Abstract
To evaluate the pipe failure impact, current methodologies consider only a broken pipe as the impacted area. However, these approaches are accurate if the broken pipe is the only area isolated from tile system. Depending on the number and locations of on-off valves, more pipes which are adjacent to a broken pipe may be isolated. Using the concept of Segment suggested by Walski, the methodology evaluating the pipe failure impact incorporated with on-off valve locations has been suggested by Jun. However, a segment cannot account for all possible pipe failure impacted areas since it does not consider additional failures, namely the network topological failure and the hydraulic pressure failure. For this reason, a methodology which can consider the network topology and hydraulic pressure limitation as well as on-off valve locations is suggested. The suggested methodology is applied to a real network to verify its applicability As results, it is found that a single pipe failure can affect huge areas depending on the configuration of on-off valves and the network topology. Thus, the applicability of the suggested methodology for evaluating the pipe failure impacts on a water distribution network is proved.
기존의 상수관 파괴로 인한 피해 영역의 산정에서는 파괴된 관만을 피해영역으로 고려하였으나 이는 파괴된 관만이 차폐되었을 경우에만 정확하다 할 수 있다. 차폐에 이용되는 밸브의 배치에 따라 추가로 더 많은 관들이 파괴된 관과 함께 차폐가 될 수 있으며 Walski에 의하여 제안된 segment 개념으로 이러한 추가적인 관의 차폐를 고려할 수 있는 방법이 Jun에 의해서 개발되었다. 그러나, segment 개념으로 찾아질 수 있는 피해영역보다 더 많은 부분이 관 파괴의 영향을 받을 수 있으며, 이는 관들의 연결형상에 의한 차폐와 용수 수요지점에서 적정한 압력수두를 확보하지 못하여 발생하는 추가적인 피해에 기인한다 본 연구에서는 밸브의 위치에 따른 추가적인 피해영역과 함께 관들의 연결형상 그리고 압력수두에 따른 피해를 순차적으로 고려할 수 있는 방법을 제안하여 제안된 방법을 실제 상수관망에 적용하여 적용성을 검토한다 실제 상수관망에 적용한 결과 한 개의 상수관 파괴에 의한 피해 영역이 밸브위치와 용수노선의 설계에 따라 많은 지역에 피해를 발생시킬 수 있음을 보여 주고 있다. 따라서 본 연구에서 제안된 방법을 적용하여 산정된 상수관 파괴에 따른 피해영역이 현실을 정확히 반영함을 알 수 있었다.