한국자동차공학회논문집 (Transactions of the Korean Society of Automotive Engineers)

  • 제14권1호
  • /
  • Pages.144-152
  • /
  • 2006
  • /
  • 1225-6382(pISSN)
  • /
  • 2234-0149(eISSN)
한국자동차공학회 (The Korean Society of Automotive Engineers)
권호 표지

직접분사식 가솔린 엔진에서 분할분사 및 배기가스 재순환의 효과

The Effects of Split-Injection and EGR on the Combustion Characteristics of a DISI Engine

  • 문석수 (한국과학기술원 기계공학과) ;
  • 최재준 (한국과학기술원 기계공학과) ;
  • ;
  • 배충식 (한국과학기술원 기계공학과)
  • 발행 : 2006.01.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Split injection has been known to reduce total hydrocarbon (THC) emission level and increase engine performance under certain operating conditions 1, 2). Exhaust Gas Recirculation (EGR) is a common technique adopted for nirtric oxides (NOx) reduction by the dilution of intake air, despite a sacrifice of simultaneous increase in THC and decrease in engine performance3). Thus, using split injection with adequate EGR may improve the emission level of UBHC, NOx and the engine performance compared to that of single-injection with or without EGR cases. The purpose of this study is to investigate the engine performance and emission levels at various engine operating conditions and injection methods when it is applied with EGR. The characteristics of single-injection and split-injection were investigated with various engine loads and EGR rates. The engine speed is changed from 800rpm to 1200rpm to investigate how the combustion characteristics are changing with increasing engine speed.

키워드

참고문헌

  1. T. Kitagawa, H. Kido, K.-S. Kim, K. Fujioka and N. Nakamura, 'Characteristics of Combustion in Stratified Mixture,' SAE 2003-01-1808, 2003
  2. J. Yang and R. W. Anderson, 'Fuel Injection Strategies to Increase Full-Load Torque Output of a Direct-Injection SI Engine,' SAE 980495, 1998
  3. F. (Frank) Zhao, D. L. Harrington and M.-C. Lai, Automotive Gasoline Direct-Injection Engines, SAE, pp.171-177, 2002
  4. K. Kuwahara, K. Veda and H. Ando, 'Mixing Control Strategy for Engine Performance Improvement in a Gasoline Direct Injection Engine,' SAE 980158, 1998
  5. N. Miyamoto, H. Ogawa, T. Shudo and F. Takeyama, 'Combustion and Emissions in a New Concept DI Stratified Charge Engine with Two-Stage Fuel Injection,' SAE 940675, 1994
  6. F. (Frank) Zhao, D. L. Harrington and M.-C. Lai, Automotive Gasoline Direct-Injection Engines, SAE, pp.88, 295-299, 2002
  7. J. B. Heywood, Internal Combustion Engine Fundamentals, McGraw-Hill, 1998
  8. G. H. Abd-Alla, 'Using Exhaust Gas Recirculation in Internal Combustion Engines: a Review,' Energy Conversion and Management 43, pp.1027-1042, 2002 https://doi.org/10.1016/S0196-8904(01)00091-7
  9. N. Ladommatos, S. M. Abdelhalim, H. Zhao and Z. Hu. 'The Dilution, Chemical, and Thermal Effects of Exhaust Gas Recirculation on Diesel Engine Emissions Part1-2,' SAE 961165-961167, 1996
  10. K. T. Yeom, Y. M. Woo, J. Y. Jang, Y. K. Park and C. S. Bae, 'Performance and Emission Characteristics of Liquid-Phase LPG Injecion Engine with Different EGR Rate,' Transactions of KSAE, Vol.11, No.5, pp.7-14, 2003
  11. K. Kawajiri, T. Yonezawa, H. Ohuchi, M. Sumida and H. Katashiba, 'Study of Interaction Between Spray and Air Motion, and Spray Wall Impingement,' SAE 2002-01-0836, 2002