A Design of Predistorter for Controlling the Amplitude of Low-Frequency IM Signals

저주파 혼변조 신호의 크기 조절에 의한 전치 왜곡 선형화기 설계

  • Jang Mi-Ae (School of Electronics Engineering, Kumoh National Institute of Technology) ;
  • Kim Young (School of Electronics Engineering, Kumoh National Institute of Technology)
  • 장미애 (금오공과대학교 전자공학부) ;
  • 김영 (금오공과대학교 전자공학부)
  • Published : 2006.01.01

Abstract

In this paper, a new predistortion linearizer for controlling the amplitude of low frequency intermodulation distortion signals is proposed. The low frequency intermodulation distortion(IMD) components are generated by harmonic generator. A vector modulator, modulate fundamental signal with low frequency IMD signals, generates predistortion IMD signals and controls amplitude and phase of them with modulation factors. As a result, this predistorter is suppressed IMD signals of power amplifier effectively. The predistortion linearizer has been manufactured to operate in cellular base-station transmitting band($869{\sim}894\;MHz$). The experimental results show that IMD3 of power amplifier are improved more than 20 dB for CW two-tone signals. Also, it's improved the adjacent channel power ratio(ACPR) more than 10 dB for IS-95 CDMA IFA signals.

본 논문에서는 저주파 혼변조 신호의 크기만을 조절하여 혼변조 신호를 제어하는 새로운 전치 왜곡 선형화기를 제안하였다. 이 방법은 고조파 발생기 출력에서 생성된 저주파 혼변조 신호를 주 신호와 진폭 변조시켜 혼변조 신호를 만들었으며, 저주파 가변 이득 조절기를 이용하여 혼변조 신호의 크기와 위상을 조절하였다. 제안한 전치 왜곡 선형화기는 국내 셀룰러 기지국 송신 주파수($869{\sim}894\;MHz$) 반송파 2 톤 신호를 전력 증폭기에 인가하여 입력 신호 레벨을 변화시켰을 때, 3차 혼변조 신호는 20 dB 이상 개선되었으며, IS-95 CDMA 1FA 신호입력 시에는 중심 주파수에서 ${\pm}885\;kHz$${\pm}1.25;MHz$ 이격 지점에서 인접 채널 전력 비(ACPR: Adjacent Channel Power Ratio)를 10 dB 이상 개선시켰다.

Keywords

References

  1. P. B. Kenington, High-linearity RF Amplifier Design, Norwood, MA, Artech House, 2000
  2. S. C. Cripps, Advanced Techniques in RF Power Amplifier Design, Norwood, MA, Artech House, 2002
  3. C. W. Fan, K. K. M. Cheng, 'Amplifier linearization using simultaneous harmonic and baseband injection', IEEE Microwave and Wireless Components Letters, vol. 11, no. 10, pp. 404-406, Oct. 2001 https://doi.org/10.1109/7260.959309
  4. Y. Yang, B. Kim, 'A new linear amplifier using low-frequency second-order intermodulation component feedforwarding', IEEE Microwave and Guided Wave Letters, vol. 9, no. 10, pp. 419-421, Oct. 1999 https://doi.org/10.1109/75.798035
  5. K. J. Cho, D. H. Hang, S. H. Kim, J. H. Kim, B. J. Lee, N. Y. Kim, J. C. Lee, and S. P. Stapleton, 'Multi-order predistortion of power amplifiers using a second harmonic based technique', IEEE Microwave and Wireless Components Letters, vol. 13, no. 10, pp. 452-454, Oct. 2003 https://doi.org/10.1109/LMWC.2003.815186
  6. C. W. Fan, K. K. M. Cheng, 'Theoretical and experimental study of amplifier linearization based on harmonic and baseband signal injection technique', IEEE Trans. on Microwave Theory and Techniques, vol. 50, no. 7, pp. 1801-1806, Jul. 2002 https://doi.org/10.1109/TMTT.2002.800441
  7. Y. Hu, J. C. Mollier, and J. Obregon, 'A new method of third-order intermodulation reduction in nonlinear microwave systems', IEEE Trans. on Microwave Theory and Techniques, vol. MTT-34, no. 2, pp. 245-250, Feb. 1986
  8. W. Huang, R. E. Saad, 'Novel third-order distortion generator with residual IM2 suppression capabilities', IEEE Trans. on Microwave Theory and Techniques, vol. 46, no. 12, pp. 2372-2382, Dec. 1998 https://doi.org/10.1109/22.739225
  9. Y. Kim, H. S. Jang, S. U. Kim, I. S. Chang, and Y. C. Jeong, 'A new predistorter using low frequency intermodulation signals injection of a harmonic generator', IEICE Transactions on Electronics, vol. E86-C, no. 8, pp. 1709-1714, Aug. 2003
  10. Tri T. Ha, Solid-State Microwave Amplifiers Design, John Wiley, 1981