공업화학 (Applied Chemistry for Engineering)

  • 제17권6호
  • /
  • Pages.638-643
  • /
  • 2006
  • /
  • 1225-0112(pISSN)
  • /
  • 2288-4505(eISSN)
한국공업화학회 (The Korean Society of Industrial and Engineering Chemistry)
권호 표지

과잉수소 반응분위기에서 Dichloromethane 열분해 반응경로에 관한 연구

Pyrolytic Reaction Pathway of Dichloromethane in Excess Hydrogen

  • Won, Yang-Soo (Department of Environmental Engineering, Yeungnam University)
  • 투고 : 2006.08.29
  • 심사 : 2006.10.18
  • 발행 : 2006.12.10
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

과잉수소 반응조건하에서 dichloromethane ($CH_{2}Cl_{2}$)의 열분해 생성물질의 반응경로를 규명하기 위해서 등온 관형반응기를 이용하여 무산소, 1 atm, 반응온도 $525{\sim}900^{\circ}C$, 반응시간 0.3~2.0 sec에서 반응을 수행하였다. $CH_{2}Cl_{2}$ : $H_{2}$ mole 비는 전 실험에서 4 : 96으로 유지하였으며 반응물 $CH_{2}Cl_{2}$ 분해 및 생성물의 농도는 on-line GC를 이용하여 정량 분석하였으며, 미량의 미지 화합물은 batch 시료로써 GC/MS로 정성 분석하였다. 반응시간 1 sec를 기준으로 반응물 $CH_{2}Cl_{2}$는 $600^{\circ}C$ 부근에서 분해가 시작되어 $780^{\circ}C$에서 99% 이상 분해되었다. 반응 주요생성물은 $CH_{3}Cl$, $CH_{4}$, $C_{2}H_{4}$, $C_{2}H_{6}$, HCl이 생성되었으며, 미량 생성물로는 $CHClCCl_{2}$, CHClCHCl, $CH_{2}CHCl$, $C_{2}H_{2}$가 생성되었다. 본 연구에서는 반응물질 분해 및 중간생성물 분포 특성과 열역학 및 반응속도 원리를 근거로 주요 생성물질 반응경로를 제시하였으며, 그 결과는 $CH_{2}Cl_{2}$ 및 유사한 염화탄화수소 화합물 열분해시 일어날 수 있는 열분해공정 이해를 위한 자료로 이용된다.

Pyrolytic reaction study of dichloromethane ($CH_{2}Cl_{2}$) in excess hydrogen was performed to investigate pyrolytic reaction pathways at a pressure of 1 atm with residence times of 0.3~2.0 sec in the temperature range of $525{\sim}900^{\circ}C$. A constant feed molar ratio $CH_{2}Cl_{2}$:$H_{2}$ of 4:96 was maintained through the experiment. Reagent loss and product formation were monitored by using an on-line gas chromatograph, where batch samples were analyzed by GC/MS. Complete destruction(99%) of the parent reagent was observed at temperature near $780^{\circ}C$ with residence time over 1 sec. Major products observed were $CH_{3}Cl$, $CH_{4}$, $C_{2}H_{4}$, $C_{2}H_{6}$, and HCl. Minor products included $CHClCCl_{2}$, CHClCHCl, $CH_{2}CHCl$, and $C_{2}H_{2}$. The pyrolytic reaction pathways to describe the important features of intermediate product distributions and reagent loss, based upon thermodynamic and kinetic principles, were suggested. The results of this work provided a better understanding of pyrolytic decomposition processes which occur during the pyrolysis of $CH_{2}Cl_{2}$ and similar chlorinated methanes.

키워드

참고문헌

  1. D. J. Pausteinbach, The Risk Assessment of Environmental and Human Health Hazards, John Wiley & Sons (1990)
  2. Y. S. Won, B. W. Park, B. S. Ahn, and K. Y. Park, J. Soc. Waste Management, 16, 187 (1999)
  3. Y. S. Won and J. W. Bozzelli, Combust. Sci. Tech., 85, 345 (1992) https://doi.org/10.1080/00102209208947177
  4. Y. P. Wu and Y. S. Won, J. Ind. Eng. Chem., 9, 775 (2003)
  5. Y. P. Wu and Y. S. Won, J. Hazardous Materials, B105, 63 (2003)
  6. Y. P. Wu and Y. S. Won, Combustion and Flame, 122, 312 (2000) https://doi.org/10.1016/S0010-2180(00)00116-4
  7. Y. S. Won, D. H. Han, T. Stuchinskaya, W. S. Park, and H. S. Lee, Radiation Phys. Chem., 63, 165 (2002) https://doi.org/10.1016/S0969-806X(01)00237-7
  8. D. H. Han, Y. S. Won, T. Stuchinskaya, and W. S. Park, Radiation Phys. Chem., 67, 51 (2003) https://doi.org/10.1016/S0969-806X(02)00405-X
  9. Y. S. Won, J. KSEE, 15, 527(1993)
  10. Y. S. Won and S. P. Choi, J. KSEE, 17, 167 (1995)
  11. 환경부, 폐기물관리법 (2006)
  12. J. M. Smith, Chemical Engineering Kinetics, 3rd ed. McGraw Hill Co. (1981)
  13. S. C. Chuang and J. W. Bozzelli, Environ. Sci. Tech., 20, 568 (1986) https://doi.org/10.1021/es00148a004
  14. S. C. Chuang and J. W. Bozzelli, Ind. Eng. Chem. Proc. Des., 25, 317 (1986) https://doi.org/10.1021/i200032a052
  15. G. P. Semeluk and R. B. Bernstein, J. Am. Chem. Soc., 76, 3793 (1954) https://doi.org/10.1021/ja01643a060
  16. G. P. Semeluk and R. B. Bernstein, J. Am. Chem. Soc., 79, 46 (1957) https://doi.org/10.1021/ja01558a010
  17. S. W. Benson, Thermochemical Kinetics, John Wiley & Son (1976)
  18. Y. S. Won, B. W. Park, B. S. Ahn, and K. Y. Park, J. Soc. Waste Management, 15, 40 (1998)
  19. P. H. Taylor and B. Dellinger, Environ. Sci. Tech., 22, 438 (1988) https://doi.org/10.1021/es00169a012
  20. B. Dellinger, J. L. Torres, W. A. Rubey, D. L. Hall, and J. L. Graham, EPA-600/S2-84-138 (1984)
  21. I. P. Herman, F. Magnotta, and R. J. Buss, J. Chem. Phys., 79, 1789 (1983) https://doi.org/10.1063/1.446024
  22. M. Weissman and S. W. Benson, Int. J. Chem. Kinet., 16, 307 (1984) https://doi.org/10.1002/kin.550160403
  23. P. H. Taylor, B. Dellinger, and D. A. Tirey, Int. J. Chem. Kinet., 23, 1051 (1991) https://doi.org/10.1002/kin.550231202
  24. R. C. Reid, J. M. Prausnitz, and B. E. Poling, The Properties of Gases and Liquids, 4th ed. McGraw Hill (1988)
  25. M. Weissman and S. W. Benson, J. Phys. Chem., 87, 243 (1983) https://doi.org/10.1021/j100225a014
  26. D. W. Setser and T. Lee, J. Am. Chem. Soc., 89, 5799 (1985)
  27. J. L. Graham, D. L. Hall, and B. Dellinger, Environ. Sci. Tech., 20, 703 (1986) https://doi.org/10.1021/es00149a009
  28. Y. S. Won and J. W. Bozzelli, Am. Soc. Mech. Eng., HTD 104, 131 (1988)