대한산업공학회지 (Journal of Korean Institute of Industrial Engineers)

  • 제32권4호
  • /
  • Pages.291-297
  • /
  • 2006
  • /
  • 1225-0988(pISSN)
  • /
  • 2234-6457(eISSN)
대한산업공학회 (Korean Institute of Industrial Engineers)
권호 표지

중소기업을 위한 6시그마 모형 및 사례 연구

A Six Sigma Model for Small and Medium SizedCompanies and Case Studies

  • 황영제 (부경대학교 시스템경영공학과) ;
  • 권혁무 (부경대학교 시스템경영공학과) ;
  • 홍성훈 (전북대학교 산업정보시스템공학과, 공업기술연구센터) ;
  • 이민구 (충남대학교 정보통계학과)
  • Hwang, Young Je (Department of Systems Management and Engineering, Pukyong National University) ;
  • Kwon, Hyuck Moo (Department of Systems Management and Engineering, Pukyong National University) ;
  • Hong, Sung Hoon (Department of Industrial & Information Systems Engineering, Research Center of Industrial Technology,Chonbuk National University) ;
  • Lee, Min Koo (Department of Information and Statistics, Chungnam National University)
  • 발행 : 2006.12.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Since the six sigma strategy was first introduced to Korean enterprises in 1997, it has been taken as an important business strategy to strengthen the competitiveness of major Korean companies under the global competitive environment. These major companies also demand their suppliers to implement six sigma. But small and medium sized companies have several barriers to overcome for successful implementation of six sigma. First, the financial status is not so sound to support initial expenses for launching six sigma. Second, physical and human resources are not sufficient for driving six sigma. And finally, the infrastructure is not well established to manage and support the six sigma program. In this paper, we suggest a method to overcome these barriers and propose a model for establishing six sigma in a small and medium sized company. We also provide some practical case studies.

키워드

참고문헌

  1. Bertels, T. (2004), Faster Development for Europe Small/Medium Business, Europe Six Sigma & Quality Article Archive, iSix Sigma
  2. Cha, W-J., and Choi, Y-S. (2003), Noise Reduction of a Small DIC Motor Using Six Sigma Process, Journal of the Korean Society for Noise and Vibration Engineering, 13(7), 532-538 https://doi.org/10.5050/KSNVN.2003.13.7.532
  3. Davis, A. G. (2003), Six Sigma for Small Company, Quality, 42(8), 20-21
  4. Hong, S. H., Kim, S. B., Kwon, H. M., and Lee, M. K. (1999), Quality Information: Six Sigma Business Breakthrough Strategy, Journal of the Korean Society for Quality Management, 27(1),223-231
  5. Jung, D-H., and Hong, S-J. (2004), The Six Sigma Management Model for Small and Medium-Sized Companies Using the Management by Process, Journal of the Korean Society for Quality Management, 32(4),140-155
  6. Kim, G. S. (1999), A Study on the Quality Management Performance through the Six -sigma Program, Journal of the Korean Society for Quality Management, 27(4), 266-279
  7. Kim, J-P. and Park, B-C. (2001), A Case Study on 6 Sigma Management for Small-and Medium-Sized Companies: Focusing on Improvement ofInlet Chamfer of Brake Master Cylinder, Quality Innovation, 2(2),82-97
  8. Koo, I-S., Kim, T-S. and Lim, I-S. (2003), An Empirical Study on the Six Sigma Effects on Quality Circles, Journal of the Korean Society for Quality Management, 31(1), 1-10
  9. Kwon, H-M., Kim, J- T. and Choi, J-H. (2000), Case Study: a Six Sigma Project for Decreasing Waste Concrete In a Housing Construction Site, Quality Innovation, 1(1) 4-9
  10. Lee, M-K. and Kwag, H-C. (2005), A Case Study of Six Sigma Project for Improving TIP Life Time in a Spot Welding Process, Journal of the Korean Society for Quality Management, 33(1), 88-98
  11. Park, J-Y. (2003), Reducing the Rate of Defective to Improve a Welding Condition - Based on Six Sigma Process, Journal of the Korean Society for Quality Management, 31(1) 123-131
  12. Sin, D-S. and An, Y -J. (2003), An Empirical Study on the Major Factors of Implementing Six Sigma Successfully Through Black Belts, Journal of the Korean Society for Quality Management, 31(4), 81-94
  13. Wessel, G. and Burcher, P. (2004), Six Sigma for Small and Midiumsized enterprise, TQM Magazine, 16(4), 264-272 https://doi.org/10.1108/09544780410541918