DOI QR코드

DOI QR Code

Numerical Study on the Variation of Axial Thrust of Rotating Disc with Pump-Out Vane

POV가 부착된 회전 원판의 축추력 변화에 관한 연구

  • 성선모 (서울대학교 대학원 기계항공공학부) ;
  • 강신형 (서울대학교 기계항공공학부)
  • Published : 2006.03.01

Abstract

Flows in the cavity with pump out vane are calculated using the CFX-Tascflow CFD code. flow calculations are performed for different values of vane height, numbers, leakage flow rate, and rotational speed. The flow is very complex and three dimensional with strong vortex and leakage flow over the vane. The variations of pressure coefficient and K-factor with these parameters and resulting effects on the thrust and torque are studied. The present study contributes to showing the capability of flow simulation of back cavity with pump-out vane. The calculated results are good enough to be used back cavity design.

Keywords

References

  1. Schallhorn, P. A. and Majumdar, A. K., 1997, 'Numerical Prediction of Pressure Distribution Along the Front and Back Face of a Rotating Disc with and without Blades,' AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, AIAA-1997-3098
  2. Kurokawa, J. and Sakuma, M., 1988, 'Flow in a Narrow Gap Along an Enclosed Rotating Disk with Through-flow,' JSME International Journal, Ser.2, Vol. 31, No. 2, pp. 243-251
  3. Kang, S. H., Son, J. R., Jung, J. S. and Seong, S. M., 2004, 'Optimal Design of Balance Cavity in Rocket Turbo-pump,' MOST Technical Report
  4. Iino, T., Sato, H. and Miyashiro, H., 1980, 'Hydraulic Axial Thrust in Multistage Centrifugal Pumps,' Trans. of the ASME, Journal of Fluids Engineering, Vol. 102, No. 1, pp. 64-69 https://doi.org/10.1115/1.3240626
  5. Kurokawa, J., 1976, 'A New Device to Control Axial Thrust of Radial Flow Turbomachinery,' Bulletin of the JSME, Vol. 19, No. 128, pp. 110-117 https://doi.org/10.1299/jsme1958.19.110

Cited by

  1. Numerical Investigation of Back Vane Design and Its Impact on Pump Performance vol.139, pp.12, 2017, https://doi.org/10.1115/1.4037281