DOI QR코드

DOI QR Code

Cryogenic Insulation Technique for HTS Transformer

고온초전도 변압기용 극저온 절연기술

  • 김상현 (경상대 공대 전기공학과) ;
  • 천현권 (경상대 공대 전기공학과)
  • Published : 2006.03.01

Abstract

In the response to the demand for electrical energy , much effort was given to develop and commercialize high temperature superconducting (HTS) power equipments has been made around the world. Especially, HTS transformer is one of the most promising devices . but the cryogenic insulation technology should be established during development Hence many types of dielectric tests should be carried out to understand the dielectric phenomena at cryogenic temperature and to gather various dielectric data. Among the many types dielectric tests . the characteristic of barrier effect were conducted using simulated electrode after analysing the insulating configuration of HTS transformer main winding. The influence of a barrier on the dielectric strength was measured according to the position of the harriet the number of the barrier and thickness or the barrier. It was shown that the effectiveness . namely the ratio of the breakdown voltage in presence of barrier to the voltage without barrier, is highest when the barrier is placed at the needle electrode side. On the contrary, in the case of having the barrier between the electrodes, the harrier was placed between the electrodes the characteristic was even improved slightly.

Keywords

References

  1. S.W. Schwenterly and S.P. Mehta, M.S. Walker. R.H. Jones. "Development of HTS Power Transformers for the 21st Century: Waukesa Electric Systems/IGC-SuperPower/RG&E/ORNL SPI collaboration." Physica C: Superconductivity. Vol.382. pp.1-6. 2002 https://doi.org/10.1016/S0921-4534(02)01168-1
  2. Sung-Hoon Kim. Woo-Seok Kim. Kyeong-Dal Choi. Hyeong-Gil. Joo. Gye-Won Hong. Jin-Ho Han. Hee-Gyoun Lee. Jung-Ho Park. Hee-Suck Song and Song-yop Hahn "Characteristic tests of a 1 MVA single phase HTS transformer with concentrically arranged windings." IEEE Trans. on Applied Superconductivity. Vol. 15. No.2, pp. 2214-2217, 2005 https://doi.org/10.1109/TASC.2005.849615
  3. L.Masur et al. "Long length manufacturing of high performance BSCCO-2223 tape for the Detroit Edison Power Cable Project," IEEE Trans on Applied Superconductivity, Vol. 11, pp. 3256-3260, 2001 https://doi.org/10.1109/77.919757
  4. Ho-Myung Chang, Yeon Suk Choi, Van Sciver, S.W and Baldwin, TL, "Cryogenic cooling temperature of HTS transformers for compactness and efficiency", IEEE Trans. on Applied Superconductivity, Vol. 13, No.2, pp. 2298-2301, 2003 https://doi.org/10.1109/TASC.2003.813086
  5. O.S. Gefie and S.M. Lebeder, "Barrier effect in solid dielectrics", 9th Int. Symp. on High Voltage Enginnering, paper 10. 70, raz(Austria). 1999
  6. A.Beroual and A. Boubaker, "Influence of barriers on the lighting and switching impulse strength of mean air gap in point/plane arrangements", IEEE Trans. on Elec. Insul. Vol. 26, No.6, pp.1130-1139, 1991 https://doi.org/10.1109/14.108150
  7. A. Zouaghi and A. Beroual, "Barrier effect on the time lag to breakdown of transformer oil gap under lightning impulse voltage", Conf. on Electr. Insul Diel. Phen, Atlanta, pp. 640-643, 1997