug, H. T., Mayer, A. and Hartenstein, A., 'Off-highway exhaust gas aftertreatment; combining urea-SCR, oxidation catalysis and traps,' SAE paper 930363 (1993)
- Heimrich, M. J., 'Diesel NOx catalytic converter development: A review,' Transactions of the ASME, 118, 668-672 (1996) https://doi.org/10.1115/1.2822684
- Masuda, K., Tsujimura, K., Shinoda, K. and Kato, T., 'Silver-promoted catalyst for removal of NO from emission of diesel engines,' Applied Catalysis B: Environmental 8, 33-40 (1996) https://doi.org/10.1016/0926-3373(95)00051-8
- Nam, C. M. and Gibbs, B. M., 'Application of the Thermal DeNOx process to diesel engine DeNOx: an experimental and kinetic modeling study,' FUEL, 81, 1359-1367 (2002) https://doi.org/10.1016/S0016-2361(02)00025-X
- Nam, C. M. and Gibbs, B. M., 'Selective catalytic reduction of NO by hydrocarbons over Cu/Al2O3 catalysts,' Environmental Sciences, 4(4), 201-208 (2000)
-
Lyon, R. K., 'Method for the reduction of the concentration of NO in combustion effluents using
$NH_3$ ,' U.S. Patent No. 3,900,554 (1975) - Arand, J. K., Palos, R., Muzio, L. J. and Sotter, J. G., 'Urea reduction of NOx in combustion effluents,' U.S. Patent No. 4,208,386 ( 1980)
- Lyon, R. K., 'Thermal DeNOx controlling nitrogen oxides emissions by a noncatalytic process,' Environmental Science and Technology, 21(3), 231-236 (1987) https://doi.org/10.1021/es00157a002
- Kimball-Linne, M. A. and Hanson, R. K., 'Combustion-driven flow reactor studies of Thermal DeNOx reaction kinetics,' Combustion and Flame, 64, 337-351 (1986) https://doi.org/10.1016/0010-2180(86)90150-1
- Miller, J. A. and Bowman, C. T., 'Mechanism and modeling of nitrogen chemistry in combustion,' Prog. Energy Combust. Sci., 15, 287-338 (1989) https://doi.org/10.1016/0360-1285(89)90017-8
- Kasuya, F., G larborg, P., Johnson, J. E. and Dam-Johansen, K., 'The Thermal DeNOx process: Influence of partial pressures and temperature,' Chem. Eng. Sci., 50(9), 1455 -1466 (1995) https://doi.org/10.1016/0009-2509(95)00008-S
- Miyamoto, N., Ogawa, H., Wang, J., Shudo, T. and Yamazaki, K., 'Diesel NOx reduction with ammonium deoxidizing agents directly injected into the cylinder,' International Journal of Vehicle Design, 16( 1), 71-79 (1995)
-
Jodal, M., Neilsen, C., Hulgaard, T. and Ostergaard, K., 'Pilot-scale experiments with
$NH_3$ and urea as reductants in SNCR of NO,' Proceedings of the Combustion Institute, 23, 237-243 (1990) -
Gullett, B. K., Bruce, K. R., Hansen, W. F. and Hofman, J. E., 'Sorbent/urea slurry injection for simultaneous
$SO_2/NOx$ removal,' Environmental Progress, 11(2), 155-162 (1992) https://doi.org/10.1002/ep.670110225 - Caton, J. A. and Siebers, D. L., 'Comparison of NO removal by Cyanuric acid and by ammonia,' Combustion Science and Technology, 65, 277-293 (1989) https://doi.org/10.1080/00102208908924054
- Koger, S. and Bockhorn, H., 'NOx formation from ammonia, hydrogen cyanide, pyrrole and carprolactam under incinerator conditions,' Proceedings of the Combustion Institute, 30, 1201-1209 (2005)
- Miller, J. A. and Bowman, C. T., 'Kinetic modeling of the reduction of nitric oxide in combustion products by isocyanic acid,' International Journal of Chemical Kinetics, 23, 289-313 (1991) https://doi.org/10.1002/kin.550230403
- Duo, W., Dam-Johansen, K. and Ostergaard, K., 'Widening the temperature range of the Thermal DeNOx process: an experimental investigation,' Proceedings of the Combustion Institute, 23, 297-303 (1990)
- Heywood, J. B., Internal combustion engine fundamentals. McGraw-Hill Book Co, 461-669 ( 1988)
- Kjaergaard, K., Glarborg, P., Dam-Johansen, K. and Miller, J. A., 'Pressure effects on the Thermal DeNOx process,' Proceedings of the Combustion Institute, 26, 2067-2074 (1996)