References
- F. K. Chang, R. A. Scott, and G. S. Springer, 'The Effect of Laminate Configuration on Characteristic Lengths and Rail Shear Strength', J. of Composite Materials, Vol. 18, 1984, pp. 290-296 https://doi.org/10.1177/002199838401800307
- J. H. Kweon, H.S. Ahn, and J.H. Choi, 'A New Method to Determine the Characteristic Lengths of Composite Joints without Testing', Composite Structures, Vol. 66, 2004, pp. 305-315 https://doi.org/10.1016/j.compstruct.2004.04.053
- P. P. Camanho and F. L. Matthews, 'A Progressive Damage Model for Mechanically Fastened Joints in Composite Laminates', J. of Composite Materials, Vol. 33, 1999, pp. 2248-2280 https://doi.org/10.1177/002199839903302402
- Z. Hashin, 'Failure Criteria for Unidirectional Fiber Composites', J. of Applied Mechanics, Vol. 47, 1980, pp. 328-334
- W. J. Quinn and F. L. Matthews, 'The Effect of Stacking Sequence on the Pin-Bearing Strength in Glass Fiber Reinforced Plastic', J. of Composite Materials, Vol. 11, 1977, pp. 139-145 https://doi.org/10.1177/002199837701100202
- H. S. Wang, C. L. Hung and F. C. Chang, 'Bearing Failure of Bolted Composite Joints. Part I : Experimental Characterization', J. of Composite Materials, Vol. 30, No. 12, 1996, pp. 1284-1313 https://doi.org/10.1177/002199839603001201
- 김광수, 유재석, 안재모, 장영순, '일방향 복합재료 single lap 접합 조인트의 파손모드 및 파손 강도, I. 실험', 복합재료학회지, 제17권, 제6호, 2004, pp. 14-21
- 김광수, 이영무, 김천곤, '일방향 복합재료 single lap 접합 조인트의 파손모드 및 파손 강도 II. 파손예측', 복합재료학회지, 제18권, 제1호, 2005, pp. 1-9
- J. F. P. Owens and P. Lee-Sullivan, 'Stiffness Behaviour due to Fracture in Adhesively Bonded Composite-to-Aluminum Joints I. Theoretical Model', Int. J. of Adhesion & Adhesives, Vol. 20, 2000, pp. 39-45 https://doi.org/10.1016/S0143-7496(99)00013-5
- J. F. P. Owens, P. Lee-Sullivan, 'Stiffness Behaviour due to Fracture in Adhesively Bonded Composite-to-Aluminum Joints II. Experimental', Int. J. of Adhesion & Adhesives, Vol. 20, 2000, pp. 47-58 https://doi.org/10.1016/S0143-7496(99)00014-7
- L. J. Hart-Smith, 'Adhesive-Bonding Double-Lap Joints', NASA CR-112235, 1973
- J. H. Choi and D. G. Lee, 'The Torque Transmission Capabilities of the Adhesively Bonded Tubular Single Lap Joint and the Double Lap Joint', J. of Adhesion, Vol. 44, 1994, pp. 197-212 https://doi.org/10.1080/00218469408027077
- G. Kelly, 'Load Transfer in Hybrid(Bonded/Bolted) Composite Single-lap Joint', Composite Structures, 2004, pp. 1-9
- L. J. Hart-Smith, 'Bonded-Bolted Composite Joints', J. of Aircraft, Vol. 22, No. 11, 1985, pp. 993-1000 https://doi.org/10.2514/3.45237
- Cytec Engineering Materials, Ltd, 'FM73 Toughened Epoxy Film'
Cited by
- A Case Study for Improving the Manufacturing Process of Composite Main Wing for Small Aircraft vol.23, pp.1, 2015, https://doi.org/10.12985/ksaa.2015.23.1.096