한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제23권2호
  • /
  • Pages.73-80
  • /
  • 2006
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지

요인 실험계획법 회귀분석을 이용한 소경 엔드밀의 공구수명에 대한 연구

A Study on tool life in the high speed machining of small-size end mill by factorial design of experiments and regression model

  • 임표 (전북대학교 대학원 기계공학과) ;
  • 박상윤 (전북대학교 대학원 기계공학과) ;
  • 양균의 (전북대학교 기계항공시스템공학과)
  • 발행 : 2006.02.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

High speed machining(HSM) technique is widely used in the appliance, automobile part and mold industries, because it has many advantages such as good quality, low cost and rapid machining time. But it also has problems such as tool breakage, smooth tool path, and so on. In particular, small size end mill is easy to break, so it must be changed before interrupting operation. Generally, the tool life of small size end mill is affected by the milling conditions whose selected parameters are spindle speed, feedrate, and width of cut. The experiments were carried out by full factorial design of experiments using an orthogonal array. This paper shows optimal combination and mathematical model for tool life, Therefore, the analysis of variance(ANOVA) is employed to analyze the main effects and the interactions of these milling parameters and the second-order polynomial regression model with three independent variables is estimated to predict tool life by multiple regression analysis.

키워드

참고문헌

  1. Dewes, R. C. and AspinWall, D. K., 'A Review of Ultra High Speed Milling of Hardened Steels,' Materials Processing Technology, Vol. 69, pp. 1-17, 1997 https://doi.org/10.1016/S0924-0136(96)00042-8
  2. Lee, D. W., Jeong, Y. H., Kang, M. C., Lee, K. Y., Kim, J. S., Kim, K. G. and Kim, S. W., 'Advanced Machining Technology for Die Manufacturing I,' Journal of Korean Society of Precision Engineering, Vol. 17, No.4, pp. 48-68, 2000
  3. Nakamura, S., 'High speed spindles for machine tools,' Int, J. Japan Soc. Prec. Eng. Vol. 30, No. 4, pp. 291-294, 1996
  4. Choi, C. H., 'High Speed Machining & Technology of Tooling for Die and Mold Making,' Journal of Korean Society of Precision Engineering, Vol. 18, No.8, pp. 18-23, 2001
  5. Lim, P., Lee, H. K. and Yang, G. E, 'High Speed Machining of the thin surface parts using liquid metal and selection of machining condition by Latin Square Method,' Journal of Korean Society of Precision Engineering, Vol. 22, No. 10, pp. 99-106, 2005
  6. Bae, H. J., 'Analysis of Working factors for improvement of surface Roughness on high speed end-milling,' Journal of Korean Society of Precision Engineering, Vol. 21, No.6, pp. 52-59, 2000
  7. Lim, P., Jang, D. K., Lee, H. K. and Yang, G. E., 'High speed machining of cavity pattern in prehardened mold using the small size tool,' Journal of Korean Society of Precision Engineering, Vol. 21, No.1, pp. 133-139, 2004
  8. Alauddin, M., I. A., El-Baradie, M. A., 'Tool life for end milling steel (190BHN),' Journal of Materials Processing Technology, No. 68 pp. 50-59, 1997 https://doi.org/10.1016/S0924-0136(96)02533-2
  9. Choudhury, I. A. and El-Baradie, M. A., 'Tool-life prediction model by design of experiments for turning high strength steel (290BHN),' Journal of Materials Processing Technology, No. 77, pp. 319-326, 1998 https://doi.org/10.1016/S0924-0136(97)00435-4
  10. Chen, T. C. and Hong, H., 'Comparison of the tool life of tungsten carbides coated by multi-layer TiCN and TiAlCN for end mills using the Taguchi method,' Journal of Materials Processing Technology, No. 123 pp. 1-4, 2002 https://doi.org/10.1016/S0924-0136(01)01152-9
  11. Sharman, A., Dewes, R. C. and Aspinwall, D. K., 'Tool life when high speed ball nose end milling Inconel $718^{TM}$,' Journal of Materials Processing Technology, No. 118 pp. 29-35, 2001 https://doi.org/10.1016/S0924-0136(01)00855-X
  12. Tosun, N. and Ozler, L., 'A study of tool life in hot machining using articial neural networks and regression analysis method,' Journal of Materials Processing Technology, No. 124 pp. 99-104, 2002 https://doi.org/10.1016/S0924-0136(02)00086-9
  13. Park, S. H., 'Morden Design of Experiments,' Minyongsa, pp. 305-329, 2001
  14. Park, S. H., 'Regression Analysis,' Minyongsa, pp. 175-318, 2003