References
- Chinmulgund, M., Inturi, R. B. et al., 1995, 'Effect of Ar Gas Pressure on Growth, Structure, and Mechanical Properties of Sputtered Ti, AI, Ti Al, and Ti3Al Films,' Thin Solid Films, Vol. 270, pp.260-263 https://doi.org/10.1016/0040-6090(95)06990-9
-
Fitch, J. T., Bjorkman, C. H. et al., 1989, 'Intrinsic Stress and Stress Gradients at the
$SiO_2/Si$ Interface in Structures Prepared by Thermal Oxidation of Si and Subjected to Rapic Thermal Annealing,' J. Vac. Sci. Technol. B, Vol. 7, No. 4, pp. 775-781 https://doi.org/10.1116/1.584599 - Gauthier, M. M., 1995, Engineering Materials Handbook (ASM desk edt.), Materials Park, OH
- Harms, U., Kempen L. et al., 1998, 'Influence of Stress in Thin Film Modulus Measurements by the Vibrating Reed Technique,' Thin Solid Films, Vol. 323, pp. 153-157 https://doi.org/10.1016/S0040-6090(97)01026-2
- Harris, C. M., 1995, Shock and Vibration Handbook (4th Edt.), McGraw-Hill, New York, pp.7.25-7.49
- Hess, P., 1996, 'Laser Diagnostics of Mechanical and Elastic Properties of Silicon and Carbon Films,' Appl. Surf Sci., Vol. 106, pp.429-437 https://doi.org/10.1016/S0169-4332(96)00369-8
- Hwang, H. Y., Kim, Y. K., Kim, C., Kwon, Y. -D. and Choi, W., 2003, 'Thermo-Viscoelastic Residual Stress Analysis of Metal Linear- Inserted Composite Cylinders,' KSME International Journal, Vol. 17, No.2, pp. 171-180 https://doi.org/10.1007/BF02984387
-
Irene, E. A. and Tierney, E., 1982, 'A Viscous Flow Model to Explain the Appearance of High Density Thermal
$SiO_2$ at Low Oxidation Temperatures,' J. Electrochem. Soc., Vol. 129, No. 11, pp.2594-2597 https://doi.org/10.1149/1.2123617 -
Katz, A. and Dautremont-Smith, W. C., 1990, 'Stress Measurements of
$Pt/Ti/SiO_2/inP$ Systems: In Situ Measurements Through Sintering and After Rapid Thermal Processing,' J. Appl. Phys., Vol. 67, No. 10, pp. 6237-6246 https://doi.org/10.1063/1.345190 - Kim, M. T., 1996, 'Influence of Substrates on the Elastic Reaction of Films for the Microindentation Tests,' Thin Solid Films, Vol. 283, pp.12-16 https://doi.org/10.1016/0040-6090(95)08498-3
- Low, T. S. and Guo, W., 1995, 'Modeling of a Three-Layer Piezoelectric Bimorph Beam with Hysteresis,' J. MEMS, Vol. 4, No.4, pp.234-237 https://doi.org/10.1109/84.475550
- Mo, Y., Tanaka, T., Inoue, K. et al., 2003, 'Front-End Processor Using BBD Distributed Delay-Sum Architecture for Micromachined Ultrasonic Sensor Array,' J. MEMS, Vol. 12, No. 12, pp. 506-512 https://doi.org/10.1109/JMEMS.2003.815840
- Nayfeh, S. A., 0000, 'Damping of flexural vibration in the plane of lamination of elasticviscoelastic sandwich beams,' J. Sound and Vibration, in press
- Okuyama, M., 2001, 'Electronic devices using the ferroelectric thin film,' T. IEE Japan, Vol. 121-E, pp. 537-541. (in Japanese)
- Pietrzakowski, M., 2001, 'Active Damping of Beams by Oiezoelectric System : Effects of Bonding Layer Properties,' Int. J. Solids and Structures, Vol. 38, pp. 7885-7897 https://doi.org/10.1016/S0020-7683(01)00105-6
- Sengupta, S. S., Park, S. M. et al., 1998, 'Origins and Evolution of Stress Development in SolGel Derived Thin Layers and Multideposited Coatings of Lead Titanate,' J. Appl. Phys., Vol. 83, No.4, pp. 2291-2296 https://doi.org/10.1063/1.366971
-
Spierings, G. A. C. M., Dormans, G. J. M. et aI., 1995, 'Stresses in
$Pt/Pb(Zr, Ti)O_3/Pt$ ThinFilm Stacks for Integrated Ferroelectric Capacitors,' J. Appl. Phys., Vol. 78, No.3, pp. 1926-1933 https://doi.org/10.1063/1.360230 - Sze. ed, S.M., 1994, Semiconductor Sensors, Wiley Inter-Science, New York
-
Timosenko, S. and Woinowsky-Krieger, S., 1959, Theory of Plates and Shells (
$2^nd$ Edt.), McGraw-Hill, New York, pp. 30 - Townsend, P. H., Barnett D. M. et al., 1987, 'Elastic Relationships in Layered Composite Media with Approximation for the Case of Thin Films on a Thick Substrate,' J. Appl. Phys., Vol. 62, No. 11, pp. 4438-4444 https://doi.org/10.1063/1.339082