Journal of Korean Institute of Industrial Engineers (대한산업공학회지)

Korean Institute of Industrial Engineers (대한산업공학회)
권호 표지

Development of Internet-based Simulator for Designing of Reconfigurable Machine Tools

재구성 가능 공작기계 설계를 위한 인터넷 기반 시뮬레이터 개발

  • Hong, Dongphyo (Department of Industrial Systems and Information Engineering, Korea University) ;
  • Seo, Yoonho (Department of Industrial Systems and Information Engineering, Korea University)
  • 홍동표 (고려대학교 산업시스템정보공학과) ;
  • 서윤호 (고려대학교 산업시스템정보공학과)
  • Published : 2006.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

Reconfigurability of machine tools is one of the critical factors to realize the responsive manufacturing systems to satisfy the mass customization production. This paper presents the methods to model the reconfigurable machine tools (RMTs) on Internet in response to change in the machining requirements. Specifically, the structure and motion model of machine tools using module combination rules and connectivity graph are developed. And we developed Internet-based simulator for designing of RMTs (ISD-RMT). In response to the user requirements, various structures of RMTs can be derived using the module combination rules and connectivity graph relationships. In addition, the user can verify generating structures through the control and simulation procedures.

Keywords

References

  1. Delmia, Virtual NC, http://www.delmia.com
  2. Ehmann, K. F., DeVor, R. E., De Meter, E. C., Dornfeld, D., Kapoor, S. G., Ni, J., Rajurkar, K., Shin, Y., and Sutherland, J. (1997), A Framework for a Virtual Machine Tool(VMT), Trans. of NAMRI/SME, XXI, 143-148
  3. Katz, R. and Moon, Y. M. (2000), Virtual Arch Type Reconfigurable Machine Tool Design, Report of NSF ERC for RMS
  4. Kwon, s. Y. et al. (2003), The Rise of Mass Customization and Treatments of Enterprises (in Korea), CEO Information Report of SERI(in Korea), (415), 1-25
  5. Landers, R. G., Min, B. K., and Koren, Y. (2001), Reconfigurable Machine Tools, Annals of the CIRP, 50(1), 269-274 https://doi.org/10.1016/S0007-8506(07)62120-9
  6. Lee, C. H. (2005), Trends of Machine Tools in Europe, Monthly Machine Tools Magazine(in Korea), May (148), Online
  7. Moon, Y. M. and Kota, S. (2002), Design of Reconfigurable Machine Tools, Transactions of the ASME, 124, 480-483 https://doi.org/10.1115/1.1454101
  8. NSF ERC-RMS, http://erc.engin.umich.edu/
  9. Shimizu, S. (2004), Problems and Solutions Techniques for Cutting Machine Tools, Monthly Mechanical Engineering Magazine(in Korea), April, 120-153
  10. Seo, Y. H., Kim, D. Y., and Suh, S. H. (2005), Development of Web-based CAM System, Int. Journal of Adv. Manufacturing Tech., Online, 1433-3015
  11. Shinno, H. and Ito, Y. (1984), Generating method for structural configuration of machine tools(1st paper, Generation using variant design method), Trans. of JSME, 50(449), 213-221 https://doi.org/10.1299/kikaic.50.213
  12. Shinno, H. and Ito, Y. (1986), Generating method for structural configuration of machine tools (3rd paper, Variant design using directed graph), Trans. of JSME, 52(474), 788-793
  13. Suh, S. H., Seo, Y. H., Lee, S. M., Choi, T. H., Jeong, G. S., and Kim, D. Y. (2003), Modelling and Implementation of Internet-Based Virtual Machine Tools, Int. Journal of Adv. Manufacturing Tech., 21, 516-522 https://doi.org/10.1007/s001700300061
  14. Technomatix, eM-Workplace, http://www.tecnomatix.com