Abstract
The effects of operation conditions, such as bed temperature, temperature rising rate, particle size, moisture content and so on, on thermo-chemical conversion of waste wood have been determined in a micro fixed bed gasifier. The samples were waste wood-chips such as pine, oak, acacia and ginkgo. The thinning timbers used as reactants in the experiments had $35wt\%$ moisture content, $0.5wt\%$ ash content and 4,550 kcal/kg heating value on a dry basis. A typical product distribution was a $40wt\%$ liquid, $20wt\%$ solid, and $40wt\%$ dry syngas. The syngas concentration was affected by operation conditions and average syngas concentration was $H_2:40vol\%,\;CO:30vol\%,\;CH_4:10vol\%$.
고정층 마이크로반응기를 이용하여 폐목재의 열화학적 전환에 영향을 미치는 운전 조건들-반응온도, 승온속도, 입도, 수분함량의 영향을 조사하였다. 사용한 시료는 소나무, 참나무, 아카시아, 은행나무의 폐목재칩을 사용하였다. 실험에 사용한 시료의 평균 수분 함량은 $35wt\%$이었으며 다른 바이오매스와 마찬가지로 회분함량은 $0.5wt\%$ 이하로 나타났다. 시료들의 평균 발열량은 4,550kca1/kg이었다. 열화학적 전환에 따라 발생된 생성물분포는 시료종류, 수분함량, 입도와 같이 시료의 물성에 따라 다소 달랐으며 평균적으로 액상 $40wt\%$, 고상 $20wt\%$,그리고 기상 $40wt\%$를 보였다. 생성가스의 조성은 거의 모든 실험변수에 영향을 받았으며, 평균적으로 수소 $40wt\%$, 일산화탄소 $30wt\%$이었으며 메탄은 $10wt\%$ 정도이었다.