과제정보
연구 과제 주관 기관 : RIST
참고문헌
- Chen, S. J., Yeh, C. H., and Chu, J. M. (1996). Ductile steel beam-to-column connections for seismic resistance. J. Struct. Engrg., ASCE, 122(11), pp. 1292-1299 https://doi.org/10.1061/(ASCE)0733-9445(1996)122:11(1292)
- Chi, B. and Uang, C.-M. (2002). Cyclic response and design recommendations of reduced beam section moment connections with deep column. J. Struct. Engrg., ASCE, 128(4), pp. 464-473 https://doi.org/10.1061/(ASCE)0733-9445(2002)128:4(464)
- Choi, J. H., Stojadinovic, B., and Goel, S. C. (2000). Development of free flange moment connection, Technical Report UMCEE 00-15, Dept. of Civil and Environmental Engineering, Univ. of Michigan, Ann Arbor, Mich
- El-Tawil, S. (2000). Panel zone yielding in steel moment connections. Engrg. J., 37(3), AISC, Third Quarter, pp. 120-131
- Engelhardt, M. D., Winneberger, T., Zekany, A. J., and Potyraj, T. J. (1998). Experimental investigations of dogbone moment connections. Engrg. J., 35(4), AISC, Fourth Quarter, pp. 128-139
- Engelhardt, M. D., Venti, M. J., Fry, G. T., Jones, S. L., and Holliday, S. D. (2000). Behavior and design of radius cut reduced beam section connections, SAC/BD-00/17, SAC Joint Venture, Sacramento, Calif
- Iwankiw, N. (1997). Ultimate strength consideration for seismic design of the reduced beam section (internal plastic hinge).' Engrg. J. 34(1), AISC, First Quarter, pp. 3-16
- Jones, S. L., Fry, G. T., and Engelhardt, M. D. (2002). Experimental evaluation of cyclically loaded reduced beam section moment connections. J. Struct. Engrg., ASCE, 128(4), pp. 441-451 https://doi.org/10.1061/(ASCE)0733-9445(2002)128:4(441)
- Kawano, A. (1984). 'Inelastic behavior of low-rise frame based on a weak beam-to-column connection philosophy to earthquake motion.' Proc. Eighth World Conference on Earthquake Engineering, Vol. IV, San Francisco, Calif., pp. 519-526
- Krawinkler, H. (1978). Shear in beam-column joints in seismic design of steel frames. Engrg. J. 15(3), AISC, Third Quarter, pp. 82-91
- Krawinkler, H., Gupta, A., Medina, R., and Ruco, N. (2000). Loading histories for seismic performance testing of SMRF components and assemblies, Report No. SAC/BD-00/10. SAC Joint Venture, Sacramento, Calif
- Plumier, A. (1997). The dogbone: back to the future. Engrg. J. 34(2), pp. 61-67
- Roeder, C. W. (2002). General issues influencing connection performance. J. Struct. Engrg., ASCE, 128(4), pp. 420-428 https://doi.org/10.1061/(ASCE)0733-9445(2002)128:4(420)
- SAC (2000). Seismic design criteria for new moment-resisting steel frame construction, Report No. FEMA 350, SAC Joint Venture, Sacramento, Calif
- American Institute of Steel Construction (AISC). (1997 and 2002). Seismic provisions for structural steel buildings, American Institute of Steel Construction, Chicago
- Suita, K., Inoue, K., and Kanoh, N. (2002). 'Strength and deformation of bolted beam-to-column connection accompanied by panel zone yield.' Proc. Fourth Taiwan-Japan-Korea Joint Seminar on Earthquake Engineering for Building Structures, Oct. 25-26, Seoul, Korea, pp. 67-75
- Tsai, K. C. and Chen, W.-Z. (2000). Seismic response of steel reduced beam section to weak panel zone moment joints. Proc. Third International Conference STESSA 2000, 21-24 August, Montreal, Canada
- Uang, C.-M. (1993). An evaluation of two-level seismic design procedure. Earthquake Spectra, 9(1), pp. 121-135 https://doi.org/10.1193/1.1585708
- Uang, C.-M. and Fan, C.-C. (2001). Cyclic stability criteria for steel moment connections with reduced beam section. J. Struct. Engrg., ASCE, 127(9), pp. 1021-1027 https://doi.org/10.1061/(ASCE)0733-9445(2001)127:9(1021)
- Yu, Q. S., Gilton, C., and Uang, C.-M. (2000). Cyclic response of RBS moment connections: loading sequence and lateral bracing effects, SAC/BD-00/22, SAC Joint Venture, Sacramento, Calif
- Zekioglu, A., Mozaffarian, H., Chang, K. L., and Uang, C.-M. (1997). Designing after Northridge. Modern Steel Constr., 37(3), pp. 36-42